In this study, bearing strength of woven glass—fiber composite plates has been statistically analyzed by Weibull distribution. The ratio of the edge distance to the pin diameter (E/D), and the ratio of the specimen width to the pin diameter (W/D) were systematically varied during analyses. Eight specimens were tested for each specimen configuration. The results show that the 99% reliability values of each bearing strength configuration is approximately equivalent to the 0.7 average value of the bearing strength. In addition, the bearing strengths obtained from Weibull distribution and from average value reach their upper limit when (E/D) and (W/D) ratios are equal or greater than 4.
Chang, F.K., Scott, R.A. and Springer, G.S. (1984). Failure Strength of Nonlinearly Elastic Composite Laminates Containing a Pin Loaded Hole. J. Compos. Mater. , 18: 465—475.
2.
Wang, S.H., Hung, C. and Chang, F.K. (1996). Bearing Failure of Bolted Composite Joints. Part I: Experimental Characterization, J. Compos. Mater., 30: 1285—313.
3.
Okutan, B., Aslan, Z. and Karakuzu, R. (2001). A Study of the Effects of Various Geometric Parameters on the Failure Strength of Pin-loaded Woven Glass-fibre Reinforced Epoxy Laminate, J. Comp. Sci. Tech., 61: 1491—1497.
4.
Collings T. (1982). On the Bearing Strengths of CFRP Laminates, Composites, 13: 241—252.
5.
Akay, M. and Kong, Ah. M. S. (1995). Bearing Strength of Autoclave and Oven Cured Kevlar/Epoxy Laminates Under Static and Dynamic Loading. Composites, 26(6): 451—456.
6.
Herrington P.D. and Sabbaghian, M. (1993). Fatigue Failure of Composite Bolted Joints, J. Compos Mater., 27: 491—512.
7.
Aktaş, A. and Dirikolu, M.H. (2003). The Effect of Stacking Sequence of Carbon Epoxy Composite Laminates on Pinned-joint Strength, Compos. Struct., 62: 107—11.
8.
Hallinan, Jr A.J. (1993). A Review of the Weibull Distribution, Journal of Quality Technology, 25(2): 85—93.
9.
Dodson. (1994). Weibull Analysis, American Society for Quality.
10.
Barbero, E., Fernandez-Saez, J. and Navarro, C. (2000). Statistical Analysis of the Mechanical Properties of Composite Materials, Composites: Part B: Engineering, 31: 375—381.
11.
ASTM-STP 723American Society for Testing Materials, 1981, pp. 21—30.
12.
Tensile Properties of Fiber-Resin Composites, ASTM D 3039-76, American National Standard, 1976.
13.
Ghosh, A. (1999). A FORTRAN Program for Fitting Weibull Distribution and Generating Samples, Computers and Geosciences, 25: 729—738.
14.
Taljera, R. (1981). Estimation of Weibull Parameters for Composite Material Strength and Fatigue Life Data, ASTM STP723, pp. 291—311.
