This study gives the comparative analysis of polypropylene (PP)/oil palm flour (OPF) and PP/oil palm clinker (OPC) composites using maleated polypropylene (MAPP) as a coupling agent. Ground flour and crashed OPC were compounded separately into polypropylene with and without MAPP using a twin-screw compounder. The incorporated OPF and OPC in the composites were up to 40 wt%. The compounded samples were prepared into test specimens by injection molder. The composites were characterized by tensile strength, tensile modulus, flexural strength, flexural modulus, impact strength, and melt flow index. The surface morphology of composites was evaluated by scanning electron microscope. Incorporation of coupling agent showed better result than that of without coupling agent. Various properties of composites incorporated with OPC represented considerably close to the composites with OPF.
Pukanszky B.Particulate filled polypropylene composites . In: Karger-Kocsis J (ed.) Polypropylene: An A-Z reference. Dordrecht: Kluwer Academic Publishers, 1999, pp.574-580.
2.
Savadori A., Scapin M. and Walter R.Particle filled polyolefins with high stiffness and toughness as used for load bearing components. Macromol Symp1996 ; 108: 183-202.
3.
Mikhail RSh , Abd-El-Khalik M., Hassanein A., Dollimore D. and Stino R.Mechanical properties in relation to the microstructure of fibre reinforced portland clinker pastes . Cem Concr Res1978; 8(6): 765-773.
4.
Singh NB and Sarita Rai.Effect of polyvinyl alcohol on the hydration of cement with rice husk ash . Cem Concr Res2001; 31(2): 239-243.
5.
Flávio de Andrade Silva, Deju Zhu , Barzin Mobasher, Chote Soranakom and Romildo Dias Toledo Filho.High speed tensile behavior of sisal fiber cement composites. Mater Sci Eng A2010; 527(3): 544-552.
6.
Fowler DWPolymer modified concrete. Int J Cem Compos Lightweight Concr1988; 10(4): 267.
7.
Garcia Santos A., Rincón JMa, Romero M. and Talero R.Characterization of a polypropylene fibered cement composite using ESEM, FESEM and mechanical testing. Constr Build Mater2005; 19(5): 396-403.
8.
MacVicar R., Matuana LM and Balatinecz JJAging mechanisms in cellulose fiber reinforced cement composites. Cem Concr Compos1999; 21(3): 189-196.
9.
Masaki Hasegawa , Tadashi Kobayashi and Dinilprem Pushpalal GKA new class of high strength, water and heat resistant polymer - cement composite solidified by an essentially anhydrous phenol resin precursor. Cem Concr Res1995; 25(6): 1191-1198.
10.
Bilba K. and Arsene M-A.Silane treatment of bagasse fiber for reinforcement of cementitious composites . Composites Part A2008; 39(9): 1488-1495.
11.
Shigeyuki Akihama , Tatsuo Suenaga and Tadashi Banno.Mechanical properties of carbon fibre reinforced cement composites. Int J Cem Compos Lightweight Concr1986; 8(1): 21-38.
12.
Savastano Jr H., Santos SF, Radonjic M. and Soboyejo WOFracture and fatigue of natural fiber-reinforced cementitious composites. Cem Concr Compos2009; 31(4): 232-243.
13.
Nutt WOAn evaluation of a polymer cement composite. Composites1970; 1(4): 234-238.
14.
Godara A., Raabe D., Bergmann I., Putz R. and Muller U.Influence of additive on the global mechanical and the microscopic strain localization in wood reinforced polypropylene composite during tensile deformation investigated using digital image correlation. Compos Sci Technol2009; 69: 139-146.
15.
Sanadi AR, Caulfield DF, Stark NM and Clemons CCThermal and mechanical analysis of ligno cellulosic-polypropylene composites . In: The Fifth International Conference on Woodfiber-Plastic Composites, Madison, WI, USA, 1994.
16.
Sanadi AR, Caulfield DF and Jacobson REAgro-fiber thermoplastic composites (Chapter 12). In: Rowell RM, Young RA and Rowell JK (eds) Paper and composites from agro-based resources. New York : CRC Lewis Publishers, 1997, pp.378-399.
17.
Bledzi K., Reihmane S. and Gassan J.Thermoplastics reinforced with wood filler: a literature review. Polym Plast Technol Eng1998; 37: 451-468.
18.
Rozman HD, Lim PP, Abusamah A., Kumar RN, Ismail H. and Mohd Ishak ZAThe physical properties of oil palm empty fruit bunch (EFB) composite made from various thermoplastics. Int J Polym Mater1999; 44: 179-195.
19.
Joseph PV, Joseph K. and Thomas S.Effect of processing variables on the mechanical properties of sisal fiber reinforced polypropylene composites. Compos Sci Technol1999; 59: 1625-1640.
20.
Nabi Saheb D. and Jog JPNatural fiber polymer composites: a review . Adv Polym Technol1999; 18: 351-363.
21.
Hill CAS and Abdul Khalid HPS.Effect of fiber treatments on mechanical properties of coir or oil palm fiber reinforced polyester composites. J Appl Polym Sci2000; 78: 1685-1697.
