An evolvement of surface physicochemical structure in the process of electrochemical oxidation and sizing treatment was monitored by scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. An effect of this evolvement on the properties of carbon fiber/epoxy composites was also researched. The results showed that the root mean square roughness increased from 4.6 nm for untreated fibers to 9.1 nm for surface-treated fibers, and the root mean square value of sized fibers decreased to 8.5 nm. The relative contents of oxygen and nitrogen atomic on carbon fiber surface increased obviously after electrochemical oxidation. Oxygen atomic concentration took a further improvement after sizing treatment and only hydroxyl functional group was found on its surface. The interfacial strength between carbon fiber and the resin matrix improved after surface electrochemical oxidation and sizing, and the mechanical interlock was considered to be the governing factor in fiber/resin adhesion of carbon fiber/epoxy composites.
MahyJJenneskensLWGrabandtO. The relation between carbon-fiber surface treatment and the fiber surface microstructure. Sur Interface Anal1994; 21: 1–13.
2.
JonesC. Effects of electrochemical and plasma treatments on carbon fiber surfaces. Surf Interface Anal1993; 20: 357–367.
DilsizNWightmanJP. Effect of acid-base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion. Colloids Surf A2000; 164: 325–336.
5.
OyamaHTWightmanJP. Surface characterization of PVP-sized and oxygen plasma-treated carbon fibers. Surf Interface Anal1998; 26: 39–55.
6.
SongWGuAJLiangG. Effect of the surface roughness on interfacial properties of carbon fibers reinforced epoxy resin composites. Appl Surf Sci2011; 257: 4069–4074.
7.
TikhomirovASSorokinaNEAvdeevVV. Surface modification of carbon fibers with nitric acid solutions. Inorg Mater2011; 47: 609–613.
8.
PamulaERouxhetPG. Bulk and surface chemical functionalities of type III PAN-based carbon fibers. Carbon2003; 41: 1905–1915.
9.
WanYZWangYLLiQY. Influence of surface treatment of carbon fibers on interfacial adhesion strength and mechanical properties of PLA-based composites. J Appl Polym Sci2001; 80: 367–376.
10.
LiJ. The effect of surface modification with nitric acid on the mechanical and tribological properties of carbon fiber-reinforced thermoplastic polyimide composite. Surf Interface Anal2009; 41: 759–763.
11.
LiuJTianYChenY. Interfacial and mechanical properties of carbon fibers modified by electrochemical oxidation in NH4HCO3/(NH4)2C2O4·H2O aqueous compound solution. Appl Surf Sci2010; 256: 6199–6204.
12.
LeeJYDrzalLT. Surface characterization and adhesion of carbon fibers to epoxy and polycarbonate. Inter J Adhes Adhes2005; 25: 389–394.
13.
DonnetJBParkSJWangWD. The effect of electrochemical surface treatments of carbon fibers using scanning tunneling microscopy. Polym Adv Technol1994; 5: 395–399.
14.
FukunagaAUedaSNagumoM. Anodic surface oxidation mechanisms of PAN-based and pitch-based carbon fibers. J Mater Sci1999; 34: 2851–2854.
15.
FukunagaAUedaS. Anodic surface oxidation for pitch-based carbon fibers and the interfacial bond strengths in epoxy matrices. Compos Sci Technol2000; 60: 249–254.
16.
GuigonM. Characterization of the interface in a carbon-epoxy composites using transmission electron microscopy. J Mater Sci1992; 27: 4591–4597.
17.
OsbeckSBradleyRHLiuC. Effect of an ultraviolet/ozone treatment on the surface texture and functional groups on polyacrylonitrile carbon fibers. Carbon2011; 49: 4322–4330.
18.
ParedesJIMartinez-AlonsoATasconJMD. Atomic-scale scanning tunneling microscopy study of plasma-oxidized ultrahigh-modulus carbon fiber surfaces. J Colloid Interface Sci2003; 258: 276–282.
19.
SmileyRJDelgassWN. AFM, SEM and XPS characterization of PAN-based carbon fibers etched in oxygen plasmas. J Mater Sci1993; 28: 3601–3611.
20.
ZaitsevBNBaklanovaNIZimaTM. Atomic force microscopy study of surface-modified carbon fibers. Inorg Mater2008; 44: 592–597.
21.
IrohJOYuanW. Surface properties of carbon fibers modified by electrodeposition of polymic acid. Polym1996; 37: 4197–4203.
22.
DilsizNWightmanJP. Surface analysis of unsized and sized carbon fibers. Carbon1999; 37: 1105–1114.
23.
BlackketterDMUpadhyayaD. Evaluation of fiber surface treatment and sizing on the shear and transverse tensile strengths of carbon fiber-reinforced thermoset and thermoplastic matrix composites. Polym Compos1993; 14: 430–436.
24.
BismarckAKumruMESongB. Study on surface and mechanical fiber characteristics and their effect on the adhesion properties to a polycarbonate matrix tuned by anodic carbon fiber oxidation. Composites: Part A1999; 30: 1351–1366.
25.
NaderJWDagherHJLopez-AnidoR. Size effects on the bending strength of fiber-reinforced polymer matrix composites. J Reinf Plast Compos2011; 30: 309–317.
26.
PaivaMCBernardoCANardinM. Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibers. Carbon2000; 38: 1323–1337.
27.
TangLGKardosJL. A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix. Polym Compos1997; 18: 100–113.
28.
KrekelGHuttingerKJHoffmanWP. The relevance of surface chemistry of carbon fiber in their adhesion to high temperature thermoplastic. Part II. Surface chemistry. J Mater Sci1994; 29: 3461–3468.
29.
DhakateSRBahlOP. Effect of carbon fiber surface functional groups on the mechanical properties of carbon-carbon composites with HTT. Carbon2003; 41: 1193–1203.
