The present investigation is focused on the utilization of abundantly available industrial waste, i.e., fly-ash in a useful manner by dispersing it into aluminum/aluminum—magnesium matrix to produce composites by a liquid metallurgy route. Composites are produced with different percentage of reinforcing phase. Further, these composites are characterized using XRD, wet chemical analysis, and image analysis. Mechanical and wear properties of the composites are evaluated.
Akbulut, M., Darman, F. and Yilmaz, (1998). Dry Wear and Friction Properties of δ-Al2O3 Short Fiber Reinforced Al-Si (LM 13) Alloy Metal Matrix Composites, Wear, 215: 170-179.
2.
Skolianos, S. and Kattamis, T.Z. (1993). Tribological Properties of SiCp-reinforced Al-4.5% Cu-1.5% Mg Alloy Composites, Mater. Sci. Engg, A163: 107-113.
3.
Jiang, J.Q., Tan, R.S. and Ma, A.B. ( 1996). Dry Sliding Wear Behaviour of Al2O3-Al Composites produced by Centrifugal Force Infiltration, Mater. Sci. Technol. , 12: 483-488.
4.
Surappa, M.K. and Prasad, S.C. (1982). Wear and Abrasion of Cast Al-Alumina Particle Composites, Wear, 77: 295-302.
5.
Kosel, T.H. and Fiore, N.F. ( 1981). Abrasive Wear in Multiphase Microstructures, J. Mater. Energy Sys., 3: 7-27.
6.
Baker, T.N. and Gürcan, A.B. ( 1995). Wear behaviour of AA6061 Aluminium Alloy and its Composites , Wear, 188: 185-191.
7.
Axen, N. and Jacobson, S. ( 1994). Transitions in the Abrasive Wear Resistance of Fibre- and Particle-reinforced Aluminium, Wear, 178: 1-7.
8.
Sheu, S.-Y. and Lin, S.-J. ( 1996). Particle Size Effects on the Abrasive Wear of 20 vol% SiCp/7075Al Composites, Scr. Mater., 35: 1271-1276.
9.
Rohatgi, P.K. , Weiss, D. and Gupta, N. (2006). Applications of Fly Ash in Synthesizing Low-cost MMCs for Automotive and other Applications, JOM, 58: 71-76.
10.
Rohatgi, P.K. and Guo, R.Q. (1997). Opportunities of Using Fly Ash Particles for Synthesis of Composites, Proceedings of the 59th Annual American Power Conference, Chicago, pp. 828-833.
11.
Koczak, M.J. and Prem Kumar, M.K. (1993). Emerging Technologies for the in situ Production of MMCs, JOM, 45: 44-48.
12.
Maity, P.C. , Chakraborty, P.N. and Panigrahi , S.C. (1994). Preparation of Al-MgAl2O4-MgO in situ Particle-composites by Addition of MnO2 Particles to Molten Al-2 wt% Mg Alloys, Mat. Letters , 20: 93-97.
13.
Kuruvilla, A.K., Prasad, K.S., Vanu Prasad, V.V. and Mahajan, R. ( 1990). Microstructure-property Correlation in Al/TiB2 (XD) Composites , Scripta Metall., 24: 873-878.
14.
Maity, P.C. , Chakraborty, P.N. and Panigrahi , S.C. (1993). Preparation of Aluminium-alumina in situ Particle Composite by Addition of Titania to Aluminium Melt, Scripta Metall. Mater., 28: 549-552.
15.
Sahoo, P. and Koczak, M.J. ( 1991). Analysis of in situ Formation of Titanium Carbide in Aluminum Alloys, Mat. Sci. Engg, A144: 37-44.
