Sage Journals: Discover world-class research

Abstract

The date pits flour was used as a filling material in composition with high density polyethylene (HDPE). The blending proportions were: (1) 10% date pits, 90% HDPE; (2) 20% date pits, 80% HDPE; (3) 30% date pits, 70% HDPE; and (4) 40% date pits, 60% HDPE. Thermal conductivities, specific heat, and melt flow index of the blends were determined. The thermal conductivities ranged from 0.460 to 0.720 W/(m°C) and specific heats ranged from 1.10 to 5.30 kJ/(kg°C). The tensile and flexural tests on composite plates, fabricated by compress molding, indicated that strength and strain values decreased with increase in the percentage of date pits. There was no significant difference between flexural moduli of elasticity of the composites, but tensile modulus had the highest value at 30% blend. Moduli of elasticity of the composites were lower than the plates prepared from virgin HDPE at 180°C. It was presumed that high temperature processing of pure HDPE altered its original properties and consequently increased its modulus of elasticity.

Keywords

date pits mechanical properties thermal properties high density polyethylene.

Get full access to this article

View all access options for this article.

References

Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibers, Progress in Polymer Science, 24(2): 221—274.

Bledzki, A.K. , Reihmane, S. and Gassan, J. (1996). Properties and Modification Methods for Vegetable Fibers for Natural Fiber Composites, Journal of Applied Polymer Science, 59(8): 1329—1336.

Schumacher, P.A. (1987). A Novel Processing Aid for Greater Flexibility in Blown Film Extrusion, Jounural of Plastic Film and Sheeting, 3(2): 118—124.

Banat, F. , Al-Asheh, S. and Al-Makhadmeh, A. (2004). Utilization of Raw and Activated Date Pits for the Removal of Phenol from Aqueous Solution, Chemical Engineering Technology, 27(1): 80—86.

Hamada, J.S. , Hashim, I.B. and Sharif, F.A. (2002). Preliminary Analysis and Potential Uses of Date Pits in Foods, Food Chemistry, 76(2): 135—137.

Yousif, O.M. , Osman, M.F. and Alhadrami, G.A. (2004). Evaluation of Dates and Date Pits as Dietary Ingredient in Tilapia Diets Differing in Protein Sources, Food Chemistry , 84: 577—584.

Besbesa, S. , Bleckerb, C. , Deroanneb, C. , Drirac, N. and Attiaa, H. (2004). Date Seeds: Chemical Composition and Characteristic Profiles of the Lipid Fraction, Food Chemistry, 84(1): 577—584.

Ghazanfari, A. , Panigrahi, S. and Tabil, L. (2005). Experiments on Production of Biocomposite Plates from Pistachio Shells, Date Pits and HDPE, CSAE/SCGR Paper No. 05-079 CSAE/ SCGR Secretary, PO Box 316, Mansonville, QC, Canada.

Huang, C. and Pai, J. (1998). Studies on Processing Parameters and Thermal Stability of ENCF/ ABS Composites for EMI Shielding, Journal of Applied Polymer Science, 63(1): 115—123.

10.

Mohanty, A.K. , Misra, M. and Drzal, L.T. (2001). Surface Modification of Natural Fibers and Performance of the Resulting Biocomposites: An overview , Composite Interfaces, 8(5): 313—343.

11.

Hristove, V. and Vasileva, S. (2003). Dynamic Mechanical and Thermal Properties of Modified Polypropylene Wood Fiber Composites, Macromolecular Material and Engineering, 288(10): 798—806.

12.

Kokta, B.V. , Raj, R.G. and Daneault, C. (1989). Use of Wood Flour as Filler in Polypropylene: Studies on Mechanical Properties, Polymer-Plastics Technology and Engineering, 28(3): 247—259.

13.

Oksman, K. and Clemons, C. (1998). Mechanical Properties and Morphology of Impact Modified Polypropylene-wood Flour Composites, Journal of Applied Polymer Science, 67(9): 1503—1513.

14.

Incropera, F.P. and DeWitt, D.P. (1985). Introduction to Heat Transfer, John Wiley & Sons, Inc., New York.

15.

Hooper, F.C. and Lepper, F.R. (1950). Transient Heat Flow Apparatus for the Determination of Thermal Conductivities, Heating, Piping, and Air Conditioning, 22: 129—134.

16.

Fontana, A.J. , Wacker, B. , Campbell, C.S. and Campbell, G.S. (2001). Simulation Thermal Conductivity, Thermal Resistivity, and Thermal Diffusivity Measurement of Selected Foods and Soils, ASAE Paper No. 01-6101, ASAE , St. Joseph, MI.

17.

Iwabuchi, K. , Kimura, T. and Otten, L. (1999). Effect of Volumetric Water Content on Thermal Properties of Dairy Cattle Feces Mixed with Sawdust , Bioresource Technolog, 70(3): 293—297.

18.

Callister Jr, W.D. (2001). Fundamentals of Material Science and Engineering/An Interactive. John Wiley & Sons, Inc., New York.

Thermal and Mechanical Properties of Blends and Composites from HDPE and Date Pits Particles

Abstract

Keywords

Get full access to this article

References