This paper discusses a simplified approach to analyse the mechanical properties of randomly distributed particulate composites. Mechanical properties of glass powder–filled vinyl ester resins were experimentally investigated. The analytical results were compared with experimental results and a very good correlation was found. Further, the experimental results and the predictions showed that the strength of the composites is less than the strength of the matrix material, for all three composites tested.
TavmanLH. Thermal and mechanical properties of aluminium powder-filled high-density polymer composites. J Appl Polym Sci1996; 62: 2161–2167.
2.
FuSFengXLaukeB. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Compos B2008; 39: 933–961.
3.
SauerJARichardsonGC. Fatigue of polymers. Int J Fract1980; 6(16): 499–532.
4.
EpaarachchiJKuHGohelK. A simplified empirical model for prediction of mechanical properties of random short fiber/vinylester composites. J Compos Mater2010; 44(6): 779–788.
5.
MartinMHanagudSThadhaniNN. Mechanical behaviour of nickel + aluminium powder-reinforced epoxy composites. Mater Sci Eng A2007; 443: 209–218.
6.
Australian Standard 1145.2. Determination of tensile properties of plastic materials – Test conditions for moulding and extrusion plastics, 2001.
7.
NicolaisLNarkisM. Stress–strain behaviour of styrene–acrylonitrile bead composites in the glassy region. Polym Eng Sci1971; 11(3): 194–203.
8.
Al-HajjajTahseenASakiA. Improving the design stresses of high density polyethylene pipes and vessels used in reverse osmosis desalination plants. J Saudi Chem Soc2010; 14: 251–256.
EpaarachchiJayanthaAReushleMatthewT. Performance of aluminium/vinylester particulate composite, PRICM7: 7th Pacific Rim International Conference on Advanced Materials and Processing. 2-6 Aug 2010. Cairns, Australia, 2010, 2010.
11.
RayDBhattacharyaDMohantyAK. Static and dynamic mechanical properties of vinylester resin matrix composites filled with fly ash. J Appl Polym Sci2006; 291: 784–792.
12.
IshaiOCohenoLJ. Effect of fillers and voids on compressive yield of epoxy composites. J Compos Mater1968; 2: 302–315.
13.
HsiehCLTuanWHWuTT. Elastic behaviour of a model two-phase material. J Eur Ceramic Soc2004; 24: 3789–3793.
