The effects of kenaf core loading and maleated polyethylene (MAPE) as a compatibilizer on processing torque, mechanical properties, and water absorption were studied. HDPE/soya powder/kenaf core composites were prepared by incorporation of kenaf core powder at different loadings into HDPE/soya powder matrix with an internal mixer (Haake PolyLab) at 180°C and 50 rpm rotor speed. A compatibilizer, i.e., MAPE, was used to improve the matrix-filler interaction and the mechanical properties of the composites. The results indicated that tensile strength and elongation at break decreased with increasing filler loading, whereas stabilization torque, tensile modulus, flexural strength, flexural modulus, and water absorption exhibited an increasing trend. The presence of MAPE also enhanced the tensile and flexural properties of the composites.
Tajvidi, M., Falk, R.H. and Hermanson, J.C. ( 2006). Effect of Natural Fibers on Thermal and Mechanical Properties of Natural Fiber Polypropylene Composites Studied by Dynamic Mechanical Analysis , Journal of Applied Polymer Science, 101(6): 4341-4349.
2.
Mat Taib, R. , Ramarad, S., Mohd Ishak, Z.A. and Rozman, H.D. (2009). Effect of Immersion Time in Water on the Tensile Properties of Acetylated Steam-exploded Acacia Mangium Fibers-filled Polyethylene Composites, Journal of Thermoplastic Composite Materials, 22(1): 83-98.
3.
Shibata, S., Cao, Y. and Fukumoto, I. ( 2006). Study of the Flexural Modulus of Natural Fiber/ Polypropylene Composites by Injection Molding, Journal of Applied Polymer Science, 100(2): 911-917.
4.
Najafi, S.K. , Tajvidi, M. and Chaharmahli , M. (2006). Long-term Water Uptake Behavior of Lignocellulosic-high Density Polyethylene Composites, Journal of Applied Polymer Science, 102(4): 3907-3911.
5.
Panthapulakkal, S. and Sain, M. (2007). Injection-molded Short Hemp Fiber/Glass Fiber-reinforced Polypropylene Hybrid Composites - Mechanical , Water Absorption and Thermal Properties, Journal of Applied Polymer Science, 103(4): 2432-2441.
6.
Edeerozey, A.M.M. , Akil, H.M., Azhar, A.B. and Ariffin, M.I.Z. (2007). Chemical Modification of Kenaf Fibers, Materials Letters, 61(10): 2023-2025.
7.
Habibi, Y.A. , El-Zawawy, W.K.B., Ibrahim, M.M.B. and Dufresne , A.A. (2008). Processing and Characterization of Reinforced Polyethylene Composites Made with Lignocellulosic Fibers from Egyptian Agro-industrial Residues, Composites Science and Technology, 68(7-8): 1877-1885.
8.
Zampaloni, M. , Pourboghrat, F., Yankovich, S.A., Rodgers, B.N., Moore, J., Drzal, L.T., Mohanty, A.K. and Misra, M. (2007). Kenaf Natural Fiber Reinforced Polypropylene Composites: A Discussion on Manufacturing Problems and Solutions , Composites Part A: Applied Science and Manufacturing, 38(6): 1569-1580.
9.
Ochi, S. ( 2008). Mechanical Properties of Kenaf Fibers and Kenaf/PLA Composites , Mechanics of Materials, 40(4-5): 446-452.
10.
Sgriccia, N. , Hawley, M.C. and Misra, M. (2008). Characterization of Natural Fiber Surfaces and Natural Fiber Composites, Composites Part A: Applied Science and Manufacturing, 39(10): 1632-1637.
11.
Nishino, T. , Hirao, K., Kotera, M., Nakamae, K. and Inagaki, H. (2003). Kenaf Reinforced Biodegradable Composite, Composites Science and Technology, 63(9): 1281-1286.
12.
Ismail, H. and Haw, F.S. ( 2008). Effects of Palm Ash Loading and Maleated Natural Rubber as a Coupling Agent on the Properties of Palm-ash-filled Natural Rubber Composites , Journal of Applied Polymer Science, 110(5): 2867-2876.
13.
Vilay, V., Mariatti, M., Mat Taib, R. and Todo, M. ( 2008). Effect of Fiber Surface Treatment and Fiber Loading on the Properties of Bagasse Fiber-reinforced Unsaturated Polyester Composites , Composites Science and Technology, 68(3-4): 631-638.
14.
Salmah, H., Ismail, H. and Bakar, A.A. ( 2008). The Effects of Dynamic Vulcanization and Compatibilizer on Properties of Paper Sludge-filled Polypropylene/Ethylene Propylene Diene Terpolymer Composites, Journal of Applied Polymer Science , 107(4): 2266-2273.
15.
Doan, T.-T.-L., Gao, S.-L. and Mäder, E. ( 2006). Jute/Polypropylene Composites I. Effect of Matrix Modification , Composites Science and Technology, 66(7-8): 952-963.
16.
Mohanty, S., Verma, S.K. and Nayak, S.K. ( 2006). Dynamic Mechanical and Thermal Properties of MAPE Treated Jute/HDPE Composites, Composites Science and Technology, 66(3-4): 538-547.
17.
Han, G., Lei, Y., Wu, Q., Kojima, Y. and Suzuki, S. ( 2008). Bamboo-fiber Filled High Density Polyethylene Composites: Effect of Coupling Treatment and Nanoclay, Journal of Polymers and the Environment, 16(2): 123-130.
18.
Adhikary, K.B. , Pang, S. and Staiger, M.P. (2008). Long-term Moisture Absorption and Thickness Swelling Behaviour of Recycled Thermoplastics Reinforced with Pinus Radiata Sawdust, Chemical Engineering Journal, 142(2): 190-198.
19.
Arbelaiz, A., Fernández, B., Ramos, J.A., Retegi, A., Llano-Ponte, R. and Mondragon, I. ( 2005). Mechanical Properties of Short Flax Fibre Bundle/Polypropylene Composites: Influence of Matrix/Fibre Modification, Fibre Content, Water Uptake and Recycling, Composites Science and Technology, 65(10): 1582-1592.
20.
La Mantia, F.P., Morreale, M. and Mohd Ishak, Z.A. (2005). Processing and Mechanical Properties of Organic Filler-polypropylene Composites, Journal of Applied Polymer Science, 96(5): 1906-1913.
21.
Singh, S. and Mohanty, A.K. ( 2007). Wood Fiber Reinforced Bacterial Bioplastic Composites: Fabrication and Performance Evaluation, Composites Science and Technology, 67(9): 1753-1763.
22.
Nielson, E.L. (1976). Mechanical Properties of Polymers and Composites, Marcel Dekker, New York.
