Abstract
Kenaf and sisal fibres were selected for the development of natural fibre-reinforced thermoplastic composites because they are in abundance in South Africa. These materials can be used in the building industry, where good mechanical and fire resistance properties are required for structural and non-structural applications. High load bearing, moisture and fire can negatively affect the properties of these composites and decrease their performance. The effect of water glass, maleic anhydride-grafted-polypropylene (MAPP) treatment and fibre loadings on mechanical and thermal properties as well as fire resistance of kenaf and sisal fibre-reinforced polypropylene composites were investigated. The fibre-reinforced polypropylene composites were produced by injection and compression moulding processes. A significant improvement of the tensile strength and modulus of kenaf fibre composites was more pronounced when compared to sisal fibre composites. However, the water glass has a slight negative influence on mechanical properties of fibre/polypropylene matrix composites but showed better fire resistance and thermal properties when compared to the untreated fibre/polypropylene composites. Generally, the impact strength of fibre/polypropylene composites decreased with the addition of MAPP. The low impact strength could be the results of weak interfacial bond strength between the fibre and the matrix. The total heat release was reduced by water glass treatment due to the non-flammable polysilicate coating, while the average mass loss rate was slightly reduced by MAPP.
Get full access to this article
View all access options for this article.