Sage Journals: Discover world-class research

Abstract

Statistical formulations of the master curves for the constant strain rate (CSR), creep and fatigue strengths of CFRP laminates, which depend on time and temperature as well as the number of cycles to failure, are proposed, based on Christensen's theory which describes statistically the crack kinetics in viscoelastic body. The master curves of these strengths of the plain-woven fabric T300/vinylester CFRP, the flat fabric T700/vinylester CFRP and the multi-axial knitted fabric T700/vinylester CFRP laminates were measured by the accelerated testing methodology in our previous paper. The quantitative characteristics of CSR, creep and fatigue master curves for these CFRP laminates are discussed using the results of our statistical formulations. Finally, it is demonstrated that our formulation of the master curves is available and practical for long-term durability design for CFRP laminate.

Keywords

CFRP fatigue life prediction time and temperature dependence formulation statistics.

Get full access to this article

View all access options for this article.

References

Aboudi, J. and Cederbaum, G. (1989). Analysis of Viscoelastic Laminated Composite Plates , Composite Structure, 12: 243—256.

Sullivan, J. (1990). Creep and Physical Aging of Composites, Composite Science and Technology, 39: 207—232.

Gates, T. (1992). Experimental Characterization of Nonlinear, Rate Dependent Behavior in Advanced Polymer Matrix Composites, Experimental Mechanics, 32: 68—73.

Rotem, A. and Nelson H.G. (1981). Fatigue Behavior of Graphite-Epoxy Laminates at Elevated Temperatures, In: Fatigue of Fibrous Composite Materials , ASTM STP 723: 152—173.

Kharrazi, M.R. and Sarkani, S. (2001). Frequency-dependent Fatigue Damage Accumulation in Fiber-reinforced Plastics, Journal of Composite Materials, 35: 1924—1953.

Miyano, Y. , Nakada, M. , McMurray, M.K. and Muki, R. (1997). Prediction of Flexural Fatigue Strength of CFRP Composites under Arbitrary Frequency, Stress Ratio and Temperature, Journal of Composite Materials, 31: 619—638.

Miyano, Y. , Nakada, M. and Muki, R. (1999). Applicability of Fatigue Life Prediction Method to Polymer Composites, Mechanics of Time-dependent Materials , 3: 141—157.

Miyano, Y. , Nakada, M. , Kudoh, H. and Muki, R. (1999). Prediction of Tensile Fatigue Life under Temperature Environment for Unidirectional CFRP, Advanced Composite Materials , 8: 235—246.

Miyano, Y. , Tsai, S.W. , Christensen, R.M. and Kuraishi, A. (2001). Accelerated Testing for the Durability of Composite Materials and Structures, Long Term Durability of Structural Materials (Durability 2000), Elsevier, 265—276.

10.

Miyano, Y. , Tsai, S.W. , Christensen, R.M. and Muki, R. (2002). Accelerated Testing Methodology for the Durability of Composite Materials and Structures, Proceedings of the 5th Composites Durability Workshop, Paris, 1—14.

11.

Miyano, Y. , Nakada, M. and Sekine, N. (2005). Accelerated Testing for Long-term Durability of FRP Laminates for Marine Use, Journal of Composite Materials , 39: 5—20.

12.

Materials System Research Laboratory, KIT. (2007). MSRL-ONR Data Base (Version 1.0), Materials System, 25: 95—147.

13.

Christensen, R. and Miyano, Y. (2006). Stress Intensity Controlled Kinetic Crack Growth and Stress History Dependent Life Prediction with Statistical Variability, International Journal of Fracture, 137: 77—87.

14.

Christensen, R. and Miyano, Y. (2007). Deterministic and Probabilistic Lifetimes from Kinetic Crack Growth—Generalized Forms, International Journal of Fracture, 143: 35—39

Statistical Formulation for Time-temperature Dependent Flexural Strength of CFRP Laminates

Abstract

Keywords

Get full access to this article

References