The aerodynamic benefits of leading-edge slats in delaying flow separation on wind turbine blades are well-established. However, the specific influence of slat geometry has not been fully quantified, and the effect of turbulence intensity on slatted blades has received limited attention. This study systematically evaluated how slat shape and turbulence intensity jointly modulated aerodynamic characteristics. Numerical simulations employing the Transition SST model were conducted for the NREL Phase VI blade equipped with S809, S805 A, and S821 slat profiles across turbulence intensities ranging from 1.5% to 10.18%. Results indicate that increased turbulence generally enhanced blade torque. Geometric optimization of the slat significantly improved characteristics, with the S821 configuration achieving a maximum torque increase of 26.81%. This enhancement potentially stems from the slat’s ability to combine leading-edge and trailing-edge separation characteristics, effectively suppressing boundary layer separation and improving flow stability.
Ahmadi-BaloutakiMCarriveauRTingDS-K (2015) Performance of a vertical axis wind turbine in grid generated turbulence. Sustainable Energy Technologies and Assessments11: 178–185. https://doi.org/10.1016/j.seta.2014.12.007.
2.
Al-AbadiASeokJHärtlM, et al. (2014) Experimental Investigations of the Turbulence Impact on the performance of the HAWT.10th PhD seminar on wind energy.
3.
AndersonJrJohn D. (2010) Fundamentals of aerodynamics. AIAA Journal48(12): 2983.
4.
Bakhtiari NiaBJa’fariMRezaei RanjbarA, et al. (2023) Passive control of boundary layer flow separation on a wind turbine airfoil using vortex generators and slot. Ocean Engineering283: 115170. https://doi.org/10.1016/j.oceaneng.2023.115170
5.
Carbó MolinaADe TroyerTMassaiT, et al. (2019) Effect of turbulence on the performance of VAWTs: an experimental study in two different wind tunnels. Journal of Wind Engineering and Industrial Aerodynamics193: 103969. Available at: https://doi.org/10.1016/j.jweia.2019.103969
6.
El-AskaryWABurlandoMMohamedMH, et al. (2023) Improving performance of H-Type NACA 0021 Darrieus rotor using leading-edge stationary/rotating microcylinders: numerical studies. Energy Conversion and Management292: 117398. https://doi.org/10.1016/j.enconman.2023.117398
7.
FarhanAHassanpourABurnsA, et al. (2019) Numerical study of effect of winglet planform and airfoil on a horizontal axis wind turbine performance. Renewable Energy131: 1255–1273. https://doi.org/10.1016/j.renene.2018.08.017
8.
GiguerePSeligMS (1999) Design of a tapered and twisted blade for the NREL combined experiment rotor. NREL/SR--500-26173, 750919, 12 April. Available at. https://www.osti.gov/servlets/purl/750919/ (accessed 26 September 2025).
9.
GrassoFCoiroDBizzarriniN, et al. (2017) Design of advanced airfoil for stall-regulated wind turbines. Wind Energy Science2(2): 403–413. https://doi.org/10.5194/wes-2-403-2017
10.
GuoqiangLWeiguoZYubiaoJ, et al. (2019) Experimental investigation of dynamic stall flow control for wind turbine airfoils using a plasma actuator. Energy185: 90–101. https://doi.org/10.1016/j.energy.2019.07.017
11.
IngramG (n.d.) Wind turbine blade analysis using the blade element momentum method. Version 1.0.
12.
JiBZhongKXiongQ, et al. (2022) CFD simulations of aerodynamic characteristics for the three-blade NREL Phase VI wind turbine model. Energy249: 123670. https://doi.org/10.1016/j.energy.2022.123670
13.
JiangRZhaoZLiuY, et al. (2023) Effect of vortex generator orientation on wind turbines considering the three-dimensional rotational effect. Ocean Engineering267: 113307. https://doi.org/10.1016/j.oceaneng.2022.113307
14.
LiYWangHWuZ (2022) Aerodynamic characteristic of wind turbine with the leading edge slat and Microtab. Sustainable Energy Technologies and Assessments52: 101957. https://doi.org/10.1016/j.seta.2022.101957
15.
LiYWangHShiH, et al. (2024) The effects of the dual control method on the aerodynamic characteristics of the wind turbine blade. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects46(1): 1907–1924. https://doi.org/10.1080/15567036.2024.2302372
16.
MishraABaederJD (2016) Coupled aeroelastic prediction of the effects of leading-edge slat on rotor performance. Journal of Aircraft53(1): 141–157. https://doi.org/10.2514/1.c033236
17.
