Studies were carried out on a RT-cure epoxy (LY556 + HY951) composite system filled with the Al and Cu particles. Results showed that the wear loss and COF of both the composites increased with sliding distance and contact load for the range of filler content considered. Further, it was observed that the Cu-Epoxy composite exhibited superior wear resistance compared to the Al-Epoxy composites. From the experimental data, a ``wear endurance index'' was identified which can serve as a parameter to assess the long term wear life (residual wear life) of these composites.
Chanda, M. and Salil, R.K. (1997). Plastic Technology Handbook, 3rd edn, Marcel Dekker, New York .
2.
Brito, Z. and Sanchez, G. (2000). Influence of Metallic Fillers on the Thermal and Mechanical Behaviour in Composites of Epoxy Matrix, Composite Structures, 48: 79—81.
3.
Friedrich, K. (ed) (1993). Advances in Composites Tribology, In: Pipes, R. B. (ed), Composite Material Series, Amsterdam. Elsevier, The Netherlands.
4.
Kaushal, S. and Kishore ( 1992). Analysis of Deformation Behavior and Fracture Features in Glass-Epoxy Composites Toughened by Rubber and Carbon Additions, Journal of Materials Science Letters, 11: 86—88.
5.
Vasconcelos, P.V., Jorge Lino, D., Baptista , A.M. and Rui, Neto , J.L. (2006). Tribological Behaviour of Epoxy based Composites for Rapid Tooling , Wear, 260: 30—39.
6.
Bloom, P.D., Baikerlikar, K.G., Anderegg, J.W. and Sheares, V.V. (2003). Fabrication and Wear Resistance of Al—Cu—Fe Quasicrystal-epoxy Composites Materials, Materials and Engineering A, 360: 46—57.
7.
Bahadur, S. and Deli Gong (1992). The Action of Fillers in the Modification of the Tribological Behavior of Polymers, Wear, 158: 41—59.
8.
Chang, L., Zhang, Z., Breidt, C. and Friedrich, K. (2005). Tribological Properties of Epoxy Nanocomposiotes 1. Enhancement of the Wear Resistance by Nano TiO2 Particles, Wear, 258: 141—148.
9.
Kota, K. (2000). Wear in Relation to Friction—A Review, Wear, 241: 151—157.
