This paper is concerned with the applicability of the statistical linear cumulative damage (SLCD) rule for predicting the fatigue life under variable cyclic loading for CFRP laminates. The three-point bending fatigue tests for plain-woven and quasi-isotropic CFRP laminates were carried out under various cyclic loadings with constant and variable load amplitude and frequency. As a result, the applicability of SLCD rule to the flexural fatigue life of these CFRP laminates was confirmed for the cases of variable frequency as well as variable amplitude from the viewpoint of statistics.
Aboudi, J. and Cederbaum, G. (1989). Analysis of Viscoelastic Laminated Composites Plates, Composite Structures, 12: 243—256.
2.
Miyano, Y., McMurray, M.K., Enyama, J. and Nakada, M. (1994). Loading Rate and Temperature Dependence on Flexural Fatigue Behavior of a Satin Woven CFRP Laminate, Journal ofComposite Materials, 28(13): 1250—1260.
3.
Miyano, Y., McMurray, M.K., Kitade, N., Nakada, M. and Mohri, M. (1994). Role of Matrix Resin on the Flexural Static Behavior of Unidirectional Pitch-based Carbon Fiber Laminates, Advanced Composite Materials, 4(2): 87—99.
4.
Miyano, Y., Nakada, M. and McMurray, M.K. (1995). Influence of Stress Ratio on Fatigue Behavior in the Transverse Direction of Unidirectional CFRPS, Journal ofComposite Materials, 29(14): 1808—1822.
5.
Miyano, Y., Nakada, M., McMurray, M.K. and Muki, R. (1997). Prediction of Flexural Fatigue Strength of CFRP Composites under Arbitrary Frequency, Stress Ratio and Temperature, Journal ofComposite Materials, 31: 619—638.
6.
Miyano, Y., Nakada, M. and Muki, R. (1997). Prediction of Fatigue Life of a Conical Shaped Joint System for Fiber Reinforced Plastics under Arbitrary Frequency, Load Ratio and Temperature, Mechanics of Time-Dependent Materials, 1: 143—159.
7.
Miyano, Y., Nakada, M., Kudo, H. and Muki, R. (1999). Prediction of Tensile Fatigue Life under Temperature Environment for Unidirectional CFRP, Advanced Composite Materials , 8: 235—246.
8.
Miyano, Y., Nakada, M. and Muki, R. (1999). Applicability of Fatigue Life Prediction Method to Polymer Composites, Mechanics of Time-Dependent Materials , 3: 141—157.
9.
Miyano, Y., Nakada, M., Kudo, H. and Muki, R. (2000). Prediction of Tensile Fatigue Life for Unidirectional CFRP, Journal ofComposite Materials, 34: 538—550.
10.
Christensen, R. and Miyano, Y. (2006). Stress Intensity Controlled Kinetic Crack Growth and Stress History Dependent Life Prediction with Statistical Variability, International Journal ofFracture, 137: 77—87.
11.
Miner, M.A. (1945). Cumulative Damage in Fatigue , Journal of Applied Mechanics, 12: 159—164.
12.
Hashin, Z. (1985). Cumulative Damage Theory for Composite Materials: Residual Life and Residual Strength Methods, CompositesScience and Technology, 23: 1—19.
13.
Poursatip, A. and Beaumont, P.W.R. (1986). The Fatigue Damage Mechanics of a Carbon Fibre Composite Laminate: II — Life Prediction, CompositesScience and Technology, 25: 283—299.
14.
Hwang, W. and Han, K.S. (1986). Cumulative Damage Models and Multi-stress Fatigue Life Prediction, Journal ofComposite Materials, 20: 125—153.
15.
Adam, T., Gathercole, N., Reiter, H. and Harris, B. (1994). Life Prediction for Fatigue of T800/5245 Carbon-fibre Composites: II. Variable-amplitude Loading, International Journal of Fatigue, 16: 533—547.
16.
Schaff, J.R. and Davidson, B.D. (1997). Life Prediction Methodology for Composite Structures. Part I — Constant Amplitude and Two-stress Level Fatigue, Journal ofComposite Materials, 31: 128—157.
17.
Schaff, J.R. and Davidson, B.D. (1997). Life Prediction Methodology for Composite Structures. Part II — Spectrum Fatigue, Journal ofComposite Materials , 31: 158—181.
18.
Harris, B., Gathercole, N., Reiter, H. and Adam, T. (1997). Fatigue of Carbon-fibre-reinforced Plastics under Block-loading Conditions, Composites Part A, 28A: 327—337.
19.
Yao, W.X. and Himmel, N. (2000). A New Cumulative Fatigue Damage Model for Fibre-reinforced Plastics, CompositesScience and Technology, 60: 59—64.