MohammadiMMaghrebiMJ (2021) Improvement of wind turbine aerodynamic performance by vanquishing stall with active multi air jet blowing. Energy224: 120176. https://doi.org/10.1016/j.energy.2021.120176
18.
NabhaniATousiNMComaM, et al. (2025) Large-scale horizontal axis wind turbine aerodynamic efficiency optimization using active flow control and synthetic jets. Energy319: 134940. https://doi.org/10.1016/j.energy.2025.134940
19.
RazzaghiMJPSaniSMRMasoumiY, et al. (2022) A comparison of various turbulence models for analysis of fluid microjet injection into the boundary layer over a flat surface.
20.
RezaeihaAMontazeriHBlockenB (2019) On the accuracy of turbulence models for CFD simulations of vertical axis wind turbines. Energy180: 838–857. https://doi.org/10.1016/j.energy.2019.05.053
21.
SedaghatAEl Haj AssadMGaithM (2014) Aerodynamics performance of continuously variable speed horizontal axis wind turbine with optimal blades. Energy77: 752–759. https://doi.org/10.1016/j.energy.2014.09.048
22.
ShiLBayeul-LainéA-CCoutier-DelgoshaO (2022) Numerical investigations on unsteady vortical flows and separation-induced transition over a cycloidal rotor at low Reynolds number. Energy Conversion and Management266: 115812. https://doi.org/10.1016/j.enconman.2022.115812
23.
ShojaeFJSalehiMJa’fariM, et al. (2025) Passive control of vortex breakdown on slender delta wing using control bump and cavity at low Reynolds number. Ocean Engineering329: 121086. https://doi.org/10.1016/j.oceaneng.2025.121086
24.
SomersDM (1996) Design and experimental results for the S809 airfoil.
25.
SunYQianYWangT, et al. (2024) Investigation of the wind turbine aerodynamic performance via the combining blowing and suction flow control. Energy307: 132505. https://doi.org/10.1016/j.energy.2024.132505
26.
SyawitriTPYaoYYaoJ, et al. (2022) Geometry optimisation of vertical axis wind turbine with Gurney flap for performance enhancement at low, medium and high ranges of tip speed ratios. Sustainable Energy Technologies and Assessments49: 101779. https://doi.org/10.1016/j.seta.2021.101779
27.
UtomoMSKTSYohanaEMahendraC, et al. (2024) Analysis of blended winglet parameters on the aerodynamic characteristics of NXXX aircraft using Computational Fluid Dynamics (CFD). Results in Engineering24: 102901. https://doi.org/10.1016/j.rineng.2024.102901
28.
WangSZhouYAlamMM, et al. (2014) Turbulent intensity and Reynolds number effects on an airfoil at low Reynolds numbers. Physics of Fluids26(11): 115107. https://doi.org/10.1063/1.4901969
WangYLiGShenS, et al. (2018) Investigation on aerodynamic performance of horizontal axis wind turbine by setting micro-cylinder in front of the blade leading edge. Energy143: 1107–1124. https://doi.org/10.1016/j.energy.2017.10.094
31.
WangYLiGLuoD, et al. (2019) Influence of microcylinders with different vibration laws on the flow control effect of a horizontal axis wind turbine. Wind Energy22(12): 1800–1824. https://doi.org/10.1002/we.2406
32.
WangHJiangXChaoY, et al. (2021) Numerical optimization of horizontal-axis wind turbine blades with surrogate model. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy235(5): 1173–1186. https://doi.org/10.1177/0957650920976743
33.
YangJYangHWangX, et al. (2022) Experimental Study of a gurney flap on a pitching wind turbine airfoil under turbulent flow conditions. Journal of Marine Science and Engineering10(3): 371. https://doi.org/10.3390/jmse10030371
34.
YeXHuJZhengN, et al. (2023) Numerical study on aerodynamic performance and noise of wind turbine airfoils with serrated gurney flap. Energy262: 125574. https://doi.org/10.1016/j.energy.2022.125574
35.
ZakiAAbdelrahmanMAAyadSS, et al. (2022) Effects of leading edge slat on the aerodynamic performance of low Reynolds number horizontal axis wind turbine. Energy239: 122338. https://doi.org/10.1016/j.energy.2021.122338
36.
ZhangTElsakkaMHuangW, et al. (2019) Winglet design for vertical axis wind turbines based on a design of experiment and CFD approach. Energy Conversion and Management195: 712–726. https://doi.org/10.1016/j.enconman.2019.05.055
37.
ZieherMBreitsamterC (2025) Prediction of aerodynamic coefficients for multi-swept delta wings via a hybrid neural network. Aerospace Science and Technology156: 109762. https://doi.org/10.1016/j.ast.2024.109762
