This work reports hygroscopic, thermal, and mechanical properties of biomass composites comprising sisal fiber reinforcing castor oil PU resin. The effects of reinforcement geometry and alkaline treatment of fibers were evaluated. In general, alkaline treatment improved quasi-static tensile properties of composites with short randomly oriented and long aligned sisal fibers, respectively. On the other hand, an adverse effect of alkaline treatment was observed in the mechanical behavior of the composite with bidirectional fabric architecture. The outstanding influence of moisture on thermo-mechanical properties of biomass composites was confirmed through thermogravimetric and differential scanning calorimetry techniques. Dynamical-mechanical thermal analysis showed increased storage modulus (i.e., stiffness) and decreased damping properties of biomass composites as compared to neat PU matrix. Dynamical-mechanical testing also detected unexpected decrease on glass transition temperature of composites in regard to the neat polymer resin; resin plasticization due to moisturized fibers and/or alkaline treatment residues was identified as probably the culprit.
Dahlke, B., Larbig, H., Scherzer, H.D. and Poltrock, R. ( 1998). Natural Fiber Reinforced Foams Based on Renewable Resources for Automotive Interior Applications, Journal of Cellular Plastics, 34: 361-379.
3.
Schuh, T. and Gayer, U. ( 1996). Automotive Applications of Natural Fiber Composites. In: First International Symposium on Lignocellulosics-Plastics Conference Proceedings, São Paulo, Brazil.
4.
Suddell, B.C., Evans, W.J., Isaac, D.H. and Crosky, A. ( 2002). Natural Fibres and their Composites. In: IV International Symposium on Natural Polymers and Composites Conference Proceedings, São Pedro, Brazil.
5.
Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibers, Progress in Polymer Science, 24: 221-274.
6.
Food and Agriculture Organization of the United Nations (FAO). (2003). Agriculture Statistical Databasehttps://www.fao.org.br (access in 06/2003).
7.
Joseph, K. and Thomas, S. ( 1992). Viscoeslastic Properties of Short-sisal-fibre-filled Low-density Polyethylene Composites: Effect of Fibre Length and Orientation , Materials Letters, 15: 224-228.
8.
Gowda, T.M., Naidu, A.C.B. and Chhaya, R. ( 1999). Some Mechanical Properties of Jute Fabric-reinforced Polyester Composites, Composites Part A, 30: 277-284.
9.
Noorunnisa, K.P., Reddy, M.M., Raghu, K., John, K. and Venkata Naidu , S. (2007). Tensile, Flexural and Compressive Properties of Sisal/Silk Hybrid Composites , Journal of Reinforced Plastics and Composites, 26: 1065-1070.
10.
Mohini, S., Morchhale, R.K., Asokan, P. and Prasad, B.K. ( 2008). Plant Fiber - Industrial Waste Reinforced Polymer Composites as a Potential Wood Substitute, Material Journal of Composite Materials, 42: 367-384.
11.
Bessadok, S. , Marais, S., Roudesli, C. and Métayer , M. (2008) Influence of Chemical Modifications on Water-sorption and Mechanical Properties of Agave Fibres, Composites Part A, 39: 29-45.
12.
Chen, C.H. and Ma, C.C.M. ( 1994). Pultruded Fibre Reinforced Polyurethane Composites.III. Static Mechanical, Thermal, and Dynamic Mechanical Properties, Composites Science and Technology, 52: 427-432.
13.
Silvestre Filho, G.D. (2001). Comportamento mecânico do Poliuretano Derivado de óleo de Mamona Reforçado Por Fibra de Carbono, Master thesis, Engineering School of São Carlos, The University of São Paulo, Brazil .
14.
Zhao-Zhu, Z. , Hao-Jie, S., Xue-Hu, M. and Zhuang-Zhu, L. (2008). Effect of Carbon Fibers Surface Treatment on Tribological Performance of Polyurethane (PU) Composite Coating, Wear, 264: 599-605.
15.
Bledzki, A.K. , Zhang, W. and Chate, A. (2001). Natural-fibre-reinforced Polyurethane, Composites Science and Technology, 61(16): 2405-2411.
16.
Mothé, C.G. and Araújo , C.R. (2000). Properties of Polyurethane Elastomers and Composites by Thermal Analysis, Thermochimica Acta, 357/358: 321-325.
17.
Satheesh Kumar, M.N., Manjula, K.S. and Siddaramaiah , K. (2007) Transport Behavior of n-alkane Penetrants into Castor Oil based Polyurethane -Polyester Nonwoven Fabric Composites, Journal of Hazardous Materials, 145(1-2): 36-44.
18.
Chierice, G.O. , Sakamoto, W.K., Shibattakagesawa , S. K., D. H. F., Fernandes, S.H. and Longo, E. ( 1999). Piezoelectric Effect in Composite Polyurethane-ferroeletric Ceramics, Physics Solid State, 172: 265-271.
