Low Reynolds number flow of a viscous fluid through bundles in non-crimp stitched fabrics is considered for different arrangements of the fibres within the bundles. Using a previous derived model, two-dimensional Navier–Stokes solutions are sampled for the flow between a few fibres with a subsequent minimisation of the dissipation rate in the total system of fibres. Based on the detailed geometry of the fabrics flow induced elastic deformations of the fibre bundles are then derived and the overall permeability is computed for different pressure gradients. The permeability of random arrays of a large number of as well mono-dispersed as poly-dispersed fibres increases as the flow-induced deformation increases and despite the relative shift of the fibres is small the overall change in permeability is essential. For a system with gaps between bundles the change in permeability depends on the orientation of the flow field with respect to the geometry studied while for a regular packing the alteration in permeability is negligible.
LundströmTS. The permeability of non-crimp-stitched fabrics. Compos Part A: Appl Sci Manuf2000; 31: 1345–1353.
2.
LundströmTSFrishfeldsVJakovicsA. A statistical approach to permeability of clustered fibre reinforcements. J Compos Mater2004; 38: 1137–1149.
3.
NordlundMLundströmTS. Numerical study of the local permeability of noncrimp fabrics. J Compos Mater2005; 39: 929–947.
4.
SimacekPNeacsuVAdvaniSG. A phenomenological model for fibre tow saturation of dual scale fabrics in liquid composite molding. Polym Compos2010; 31: 1881–1889.
5.
TanHPillaiKM. Fast liquid composite molding simulation of unsaturated flow in dual-scale fibre mats using the imbibition characteristics of a fabric-based unit cell. Polym Compos2010; 31: 1790–1807.
TanHPillaiKM. Multiscale modeling of unsaturated flow in dual-scale fibre preforms of liquid composite molding I: isothermal flows. Compos Part A: Appl Sci Manuf2012; 43: 1–13.
8.
TanHPillaiKM. Multiscale modeling of unsaturated flow of dual-scale fibre preform in liquid composite molding II: non-isothermal flows. Compos Part A: Appl Sci Manuf2012; 43: 14–28.
9.
TanHPillaiKM. Multiscale modeling of unsaturated flow in dual-scale fibre preforms of liquid composite molding III: reactive flows. Compos Part A: Appl Sci Manuf2012; 43: 29–44.
10.
ChenXPapathanasiouTD. On the variability of the Kozeny constant for saturated flow across unidirectional disordered fibre arrays. Compos Part A: Appl Sci Manuf2006; 37: 836–846.
11.
ChenXPapathanasiouTD. Micro-scale modeling of axial flow through unidirectional disordered fibre arrays. Compos Sci Technol2007; 67: 1286–1293.
12.
ChenXPapathanasiouD. The transverse permeability of disordered fibre arrays: a statistical correlation in terms of the mean nearest interfibre spacing. Transp Porous Med2008; 71: 233–251.
13.
ChohraMAdvaniSGGokceA. Modeling of filtration through multiple layers of dual scale fibrous porous media. Polym Compos2006; 27: 570–581.
14.
HwangWRAdvaniSG. Numerical simulations of Stokes-Brinkman equations for permeability prediction of dual-scale fibrous porous media. Phys Fluids2010; 22: 113101–113101.
15.
ChenYFRodriguezAMinaieB. A methodology to determine permeability distribution of a preform in resin transfer molding process. J Reinf Plast Compos2011; 30: 169–178.
16.
AnderssonHMLundströmTSGebartBR. Flow enhancing layers in the vacuum infusion process. Polym Compos2002; 23: 895–901.
17.
AnderssonHMLundströmTSGebartBR. Numerical model for vacuum infusion manufacturing of polymer composites. Numer Meth Heat Fluid Flow2003; 13(2-3): 383–394.
18.
LawrenceJMDevillardMAdvaniSG. Design and testing of a new injection approach for liquid composite molding. J Reinf Plast Compos2004; 23(15): 1625–1638.
19.
DevillardMHsiaoK-TAdvaniSG. Flow sensing and control strategies to address race-tracking disturbances in resin transfer molding – Part II: automation and validation. Compos Part A: Appl Sci Manuf2005; 36(11): 1581–1589.
MoutonSTeissandierDSébastianPNadeauJP. Manufacturing requirements in design: The RTM process in aeronautics. Compos Part A: Appl Manuf2010; 41(1): 125–130.
22.
SharmaSWetzelKK. Process development issues of glass-carbon hybrid-reinforced polymer composite wind turbine blades. J Compos Mater2010; 44(4): 437–456.
23.
ParkCHWooLII. Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review. J Reinf Plast Compos2011; 30(11): 957–977.
24.
HellströmJGIFrishfeldsVLundströmTS. Mechanisms of flow induced deformation of porous media. J Fluid Mech2010; 664: 220–237.
25.
LundströmTSFrishfeldsVJakovicsA. Bubble formation and motion in non-crimp fabrics with perturbed bundle geometry. Compos Part A2010; 41(1): 83–92.
26.
BerlyandLPanchenkoA. Strong and weak blow-up of the viscous dissipation rates for concentrated suspensions. J Fluid Mech2007; 578: 1–34.
27.
LundströmTSGebartBR. Effect of perturbation of fibre architecture on permeability inside fibre tows. J Composite Mater1995; 29: 424–443.
28.
GebartBR. Permeability of unidirectional reinforcements for RTM. J Composite Mater1992; 26: 1100–1133.
29.
TorreAIBajasHCiazynskiDDurvilleDWeissKP. Mechanical-electrical modeling of stretching experiment on 45 Nb3Sn strands CICCs. IEEE Trans Appl Superconduct2010; 21(3): 2042–2045.
30.
DurvilleD. Contact-friction modeling within elastic beam assemblies: an application to knot tightening. Comput Mech2012; 49: 687–707.
31.
FrishfeldsLundströmTS. Influence from flow-induced deformations of fabrics on bubbles formation and transport during liquid moulding processes. Mech Compos Mater2011; 47(2): 221–232.
32.
JourakAFrishfeldsVLundströmTSHerrmannIHedströmA. The calculations of dispersion coefficients inside two-dimensional randomly packed beds of circular particles. AIChE J2013; 59(3): 1002–1011.
