Evaluation of Design Parameters (α and β) for Analysis and Design of Piles on Soft Clays

Abstract

This paper presents the analyses of 12 prestressed concrete instrumented test piles (TPs) that were driven in different bridge construction projects of Louisiana as part of a load testing program. The 12 TPs were driven mainly in cohesive soils. Detailed soil characterizations including both laboratory and in situ tests were conducted to determine the different soil properties. The TPs were instrumented with vibrating wire strain gauges to be able to calculate the distribution of skin friction and end-bearing capacities separately. Static load tests and dynamic load tests were conducted on each TP after end of driving to calculate the ultimate load capacity. Fifty six soil layers exhibiting clayey soil behavior and sandy soil behavior dominated the remaining 15 soil layers. The total stress parameter (α) and the effective stress parameter (β) were back-calculated for each soil layer. The α values ranged from 0.22 to 1.80, and the β values ranged from 0.11 to 0.83. Regression analyses were performed on 42 soil layers (75% data) to develop an empirical model to predict α as a function of undrained shear strength. The remaining 25% of the data were used to verify the developed model, and good agreement was observed between the measured and predicted values.

Keywords

infrastructure geology and geoenvironmental engineering foundations of bridges and other structures general soil and rock properties field testing soil characteristics

Get full access to this article

View all access options for this article.

References

Tomlinson

M. J.

The Adhesion of Piles Driven in Clay. Proc., 4th International Conference on Soil Mechanics and Foundation Engineering, London, Vol. 2, 1957, pp. 66–71.

American Petroleum Institute [API]. Recommended Practice for Planning, Designing and Constructing Fixed Offshore Platforms. API RP2A, 5th ed. American Petroleum Institute, Dallas, TX, 1974.

Karlsrud

Clausen

C. J. F.

Aas

P. M.

Bearing Capacity of Driven Piles in Clay, the NGI Approach. Proc., 1st International Symposium on Frontiers in Offshore Geotechnics, Perth, WA, Australia, September 19–21, 2005, pp. 775–782.

Peck

R, B.

A Study of the Comparative Behavior of Friction Piles. Special Report 36, Highway Research Board, Washington, D.C., 1958.

Woodward

Boitano

Pile Loading Tests in Stiff Clays. Proc. 5th International Conference on Soil Mechanics and Foundation Engineering, Paris, Vol. 2, July 17–22, 1961, p. 177.

Kerisel

Vertical and Horizontal Bearing Capacity of Deep Foundation in Clay. In Proc., Symposium on Bearing Capacity of Settlement of Foundations, Durham, NC, 1965, pp. 45–52.

Vijayvergiya

V. N.

Focht

J. A.

A New Way to Predict Capacity of Piles in Clay. In Proc., Offshore Technology Conference, Houston, TX, 1972, Paper OTC 1718, pp. 865–874.

Dennis

N. D.

Olson

R. E.

Axial Capacity of Steel Pipe Piles in Clay. In Proc. Geotechnical Practice in Offshore Engineering, Austin, TX, 1983, pp. 370–388.

McCarthy

D. R.

Essentials of Soil Mechanics and Foundations. Reston Publishing Company, Inc., VA, 1977.

10.

Skempton

A. W.

Cast In Situ Bored Piles in London Clay. Geotechnique, Vol. 9, 1959, pp. 153–173.

11.

Broms

Pile Foundations. General Report Session 8. In Proc., 10th International Conference on Soil Mechanics and Foundation Engineering, Sweden, 1981, pp. 113–125.

12.

McClelland

Design and Performance of Deep Foundations. In Proc., Special Conf. on Performance of Earth and Earth Supporting Structures, ASCE, Purdue University, Lafayette, IN, Vol. 2, 1972, pp. 111–144.

13.

Seed

H. B.

Reese

L. C.

The Action of Soft Clay Along Friction Piles. Transactions of the American Society of Civil Engineers, Vol. 122, No. 1, pp. 731–754.

14.

Coyle

H. M.

Reese

L. C.

Load Transfer for Axially Loaded Piles in Clay. Journal of the Soil Mechanics and Foundations Division, Vol. 92, No. 2, 1966, pp. 1–26.

15.

Kulhawy

F. H.

C. S.

Jackson

Some Observations on Undrained Side Resistance of Drilled Shafts. Foundation Engineering: Current Principles and Practices Congress Evanston Illinois, Vol. 2, 1989, pp. 1011–1025.

16.

Coduto

D. P.

Foundation Design, Principles and Practices. Prentice Hall Inc., Englewood Cliffs, NJ, 1994.

17.

Cherubini

Discussion on the Paper of Y. Robert 1997. A Few Comments on Pile Design. Canadian Geotechnical Journal, Vol. 35, 1999, p. 905.

18.

Lacasse

Boisard

Consequence of the New API RP2A Guideline for Piles in Soft Clays. In Proc. 13th International Conference on Soil Mechanics and Foundation Engineering, New Delhi, India, 1994, pp. 527–530.

19.

Kolk

Van der Vandervelde

A Reliable Method to Determine Friction Capacity of Piles Driven into Clays. In Proc. Offshore Technology Conference, Houston, TX, 1996, Paper No. 7893.

20.

Burland

Shaft Friction of Piles in Clay: A Simple Fundamental Approach. Ground Engineering, Vol. 6, No. 3, 1973, pp. 30–42.

21.

Mayerhof

Bearing Capacity and Settlement of Foundations. Journal of Geotechnical and Geoenvironmental Engineering, Vol. 102, 1976, p. 11962.

22.

Flaate

Selnes

Side Friction of Piles in Clay. In Proc. 9th International Conference on Soil Mechanics and Foundation Engineering, Tokyo, 1977.

23.

Abu-Farsakh

M. Y.

Md. N.

Haque

Chen

(2016). “Field instrumentation and testing to study set-up phenomenon of piles driven into Louisiana clayey soils.”Report No. FHWA/LA.15/562, Baton Rouge, Louisiana.

24.

Haque

M. N.

Abu-Farsakh

M. Y.

Development of Analytical Models to Estimate the Increase in Pile Capacity with Time (Pile Setup) from Soil Properties. Acta Geotechnica Journal, Vol. 14, 2018, pp. 881–905.

25.

Haque

M. N.

Abu-Farsakh

Chen

Okeil

Developing a Model to Estimate Pile Setup for Individual Soil Layers on the Basis of Piezocone Penetration Test Data. Transportation Research Record: Journal of the Transportation Research Board, 2016. 2579: 17–31.

26.

Fellenius

B. H.

Riker

R. E.

O’Brien

A. J.

Tracy

G. R.

Dynamic and Static Testing in Soil Exhibiting Set-Up. Journal of Geotechnical Engineering, Vol. 115, No. 7, 1989, pp. 984–1001.