Hemp strands as natural lignocellulosic fibers are used to reinforce polypropylene composites obtained by injection molding. The aim of this work is to improve the final mechanical properties using simple and cheap treatments. Therefore, a refining process is applied to increase the specific surface and the fibrillation of hemp strands resulting in a better mechanical anchoring and adhesion with the matrix. The hydrophilic nature of the hemp strands is diminished by surface chemical treatment with alkyl ketene dimmer (AKD) in aqueous media. Final mechanical properties of hemp composites are studied and compared to those of glass fiber reinforced polypropylene composites. The fiber length and diameter of fiber reinforcement during processing are also analyzed. The results thus obtained show that the specific mechanical properties at yield of hemp composites may increase 80% of the mechanical properties of glass fiber composites.
Pervaiz, M. and Sain, M. M. (2003). Sheet-Moulded Polyolefin Natural Fiber Composites for Automotive Applications , Macromol. Mater. Eng., 288(7): 553–557 .
2.
Karus, M. and Kaup, M. (2002). Natural Fibres in the European Automotive Industry , Journal of Industrial Hemp, 7(1): 117–129 .
3.
Manitoba Hemp Association (2000). Market Opportunity for Industrial Hemp Fibre-based Products, http://www.gov.mb.ca/agriculture/crops/hemp/bko07s01.html, Triple R Community Futures Development Corporation, and Manitoba Rural Adaptation Council .
4.
Dweib, M. A. , Hu, B. , O'Donnell, A. , Shenton, H. W. and Wool, R. P. (2004). All Natural Composite Sandwich Beams for Structural Applications , Compos. Struct., 63(2): 147–157 .
5.
Hautala, M. , Pasila, A. and Pirila, J. (2004). Use of Hemp and Flax in Composite Manufacture: A Search for New Production Methods , Compos. Part-A Appl. Sci. Manuf., 35(1): 11–16 .
6.
Snijder, M. H. B. (2000). Reinforcement of Commodity Plastics by Hemp, Flax and Jute Fibres – Extending the Market Opportunity , In: Online Proceedings 3rd International Symposium, Bioresource Hemp other Fiber Crops, 13–16 September, Wolfsburg, Germany.
7.
Karus, M. ( 2002 ). European Hemp Industry 2001: Cultivation, Processing, and Product Lines, European Industrial Hemp Association (EIHA)www.eiha.org/hemp-industry-e.htm, Industrial Crops Newsletter .
8.
Rana, A. K. , Manda, A. , Mitra, B. C. , Jacobson, R. , Rowell, R. and Banerjee, A. N. (1997). Short Jute Fiber-Reinforced Polypropylene Composites: Effect of Compatibilizer , J. Appl. Polym. Sci., 69(2): 329–338 .
9.
Cyras, V. P. , Vallo, C. , Henny, J. M. and Vazquez, A. (2004). Effect of Chemical Treatment on the Mechanical Properties of Starch-based Blends Reinforce with Sisal Fibre , J. Comp. Mat., 38(16): 1387–1399 .
10.
Blezki, A. K. , Fink, H.-P. and Specht, K. (2004). Unidirectional Hemp and Flax EP - and PP-Composites: Influence of Defined Fiber Treatments , J. Appl. Polym Sci., 93(5): 2150–2156 .
11.
Sarifah, H. A. and Ansell, M. P. (2003). The Effect of Alkalisation and Fibres Alignment on the Mechanical and Thermal Properties of Kenaf and Hemp Bast Fibre Composites: Part 1 – Polyester Resin Matrix , Compos. Sci. Technol., 64(9): 1219–1230 .
12.
Mishra, S. , Mishra, M. , Tripathy, S. S. , Nayak, S. K. and Mohanty, A. K. (2001). Graft Copolymerization of Acrylonitrile on Chemically Modified Sisal Fibers , Macromol. Mater. Eng., 286(2): 107–113 .
13.
Mohanty, S. , Nayak, S. K. , Verma, S. K. and Tripathy S. S. (2004). Effect of MAPP as a Coupling Agent on the Performance of Jute-PP Composites , J. Reinf. Plast. Comp., 23(6): 625–637 .
14.
Karmaker, A. C. and Youngquist, J. A. (1996). Injection Moulding of Polypropylene Reinforced with Short Jute Fibers , J. Appl. Polym. Sci., 62(8): 1147–1151 .
15.
