The tribological performance of PA6 and carbon fiber-reinforced polyamide 6 (CF/PA6) under dry sliding condition was examined. Different contents of carbon fibers were employed as reinforcement. All filled and unfilled polyamide 6 composites were tested against CGr15 ball and representative testing was performed. The effects of carbon fiber content on tribological properties of the composites were investigated. All filled polyamide 6 has superior tribological characteristics to unfilled polyamide 6. The optimum wear reduction is obtained when the content of carbon fiber is 20 vol%.
Palabiyik, M. and Bahadur, S. (2000). Mechanical and Tribological Properties of Polyamide 6 and High Density Polyethylene Polyblends with and without Compatibilizer, Wear, 246(1-2): 149-158.
2.
Van de Velde, F. and De Baets, P. (1997). The Friction and Wear Behaviour of Polyamide 6 Sliding against Steel at Low Velocity underVery High Contact Pressures, Wear, 209(1-2): 106-114.
3.
Gopal, P., Dharani, L.R. and Blum, F.D. ( 1994). Fade and Wear Characteristics of a Glass Fibre Reinforced Phenolic Friction Material, Wear, 174: 119-127.
4.
Bijwe, J., Logani, C.M. and Tewari, U.S. ( 1990). Friction and Wear Studies of Polyetherimide Composites , Wear, 138: 61-76.
5.
McGee, A.C. , Dharan, C.K.H. and Finnie, I. (1987). Abrasive Wear of Graphite, Fiber-reinforced, Polymer Composite Materials, Wear, 114: 97-107.
6.
Yoo, J.H. and Eiss, N.S. (1993). Tribological Behaviour of Blends of Poly(ether ether ketone) and Poly(ether imide), Wear, 162: 418-425.
7.
Bijwe, J., Indumathi, J., Rajesh, J.J. and Fahim, M. ( 2001). Friction and Wear Behaviour of Polyetherimide Composites in Various Wear Modes, Wear, 249: 715-726.
8.
Xian, G. and Zhang, Z. ( 2005). Sliding Wear of Polyetherimide Matrix Composites . II: Influence of Graphite Flakes, Wear, 258: 776-782.
9.
Palabiyik, M. and Bahadur, S. (2002). Tribological Studies of Polyamide 6 and High Density Polyethylene Blends Filled with PTFE and Coper Oxide and Reinforced with Short Glass Fibers, Wear , 253: 369-376.
10.
Friedrich, K., Lu, Z. and Hager, A.M. (1995). Recent Advances in Polymer Composites’ Tribology, Wear , 190: 139-144.
11.
Bahadur, S. , Fu, Q. and Dong, D. (1994). The Effect of Reinforcement and Syner-GISM between CuS and Carbon Fibre on the Wear of Nylon, Wear, 178: 123-130.
12.
Wang, J., Gu, M., Songhao, B. and Ge, S. ( 2003). Properties of Carbon Fiber Reinforced Nylon 1010 Composites , Wear, 255: 774-779.
13.
Ibarra, L. and Panos, D. ( 1998). Dynamic Properties of Thermoplastic Butadiene-styrene (SBS) and Oxidized Short Carbon Fiber Composite Materials, J. Appl. Polym. Sci., 67: 1819-1826.
14.
Amash, A. and Zugenmaier, P. ( 1997). Thermal and Dynamic Mechanical Investigation on Fiber-reinforced Polypropylene Composites, J. Appl. Polym. Sci., 63: 1143-1154.
15.
Lu, Z.P. and Friedrich, K. (1995). On Sliding Friction and Wear of PEEK and its Composites, Wear, 181-183: 624-631.
16.
Simm, W. and Freti, S. ( 1989). Abrasive Wear of Multiphase Materials, Wear, 129: 105-121.
17.
Thorp, J.M. (1982). Abrasive Wear of Some Commercial Polymers, Tribol. Int., 15: 59-73.
18.
Liu, J. ( 1993). Material Wear Principle and Wear Resistance, Tsinghua University Press, Beijing.
19.
Flock, J., Friedrich, K. and Yuan, Q. ( 1999). On the Friction and Wear Behaviour of PAN- and Pitch-carbon Fiber Reinforced PEEK Composites, Wear, 225-229: 304-311.
20.
Kukureka, S.N. , Hooke, C.J., Rao , M., Liao, P. and Chen, Y.K. (1999). The Effect of Fibre Reinforced on the Friction and Wear of Polyamide 66 under Dry Rolling-sliding Contact, Tribol. Int., 32: 107-116.
Pihtili, H. and Tosun, N. ( 2002). Effect of Load and Speed on the Wear Behaviour of Woven Glass Fabrics and Aramid Fibre-reinforced Composites, Wear , 252: 979-984.
23.
Reinicke, R. , Haupert, F. and Friedrich, K. ( 1998). On the Tribological Behaviour of Selected Injection Moulded Thermoplastic Composites, Composites A, 29: 763-771.
24.
Zhang, G., Liao, H., Li, H., Mateus, C., Bordes, J.M. and Coddet, C. ( 2006). On Dry Sliding Friction and Wear Behaviour of PEEK and PEEK/SiC-composite Coatings, Wear, 260: 594-600.
25.
Li, J., Liao, H. and Coddet, C. ( 2002). Friction and Wear Behavior of Flame-sprayed PEEK Coatings , Wear, 252: 824-831.
26.
Hanmin, Z., Guoren, H. and Guicheng, Y. ( 1987). Friction and Wear of Poly(phenylene sulphide) and its Carbon Fibre Composites: 1 Unlubricated, Wear, 116: 59-68.
27.
Friedrich, K. , Flock, J., Varadi , V. and Neder, Z. (2001). Experimental and Numerical Evaluation of the Mechanical Properties of Compacted Wear Debris Layers Formed Between Composite and Steel Surfaces in Sliding Contact, Wear, 251: 1202-1212.
28.
Jahanmir, S. and Suh, N.P. ( 1997). Abrahamson, Microscopic Observations of the Wear Sheet Formation by Delamination, Wear, 44: 235-249.
29.
Hu, M.S. (1991). The Flow Behaviour of Al-SiCp Composites, Scripta Metall., 25: 695-700.
