The first part of this two-part study introduces an approach for a numerical model of the composite manufacturing method light resin transfer moulding. Discussion of process physics and relevant literature is used to develop a coupled finite element and infusion software simulation of both the structural and flow elements of the method, with the aim of producing an accurate and comprehensive model. This theoretical overview of the model acts as a precursor to the final part of the research where results are presented and verified and a wind energy case-study application will be demonstrated.
BiotMA. General theory of three-dimensional consolidation. J Appl Phys1941; 12(2): 155–164.
2.
CairnsDSHumbertDRMandellJF. Modeling of resin transfer molding of composite materials with oriented unidirectional plies. Compos Part A Appl Sci1999; 30(3): 375–383.
3.
SaouabABreardJLoryP. Injection simulations of thick composite parts manufactured by the RTM process. Compos Sci Technol2001; 61(3): 445–451.
4.
AbbassiAShahnazariMR. Numerical modeling of mold filling and curing in non-isothermal RTM process. Appl Therm Eng2004; 24(16): 2453–2465.
5.
CairnsDSMastbergenDB. Process modeling and validation of resin infusion type manufacturing. J Adv Mater Covina2007; 39(3): 26–34.
6.
BickertonSBuntainMJ. Modeling forces generated within rigid liquid composite molding tools. Part B: numerical analysis. Compos Part A Appl Sci2007; 38(7): 1742–1754.
7.
KellyPABickertonS. A comprehensive filling and tooling force analysis for rigid mould LCM processes. Compos Part A Appl Sci2009; 40(11): 1685–1697.
8.
WalbranWABickertonSKellyPA. Measurements of normal stress distributions experienced by rigid liquid composite moulding tools. Compos Part A Appl Sci2009; 40(8): 1119–1133.
9.
BuntainMJBickertonS. Modeling forces generated within rigid liquid composite molding tools. Part A: experimental study. Compos Part A Appl Sci2007; 38(7): 1729–1741.
10.
HammamiAGebartBR. Model for vacuum infusion moulding process. Plast Rub Compos Pro1998; 27(4): 185–189.
11.
GebartBRLidstromP. Measurement of in-plane permeability of anisotropic fiber reinforcements. Polym Compos1996; 17(1): 43–51.
12.
CorreiaNCRobitailleFLongAC. Analysis of the vacuum infusion moulding process: I. Analytical formulation. Compos Part A Appl Sci2005; 36(12): 1645–1656.
13.
CaiZGutowskiT. The 3-D deformation-behavior of a lubricated fiber bundle. J Compos Mater1992; 26(8): 1207–1237.
14.
YenilmezBSenanMSozerEM. Variation of part thickness and compaction pressure in vacuum infusion process. Compos Sci Technol2009; 69(11–12): 1710–1719.
15.
ModiDJohnsonMLongA. Analysis of pressure profile and flow progression in the vacuum infusion process. Compos Sci Technol2009; 69(9): 1458–1464.