22.
Rozman HD, Tay GS, Abubakar A. and Kumar RNTensile properties of oil palm empty fruit bunch-polyurethane composites . Eur Polym J2001; 37: 1759-1765.
23.
Felix JM and Gatenholm P.The nature of adhesion in composites of modified cellulose fibers and polypropylene . J Appl Polym Sci1991 ; 42: 609-620.
24.
Luo S. and Netravali ANInterfacial and mechanical properties of environment-friendly green composites made from pineapple fibers and poly (hydroxybutyrate-co-valerate) resin. J Mater Sci1999; 34: 3709-3719.
25.
Takase S. and Shiraishi N.Studies on composites from wood and polypropylenes. II. J Appl Polym Sci1989; 37: 645-659.
26.
Girones J., Pimenta MTB, Vilaseca F., Carvalho AJF, Mutje P. and Curvelo AASBlocked diisocyanates as reactive coupling agents: application to pine fiber-polypropylene composites. Carbohydr Polym2008; 74: 106-113.
27.
Pracella M. , Chionna D., Anguillesi I., Kullinski Z. and Piorkowska E.Functionalization, compatiblization and properties of polypropylene composite with hemp fibres . Compos Sci Technol2006; 66: 2218-2230.
28.
Khalid M., Ratnam CT, Chuah TG, Ali Salmiaton and Choong TSY.Comparative study of polypropylene composites reinforced with oil palm empty fruit bunch fiber and oil palm derived cellulose. Mater Des2008; 29: 173-178.
29.
Ratnam CT, Raju G. and Wan Yunus WMZ.Oil palm empty fruit bunch (OPEFB) fiber reinforced PVC/ENR blend-electron beam irradiation. Nucl Instrum Methods Phys Res B2007; 265: 510-514.
30.
Rozman HD, Saad MJ and Mohd Ishak ZAFlexural and impact properties of oil palm fruit bunch (EFB)-polypropylene composites - the effect of maleic anhydride chemical modification of EFB. Polym Test2003; 22: 335-341.
31.
Rozman HD, Ismail H., Jaffri RM, Aminullah AA and Mohd Ishak ZAMechanical properties of polyethylene-oil palm empty fruit bunch composites . Polym Plast Technol Eng1998; 37: 495-507.
32.
Coutinho FMB and Costa THS.Performance of polypropylene-wood fiber composites . Polym Test1999; 18: 581-587.
33.
Zaini MJ, Ismail Z., Fuad MYA and Mustafah J.The effect of filler content and the size on the mechanical properties of polypropylene/oil palm wood fibre composite. Polym Int1995; 40: 51-56.
34.
Maldas D. and Kokta BVInterfacial adhesion of lignocellulosic materials in polymer composites: an overview. Compos Interf1993; 1: 87-108.
35.
Jiken L., Malhammar G. and Selden R.The effect of mineral fillers on impact and tensile properties of polypropylene . Polym Test1991; 10: 329-344.
Rowell RM, Tillman AM and Simonson RJA simplified procedure for the acetylation of hardwood and softwood flakes for flakeboard production. J Wood Chem Technol1986; 6: 427-448.
38.
Tajvidi M. and Ebrahimi G.Water uptake and mechanical characteristics of natural filler-polypropylene composites. J Appl Polym Sci2003; 88: 941-946.
39.
Van de Weyenberg I., Ivens J., Coster A., Kino De B., Baetens E. and Verpoest I.Influence of processing and chemical treatment of flax fibres on their composites. Compos Sci Technol2003; 63(9): 1241-1246.
40.
Lu JZ, Wu Q. and Harold SMChemical coupling in wood fibre and polymer composites: a review of coupling agents and treatments. Wood Fibre Sci2000 ; 32(1): 88-104.
41.
Lu JZ, Wu Q. and Negulescu IIWood-fiber/highdensity-polyethylene composites: coupling agent performance . J Appl Polym Sci2005; 96: 93-102.
42.
Nachtigall SMB, Cerveira GS and Rosa SML.New polymeric-coupling agent for polypropylene/wood-fibre composites. Polym Test2007; 26(5): 619-628.
43.
Bledzki AK, Faruk O. and Huque M.Physico-mechanical studies of wood fiber reinforced composites. Polym Plast Technol Eng2002; 41(3): 435-451.
44.
Kazayawoko M., Balatinecz JJ and Matuana LMSurface modification and adhesion mechanism in woodfiber-polypropylene composites. J Mater Sci1999; 34(24): 6189-6199.
45.
Sombatsompop N., Yotinwattanakumtorn C. and Thongpin C.Influence of type and concentration of maleic anhydride grafted polypropylene and impact modifiers on mechanical properties of PP/wood sawdust composites. J Appl Polym Sci2005; 97(2): 475-484.
46.
Li Q. and Matuana LMEffectiveness of maleated and acrylic acid-functionalized polyolefin coupling agents for HDPE-wood-fibre composites. J Thermoplast Compos Mater2003; 16: 551-564.
