Multiplexed FBG and etched fiber sensors for process and health monitoring of 2-&3-D RTM components

Abstract

This paper presents research being conducted on the use of a combination of fiber optic sensors for process and health monitoring of resin transfer molded (RTM) composite structures. A laboratory scale RTM apparatus has been designed and built with the capability of visually monitoring the resin filling process and embedding fiber optic sensors into the composite. Fiber Bragg gratings (FBG) and etched fiber sensors (EFS) have been multiplexed and embedded in quasi-2-D panels and 3-D hollow semicircular structures using a novel ingress/egress technique for the purpose of both process and structural health monitoring. The objective of this work is to demonstrate the simultaneous usage of FBGs and etched fiber sensors on a single optical fiber for resin flow monitoring and strain monitoring throughout the life of the composite. Three specimens are presented: one quasi-2D panel with two FBGs and three etched fiber sensors, one semicircular tube with two etched fiber sensors and one semicircular tube with two FBGs. Etched fiber sensors have been correlated with visual inspection to detect the presence of resin. Specimens with embedded FBG sensors have been tested in a tensile test machine to characterize the FBGs for strain monitoring.

Keywords

process monitoring structural health monitoring FBG RTM fiber optic sensors smart materials mechanical testing

Get full access to this article

View all access options for this article.

References

Marks P. Aviation - the shape of wings to come. New Scientist, June 2005. http://www.newscientist.com/article/dn7552 (accessed 7 December 2009).

Hawk J. The Boeing 787 dreamliner: more than an airplane. In: Presentation to AIAA/AAAF Aircraft Noise and Emissions Reduction Symposium , American Institute of Aeronautics and Astronautics and Association Aéronautique et Astronautique de France, May 2005.

Graf NA Evaluation of automated RTM process and materials for naval aircraft. International SAMPE technical conference, Vol. 33, 2001, pp. 1133-1147.

Schwartz MM Composite materials, volume II: Processing, fabrication and applications. Upper Saddle River. New Jersey: Prentice Hall PTR, 1997.

Udd E. Fiber optic smart structures. New York: John Wiley & Sons, Inc., 1995.

Worden K. , et al. The fundamental axioms of structural health monitoring. Proc Math Phys Eng Sci 2007; 463: 1639-1664.

Ahn SH , Lee WI and Springer GS Measurement of the three-dimensional premeability of fiber preforms using embedded fiber optic sensors. J Compos Mater 1995; 29(6).

Kang HK , Park JW , Ryu CY , Hong CS and Kim CG Development of fibre optic ingress/egress methods for smart composite structures . Smart Mater Struct 2000; 9: 149-156.

Green AK , Darvish S. and Shafir E. Practical terminations for optical fibers embedded in composite materials . Proc Soc Photo Opt Instrum Eng 1996; V: 2779.

10.

Kosaka T. , Osaka K. , Nakakita S. and Fukuda T. Fiber optic strain monitoring of textile GFRP during RTM molding and fatigue teste by using embedded FBG sensors. ProcSPIE 2003; V: 5056.

11.

Dennison CR and Wild PM Enhanced Sensitivity of an in-fiber Bragg grating pressure sensor achieved through fiber diameter reduction. Meas Sci Technol 2008; 19.

12.

Hill KO Photosensitivity in optical fiber waveguides: Application to reflection fiber fabrication. Appl Phys Lett 1978; 32: 647.

13.

Novo C. , et al. Progression monitoring of the flow front in RTM process using fibre Bragg grating sensors. Proc Soc Photo Opt Instrum Eng 2000; V: 4185.

14.

Dweynter-Marty V. , et al. Embedded fiber bragg grating sensors for industrial composite cure monitoring. J Intell Mater Syst Struct 1998; 9.

15.

Murukeshan VM , Chan PY , Ong LS and Seah LK Cure monitoring of smart composites using fiber Bragg grating based embedded sensors. Sens Actuators A Phys 2000; 79: 153-161.

16.

Jung K. and Kang TJ Cure monitoring and internal strain measurement of 3-D hybrid braided composites using fiber Bragg grating sensor. J Compos Mater 2007; 41(12).

17.

Leng J. and Asundi A. Structural health monitoring of smart composite materials by using EFPI and FBG sensors. Sens Actuators A Phys 2003; 103: 330-340.

18.

Sundaram R. , Kamath GM , Gupta N. and Rao MS Structural health monitoring of co-cured composite structures using FBG sensors. Proc Soc Photo Opt Instrum Eng 2005; 5764.

19.

Guo ZS Strain and temperature monitoring of asymmetric composite laminate using FBG sensors. Struct Health Monitor 2007; 6(3).

20.

Othonos A. and Kalli K. Fiber Bragg gratings, fundamental and applications in telecommunications and sensing. Boston, Massachusetts: Artech House Inc., 1999.

21.

Lim ST and Lee WI An analysis of the three-dimensional resin transfer mold filling process. Compos Sci Technol 2000; 60: 961-975.

22.

Hect J. Understanding fiber optics. Upper Saddle River. New Jersey: Pearson Education, Inc., 2006.

23.

Novo C. , Frazao O. , Costa AN , Vieira A. , Correia N. , Dias I. , et al. Progression monitoring of the flow front in RTM process using fibre Bragg grating sensors. Proc SPIE 2000; 4185.

24.

Eum S. , Kageyama K. , Murayama H. , Ohsawa I. , Uzawa K. , Kanai M. , et al. Resin flow monitoring in vacuum-assisted resin transfer molding using optical fiber distributed sensor. Proc SPIE 2007; 6526.

25.

Eum S. , Kageyama K. , Murayama H. , Uzawa K. , Ohsawa I. , Kanai M. , et al. Process/health monitoring for wind turbine blade by using FBG sensors with multiplexing techniques. Proc SPIE 2008; 7004.

26.

Fan Y. and Kahrizi M. Characterization of a FBG strain gage array embedded in composite structure . Sensors Actuat A 2005; 121: 297-305.

27.

Wheeler AJ and Ganji AR Introduction to engineering experimentation, 2nd ed. Upper Saddle River: Pearson Education, Inc., 2004.