19.
Ignácio, H., Mazzer, N., Barbieri, C.H. and Gilberto, C. (1997). Uso da Poliuretana Derivada do óleo de Mamona Para Preencher Defeitos Ósseos Diafisários Segmentares do Radio: Estudo Experimental em Coelhos, Revista Brasileira de Ortopedia, 32(10): 815-821.
20.
Claro Neto, S. (1997). Physical Chemistry Characterization of a Polyurethane Derived from Castor Oil Used for Bone Implants. PhD Thesis, Chemistry Institute of São Carlos, University of São Paulo, Brazil.
21.
Mohanty, A.K. , Misra, M. and Hinrichsen, G. (2000) Biofibers Biodegradable Polymers and Biocomposites: An Overview, Macromolecular Materials and Engineering, 276/277(1): 1-24.
22.
American Society for Testing and Materials: Standard Test Method for Tensile Properties of Plastics D638. Philadelphia. (1996). CD-ROM.
23.
American Society for Testing and Materials: Standard Test Method for Tensile Properties of Single Textile Fibres D3822-96. (1996). Philadelphia. CD-ROM.
24.
Rong, M.Z., Zhang, M.Q., Liu, Y., Yang, G.C. and Zeng, H.M. ( 2001). The Effect of Fiber Treatment on the Mechanical Properties of Unidirectional Sisal-reinforced Epoxy Composites, Composites Science and Technology, 61(10): 1437-1447.
25.
Gowda, T.M., Naidu, A.C.B. and Chhaya, R. ( 1999). Some Mechanical Properties of Untreated Jute Fabric-reinforced Polyester Composites, Composites Part A, 30(3): 277-284.
26.
Das, S., Saha, A., Choudhury, P., Basak, R. and Mitra, B. ( 2000). Effect of Steam Pretreatment of Jute Fiber on Dimensional Stability of Jute Composite, Journal of Applied Polymer Science , 76(11): 1652-1661.
27.
Sydenstricker, T.H.D., Mochnaz, S. and Amico, S.C. (2002). Pull-out and Other Evaluations in Sisal-reinforced Polyester Biocomposites, Polymer Testing, 22(4): 375-380.
28.
Liao, K., Schultheisz, C.R., Hunston, D.L. and Liao, K. ( 1999). Effects of Environmental Aging on the Properties of Pultruded GFRP, Composites Part B, 30: 485-493.
29.
Aquino, E.M.F. , Silva, R.V., Sarmento, L.P.S. and Oliveira , W. (2007) Moisture Effect on Degradation of Jute/Glass Hybrid Composites, Journal of Reinforced Plastics and Composites, 26: 219-233.
30.
Razera, N.A.T. and Frollini, E. (2004). Composites based on Jute Fibers and Phenolic Matrices: Properties of Fibers and Composites, Journal of Applied Polymer Science, 91(2): 1077-1085.
31.
Marcovich, N.E., Reboredo, M.M. and Aranguren , M.I. (2001). Modified Woodflour as Thermoset Fillers II. Thermal Degradation of Woodflours and Composites, Thermochimica Acta, 372: 45-47.
32.
Hornsby, P.R. , Hinrichsen, E. and Tarverdi, K. (1997). Preperation and Properties of Polypropylene Composites Reinforced with Wheat and Flax Straw Fibres, Journal of Material Science, 32: 443-449.
33.
Pothan, L.A. , Oommen, Z. and Thomas, S. (2003). Dynamic Mechanical Analysis of Banana Fiber Reinforced Polyester Composites, Composites Science and Technology, 63: 283-293.
34.
Rowell, R.M., Anand, R., Sanadi Caulfield, D.F. and Jacobson, R.E. ( 1997). Utilization of Natural Fibers in Plastic Composites: Problems and Opportunities. In: Leão. A.,Carvalho, F.X.,Frollini, E., (eds), Lignocellulosic - Plastics Composites, pp. 23-51, USP; UNESP, São Paulo.
35.
Murayama, T. ( 1978). Dynamical Mechanical Analysis of Polymeric Material, Elsevier Scientific, Amsterdam.
36.
Dutra, R.C.L. (2000). Hybrid Composites Based on Polypropylene and Carbon Fibre and Epoxy Matrix, Polymer , 41(10): 3841-3849.
37.
Ibarra, L. and Paños, D. ( 1998). Dynamic Properties of Thermoplastic Butadiene-styrene (SBS) and Oxidized Short Carbon Fiber Composite Materials, Journal of Applied Polymer Science, 67(10): 1819-1826.
38.
Kodama, M. and Karino, I. ( 1986). Effect of Polar Groups of Polymer Matrix on Reinforced - Matrix Interaction in Kevlar Fiber-reinforced Composites, Journal of Applied Polymer Science, 32(6): 5057-5069.
