Physical Properties of Novel Layered Composites of Wood Flour and PVC

Abstract

Various formulations of wood flour and rigid Poly Vinyl Chloride (PVC) composites were prepared and the effects of layering and composite composition on their physical properties were studied. Beech wood flour, PVC, Maleic Anhydride Polyethylene (MAPE), and beech veneer were used to produce the composites in a two-step conventional hot press system. Physical property tests, including equilibrium moisture content (EMC), long term water absorption and thickness swelling were carried out. The results indicated that, by the increase in PVC content from 20% to 30%, EMC, maximum water absorption and maximum thickness swelling decreased. No significant relationship was observed between PVC content and water diffusion coefficient, whereas layered composites on average had higher water diffusion coefficients in comparison with unlayered composites. Results of laminating revealed that it caused a decrease in the EMC, and an increase in maximum water absorption and maximum thickness swelling.

Keywords

composite materials polymers wood flour PVC water absorption layer.

Get full access to this article

View all access options for this article.

References

Clemons, C. (2002). Wood-Plastic Composites in the United States, Forest Products Journal, 52(6): 10-18.

Wang, W. and Morrell, J.J. (2004). Water sorption characteristics of two wood-plastic composites, Forest Products Journal, 54(12): 209-212.

Chetanachan, W. , Sookkho, D. , Sutthitavil, W. , Chantasatrasam , N. and Sinsermsuksakul, R. (2001 ). PVC Wood: A New Look in Construction, Journal of Vinyl & Additive Technology, 7(3): 134-137.

Matuana, L.M. , Balatinecz, J.J. and Park, C.B. (1998). Effect of Surface Properties on the Adhesion between PVC and Wood Veneer Laminates, Polymer Engineering and Science, 38(5): 765-773.

Guffey, V.O. and Sabbagh, A.B. (2002). PVC/Wood-flour Composites Compatibilized with Chlorinated Polyethylene, Journal of Vinyl & Additive Technology, 8(4): 259-263.

Islam, M.N. , Khan, M.A. , Alam, M.K. , Zaman, M.A. and Matsubayashi, M. (2003). Study of Water Absorption Behavior in Wood Plastic Composites by Using Neutron Radiography Technique , Polymer Plastics Technology & Engineering, 42(5): 925-934.

Tajvidi, M. and Ebrahimi, G.H. (2003). Water Uptake and Mechanical Characteristics of Natural Filler-Polypropylene Composites, Journal of Applied Polymer Science, 88(4): 941-946.

Yadav, P. , Nema, A. , Varghese, S. and Nema, S.K. (1999). Water Uptake and Mechanical Characteristics of Natural Filler-Polypropylene Composites, Polymer Engineering and Sciences, 39(8): 1550-1556.

Tajvidi, M. , Kazemi Najafi, S. and Moteei, N. (2006). Long-Term Water Uptake Behavior of Natural Fiber/Polypropylene Composites, Journal of Applied Polymer Science, 99(5): 2199-2203.

10.

Siau, J.F. (1984). Transport Processes in Wood, p. 245, Springer-Verlag, New York.