A series of HTPDMS-toughened castor oil-based PU/EP-graft IPN composites loaded with multi-walled CNTs were prepared. The damping properties, thermal stability, tensile and impact strengths, as well as fractured surfaces of the modified IPN composites were studied systematically. Results revealed that the addition of CNTs can significantly improve the damping capacity especially when the CNTs content was 0.5%, though the thermal decomposition temperature decreased slightly. The tensile strength increased by more than 40% when the CNT contents were 0.3% and 0.5%. When the CNTs content was 0.1%, the impact strength was also improved. It is expected that the modified composites may be used as structural damping materials.
Kireitseu M. , Hui D. and Tomlinson G.Advanced shock-resistant and vibration damping of nanoparticle-reinforced composite material. Composites Part B2008; 39: 128-138.
2.
Song M., Hourston DJ and Schafer FUCorrelation between mechanical damping and interphase content in interpenetrating polymer networks. J Appl Polym Sci2001; 8: 2439-2442.
3.
Cristea M., Ibanescu S., Cascaval CN and Rosu D.Dynamic mechanical analysis of polyurethane-epoxy interpenetrating polymer networks. High Perform Polym2009; 2: 608-623.
4.
Babkina NV, Lipatov YS and Alekseeva TTDamping properties of composites based on interpenetrating polymer networks formed in the presence of compatibilizing additives. Mech Compos Mater2006; 42: 385-392.
5.
Frisch HL, Frisch KC and Klempner D.Glass transitions of topologically interpenetrating polymer networks. Polym Eng Sci1974; 14: 646-650.
6.
Bakar M., Duk R., Przybylek M. and Kostrzewa M.Mechanical and thermal properties of epoxy resin modified with polyurethane . J Reinf Plast Compos2009; 28: 2107-2118.
7.
Raymond MP and Bui VTEpoxy/castor oil graft interpenetrating polymer networks. J Appl Polym Sci1998; 70: 1649-1659.
8.
Rama SR and Rai SKStudies on physicomechanical properties of fly ash-filled hydroxyl-terminated polyurethane-toughened epoxy composites. J Reinf Plast Compos2010; 29: 2099-2104.
9.
Rama SR and Rai SKTensile, flexural, density and void content studies on granite powder filled hydroxyl terminated polyurethane toughened epoxy composite. J Reinf Plast Compos2008; 27: 1663-1671.
10.
Jia QM, Zheng MS, Shen RJ and Chen HXSynthesis, characterization and properties of organoclay-modified polyurethane/epoxy interpenetrating polymer network nanocomposites. Polym Int2006; 55: 257-264.
11.
Wang T., Chen S., Wang Q. and Pei X.Damping analysis of polyurethane/epoxy graft interpenetrating polymer network composites filled with short carbon fiber and micro hollow glass bead. Mater Des2010; 31: 3810-3815.
12.
Lin SP, Han JL, Yeh JT, Chang FC and Hsieh KHComposites of UHMWPE fiber reinforced PU/epoxy grafted interpenetrating polymer networks. Eur Polym J2007; 43: 996-1008.
13.
Chiou WC, Yang DY, Han JL and Lee SNSynthesis and characterization of composites of polyaniline and polyurethane-modified epoxy. Polym Int2006; 55: 1222-1229.
14.
Chen S., Wang Q. and Wang T.Dynamic mechanical properties of polysiloxane modified castor oil-based polyurethane/epoxy interpenetrating polymer network composites. High Perform Polym2011; doi:10.1177/ 0954008311405869.
15.
Hubert P., Ashrafi B., Adhikari K., Meredith J., Vengallatore S., Guan JW, et al. Synthesis and characterization of carbon nanotube-reinforced epoxy: Correlation between viscosity and elastic modulus. Compos Sci Technol2009; 69: 2274-2280.
16.
Tarawneh MA , Ahmad SH, Yahya SY, Rasid R. and Eh Noum YEMechanical properties of thermoplastic natural rubber reinforced with multi-walled carbon nanotubes . J Reinf Plast Compos2011; 30: 363-368.
17.
Lee JH, Rhee KY and Park SJEffects of silane modification and temperature on tensile and fractural behaviors of carbon nanotube/epoxy nanocomposites. J Nanosci Nanotechnol2011; 11: 275-280.
18.
Urayama K., Miki T., Takigawa T. and Kobjiya S.Damping elastomer based on model irregular networks of end-linked poly dimethylsiloxane . Chem Mater2004; 16: 173-178.
19.
Hu R., Dimonie VL, El-Aasser MS, Pearson RA, Hiltner A., Mylonakis SG, et al. Multicomponent latex IPN materials 2. Damping and mechanical behavior. J Polym Sci, Part B: Polym Phys1997; 35: 1501-1514.
20.
Guo M.Dynamic mechanical thermal analysis of polymer composites. Beijing: Chemical Industry Press, 2002, pp.18-74.
21.
Wensel J., Wright B., Thomas D., Douglas W., Mannhalter B., Cross W., et al. Enhanced thermal conductivity by aggregation in heat transfer nanofluids containing metal oxide nanoparticles and carbon nanotubes. Appl Phys Lett2008; 92: 1-3. (023110).