Maldas, D. and Kokta, B. V. (1993). Interfacial Adhesion of Lignocellulosic Materials in Polymer Composites: An Overview , Compos. Interf., 1(2): 87–108 .
16.
Moser, K. (1992). Faser-Kunststoffverbund, VDI Verlag, Dusseldorf .
17.
Vilaseca, F. , Lopez, A. , Llauro, X. , Pelach, M. A. and Mutje, P. (2004). Hemp Strands as Reinforcement of Polystyrene Composites , Chem. Eng. Res. Des., 82(A11): 1425–1431 .
18.
Brydson, J. A. (1975). Plastic Materials, 3rd edn, Newnes Butterworths, London , Chap. 11.
19.
Carrasco, F. , Mutje, P. and Pelach, M. A. (1996). Refining of Bleached Cellulosic Pulps: Characterization by Application of the Colloidal Titration Technique , Wood Sci. Technol., 30(4): 227–236 .
20.
Nakagaito, A. N. and Yano, H. (2004). The Effect of Morphological Changes from Pulp Fiber Towards Nano-scale Fibrillated Cellulose on the Mechanical Properties of High-strength Plant Fiber based Composites , Appl. Phys. A-Mater. Sci. Process, 78(4): 547–552 .
21.
Isogai, A. (2001). Effect of Alkylketene Dimer Treatments on Water Repellency of Various Organic and Inorganic Materials , Sen-I Gakkaishi, 57(1): 1–6 .
22.
Roberts, J. C. , Garnier, D. N. and Akpabio, U. D. (1985). Neutral Sizing and the Mechanism of Alkyl Ketene Dimmer Sizing, In: Vaugham Punton (ed.), Papermaking Raw Materials – Their Interaction with the Production Process and their Effect on Paper Properties, pp. 815–837, Mechanical Engineering Publications Ltd, London .
23.
Bottorff, K. J. (1994). AKD Sizing Mechanism: A more Definitive Description , Tappi J., 77(4): 105-105 .
24.
Pavithran, C. , Mukherjee, P. S. and Brahmakumar, M. (1991). Coir Glass Intermingled Fiber Hybrid Composites , J. Reinfor. Plast. Compos., 10(1): 91-91 .
25.
Varma, I. K. , Krishnan, S. R. A. and Krishnamoorthy, S. (1989). Composites of Glass Modified Jute Fabric and Unsaturated Polyester Resin , Composites, 20(4): 383-383 .
26.
Karnani, R. , Krishnan, M. and Narayan, R. (1997). Biofier-Reinforced Polypropylene Composites , Polym. Eng. Sci., 37(2): 146-146 .
27.
Terayama, H. (1952). Method of Colloid Titration (A New Titration between Ions) , J. Polym. Sci., 8(2): 243–253 .
28.
Rouger, J. and Mutje, P. (1984). Correlation between the Cellulose Fibres Beating and the Fixation of a Soluble Cationic Polymer , Brit. Polym. J., 16(2): 83-83 .
29.
Carrasco, F. , Mutje, P. and Pe` lach, M. A. (1998). Control of Retention in Papermaking by Colloid Titration and Zeta Potential Techniques , Wood Sci. Technol., 32(2): 145-145 .
30.
Bledzki, A. K. and Gassan, J. (1999). Composites Reinforced with Cellulose base Fibres , Prog. Polym. Sci., 24(2): 221-221 .
31.
Felix, J. (1993). Enhancing Interactions between Cellulose Fibres and Synthetic Polymers, PhD Thesis, Chalmers University of Technology, Goteborg.
32.
Arbelaiz, A. , Fernandez, B. , Ramos, J. A. , Retegi, A. , Llano-ponte, R. and Mondragon, I. (2005). Mechanical Properties of Short Flax Fibre Bundle/Polypropylene Composites: Influence of Matrix/Fibre Modification, Fibre Content, Water Uptake and Recycling , Compos. Sci. Technol., 65(10): 1582–1592 .
33.
Mohanty, A. K. , Misra, M. and Hinrichsen, G. (2000). Biofibres, Biodegradable Polymers and Biocomposites: An Overview , Macromol. Mater. Eng., 276(3–4): 1–24 .
34.
Colom, X. , Carrasco, F. , Page` s, P. and Canavate, J. (2003). Effects of Different Treatments on the Interface of HDPE/Lignocellulosic Fibre Composites , Compos. Sci. Technol., 63(2): 161–169 .
