Plasma perfusion with the anion exchange resin BR-601 is an effective method to treat patients with hepatic failure and hyperbilirubinemia. To assess the temperature dependency of bilirubin sorption in vitro, isotherm studies with human pathologic plasmas and an albumin-bilirubin solution were carried out. Results showed that BR-601 was more effective at 37°C and 42°C than at 4°C and 25°C for sorbing bilirubin. Therefore, plasma sorption at near physiologic temperature would be expected to be more efficient for plasma treatment than sorption at ambient temperature.
AsanumaY, MalcheskyPS, ZawickiI, Clinical hepatic support by on-line plasma treatment with multiple sorbents: evaluation of system performance. Trans Am Soc Artif Intern Organs1980; 26:400–4.
2.
CareyWD, SmithJ, AsanumaY, Pruritus of cholestasis treated with plasma perfusion. Am J Gastroenterol1981; 76:330–7.
3.
SakagamiK, MiyazakiM, MatsuokaJ, ShiozakiS, SaitoS, OritaK.Artificial liver support for postoperative hepatic failure with anion exchange resin (BR-601). Acta Med Okayama1986;40(5):249–55.
4.
OuchiK, PiatkiewiczW, MalcheskyPS, CareyWD, HermannRE, NoséY.An efficient, specific and blood compatible sorbent system for hepatic assist. Trans Am Soc Artif Intern Organs1978;24:246–9.
5.
AsanumaY, SmithJW, MalcheskyPS, Preclinical evaluation of membrane plasmapheresis with on-line bilirubin removal. Artificial Organs, Proceedings of the 2nd Meeting of ISAO, Hepatic and Pancreatic Assist, 1979; 279–83.
6.
TakaseS, BabaS.A study of bilirubin adsorption in bilirubin adsorbent BR-601. In: OdaT, ed Therapeutic Plasmapheresis (V) Stuttgart, New York: Schattauer, 1986; 175–8.
7.
SidemanS, NorL, BrandesJM. Removal of bilirubin by hemoperfusion with ion exchange resin. Trans Am Soc Artif Intern Organs1979; 25:497–501.
8.
PiatkiewczW, MalcheskyP, ZawickiI, Evaluation of sorbent and device efficiency for solute removal. Artificial Organs Proceedings of the 2nd Meeting of ISAO1979;3(S):71–6.
9.
KovachJL. Gas phase adorption. In: SchweitzerPA, ed. Handbook of separation techniques for chemical Engineers.New York: McGraw Hill Book Co., 1979; 3–30.
