Investigation on Physio-chemical and Mechanical Properties of Raw and Alkali-treated Agave americana Fiber

Abstract

This paper aims at introducing new natural fibers for use as fillers in a polymeric matrix enabling production of cost-effective, biodegradable, and lightweight composites for load carrying structures. Agave (Agave americana) leaf fiber, one such kind, is rich in cellulose, relatively inexpensive, and abundantly available. In this study, investigations on extraction of agave leaf fiber are carried out and its physical, chemical, and mechanical properties such as the cross section, length distribution, weight distribution, density, cellulose, hemicellose, lignin, and wax are determined experimentally. Analysis of the tensile force of the fiber, elongation of the fiber, and water absorption of the fiber in load direction and fiber length are also carried out. The effect of alkali treatment on the fiber at varying concentrations, temperature, and holding time are also studied. A scanning electron microscope is used to analyze the morphology of raw and treated fibers.

Keywords

natural fibers mechanical properties chemical properties alkali treatment SEM.

Get full access to this article

View all access options for this article.

References

Murali Mohan Rao, K. and Mohana Rao, K. (2007). Extraction and Tensile Properties of Natural Fibers: Vakka, Date and Bamboo, Composite Structure, 77(1): 288-295.

Sgriccia, N. , Hawley, M.C. and Misra, M. (2008). Characterization of Natural Fiber Surfaces and Natural Fiber Composites, Composites. Part A: Applied Science and Manufacturing, 39(10): 1632-1637.

Gassan, J. and Bledzki, A.K. ( 1999). Possibilities for Improving the Mechanical Properties of Jute/Epoxy Composites by Alkali Treatment of Fibers, Composite Science and Technology, 59(9): 1303-1309.

Mwaikanbo, L.Y. and Ansell, M.P. (2006). Mechanical Properties of Alkali Treated Plant Fibers and their Potential as Reinforcement Materials . I. Hemp Fibers, Journal of Materials Science, 41(8): 2483-2496.

Mohd Edeerozey, A.M. , Hazizan Md Akil. , Azhar, A.B. and Zainal Ariffin , M.I. (2007). Chemical Modification of Kenaf Fibers, Materials Letters, 61(10): 2023-2025.

Nishino, T. , Hirao, K. , Kotera, M. , Nakamae, K. and Inagaki, H. ( 2003). Kenaf Reinforced Biodegradable Composite, Composite Science and Technology, 63(9): 1281-1286.

Herrera Franco, P.J. and Valadez Gonzalez , A. (2005). A Study of the Mechanical Properties of Short Natural Fiber Reinforced Composites, Composites. Part B: Engineering, 36(8): 597-608.

Ismail, H. , Shuhelmy, S. and Edyham, M.R. ( 2002). The Effects of Silane Coupling Agent on Curing Characteristics and Mechanical Properties of Bamboo Fiber Filled Natural Rubber Composites , European Polymer Journal, 38(1): 39-47.

Geethamma, V.G. , Thomas Mathew, K. , Lakshminarayanan , R. and Thomas, S. (1998). Composite of Short Coir Fibers and Natural Rubber: Effect of Chemical Modification , Loading and Orientation of Fiber, Polymer, 39(6-7): 1483-1491.

10.

Juarez, C. , Duran, A. , Valdez, P. and Fajardo, G. ( 2007). Performance of ‘‘Agave lecheguilla’’ Natural Fiber in Portland Cement Composites Exposed to Severe Environment Condition, Building and Environment, 42(3): 1151-1157.

11.

Sgriccia, N. and Hawley, M.C. ( 2007). Thermal, Morphological and Electrical Characterization of Microwave Processed Natural Fiber Composite, Composite Science and Technology, 67(9): 1986-1991.

12.

Goda, K. , Sreekala, M.S. , Gomes, A. , Kaji, T. and Ohgi, J. ( 2006). Improvement of Plant Based Natural Fibers For Toughening Green Composites: Effect of Load Application During Mercerization of Ramie Fibers, Composites. Part A: Applied Science and Manufacturing , 37(12): 2213-2220.

13.

de Andrade Silva, F. , Chawla, N. and de Toledo Filho , R.D. (2008). Tensile Behavior of High Performance Natural (Sisal) Fibers, Composite Science and Technology, 68(15-16): 3438-3443.

14.

Mathur, V.K. (2006). Composite Materials from Local Resources, Construction and Building Materials, 20(7): 470-477.

15.

Pietak, A. , Korte, S. , Tan, E. , Downard, A. and Staiger, M.P. ( 2007). Atomic Force Microscopy Characterization of the Surface Wettability of Natural Fibers, Applied Surface Science, 253(7): 3627-3635.

16.

Bisanda, E.T.N. (2000). The Effect of Alkali Treatment on the Adhesion Characteristics of Sisal Fibers, Applied Composite Materials, 7(5-6): 331-339.

17.

Bessadok, A. , Marasis, S. , Gounave, F. , Colasse, L. , Zimmerlin, I. , Roudesli, S. et al. (2007). Effect of Chemical Treatments of Alfa (Stipa tenacissima) Fibers on Water Sorption Properties , Composite Science and Technology, 67(3-4): 685-697.

18.

Dill-Langer, G. , Cruz Hidalgo, R. , Kun, F. , Moreno, Y. , Aicher, S. and Herrmann, H.J. (2003). Size Dependency of Tension Strength in Natural Fiber Composites, Physica A: Statistical Mechanics and its Applications, 325(3-4): 547-560.

19.

Van de Weyenberg, I. , Chi Truong, T. , Vangrimde, B. and Verpoest, I. (2006). Improving the Property of UD Flax Fiber Reinforced Composite by Applying an Alkali Fiber Treatment, Composites. Part A: Applied Science and Manufacturing, 37(9): 1368-1376.