Evaluation and Load Rating of a Steel Girder In-Span Hinge Connection

Abstract

Continuous steel plate girder bridges often use intermediate expansion joints located at in-span hinges to divide the superstructure into individual units with shorter expansion lengths. One common type of in-span hinge is often termed a “shiplap joint.” This type of joint is located away from piers near the moment inflection point of the span, maximizing girder efficiency. It consists of a cantilevered portion of the superstructure supporting a suspended portion of the latter on bearings placed on dapped portions of the steel plate girders. Few references are available for the evaluation and load rating of shiplap in-span hinges used in steel girder bridges. In this study, the strength and stability of a typical shiplap hinge connection is evaluated using two methodologies: a 3D finite element model including a detailed mesh of the connection; and a proposed simplified methodology based on design equations. Load ratings of the connections based on these methodologies are compared. The proposed approach allows for a conservative assessment of the hinge without the need for a detailed finite element model.