Nanocomposites of polycarbonate filled with untreated and modified silica nanoparticles were melt mixed and injection molded with a low melt temperature. The effects of modified silica and low-temperature melting on the morphology, mechanical property, and thermostability of composites were investigated. Scanning electron microscope images showed that uniform dispersion of agglomerates was formed by low-temperature melt blending. A slight reinforcing and toughening effect on tensile behavior of composites was obtained, and the modification of nanoparticles made the effect more remarkable. The storage modulus of composites measured by dynamic mechanical analysis increased observably as a function of silica content, especially for the composites with modified silica, but the Tg value changed little. Thermogravimetric analysis presented that thermostability improved dramatically after adding silica nanoparticles. In addition, the incorporation of modified silica into matrix showed a more significant improvement in thermostability at low loading.
FuSYFengXQLaukeB. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Compos Part B Eng2008; 39: 933–961.
5.
MaitiSShrivastavaNKSuinS. A strategy for achieving low percolation and high electrical conductivity in melt-blended polycarbonate (PC)/multiwall carbon nanotube (MWCNT) nanocomposites: Electrical and thermo-mechanical properties. Express Polym Lett2013; 7: 505–518.
StojanovicDOrlovicAMarkovicS. Nanosilica/PMMA composites obtained by the modification of silica nanoparticles in a surpercritical carbon dioxide-ethanol mixture. J Mater Sci2009; 44: 6223–6232.
ZhuZKYangYYinJ. Preparation and properties of organosoluble polyimide/silica hybrid materials by sol-gel process. J Appl Polym Sci1999; 73: 2977–2984.
14.
OuYCYangFYuZZ. A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization. J Polym Sci Part B Polym Phys1998; 36: 789–795.
15.
YangYHDanY. Preparation of PMMA/SiO2 composite particles via emulsion polymerization. Colloid Polym Sci2003; 281: 794–799.
16.
BikiarisDNPapageorgiouGZPavlidouE. Preparation by melt mixing and characterization of isotactic polypropylene/SiO2 nanocomposites containing untreated and surface-treated nanoparticles. J Appl Polym Sci2006; 100: 2684–2696.
KontouENiaounakisM. Thermo-mechanical properties of LLDPE/SiO2 nanocomposites. Polymer2006; 47: 1267–1280.
25.
LuoWBYangTQ. Computer simulation of conic-shaped patterns on fracture surfaces of polymers. J Appl Polym Sci2003; 89: 1722–1725.
26.
ChristmannAIennyPQuantinJC. Mechanical behaviour at large strain of polycarbonate nanocomposites during uniaxial tensile test. Polymer2011; 52: 4033–4044.
27.
GuHGuoYWongSY. Effect of interphase and strain-rate on the tensile properties of polyamide 6 reinforced with functionalized silica nanoparticles. Compos Sci Technol2013; 75: 62–69.
28.
RongMZZhangMQZhengYX. Improvement of tensile properties of nano-SiO2/PP composites in relation to percolation mechanism. Polymer2001; 42: 3301–3304.
29.
SuberoJNingZGhadiriM. Effect of interface energy on the impact strength of agglomerates. Powder Technol1999; 105: 66–73.
30.
MotaungTESaladinoMLLuytAS. The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetic of polycarbonate. Compos Sci Technol2012; 73: 34–39.
31.
GoertzenWKKesslerMR. Dynamic mechanical analysis of fumed silica/cyanate ester nanocomposites. Compos Part A Appl Sci Manuf2008; 39: 761–768.
32.
VassiliouAAChrissafisKBikiarisDN. In situ prepared PET nanocomposites: Effect of organically modified montmorillonite and fumed silica nanoparticles on PET physical properties and thermal degradation kinetics. Thermochim Acta2010; 50: 21–29.
33.
VassiliouAAChrissafisKBikiarisDN. In situ prepared PBSu/SiO2 nanocomposites. Study of thermal degradation mechanism. Thermochim Acta2009; 49: 120–128.
34.
KashiwagiTDuFMDouglasJF. Nanoparticle networks reduce the flammability of polymer nanocomposites. Nat Mater2005; 4: 928–933.
35.
JangBNWilkieCA. A TGA/FTIR and mass spectral study on the thermal degradation of bisphenol A polycarbonate. Polym Degrad Stab2004; 86: 419–430.
36.
SaladinoMLMotaungTELuytAS. The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA. Polym Degrad Stab2012; 97: 452–459.
37.
MotaungTELuytASSaladinoML. Study of morphology, mechanical properties, and thermal degradation of polycarbonate-titania nanocomposites as function of titania crystalline phase and content. Polym Compos2013; 34: 164–172.
