This article aims to predict ice loads on a wind turbine blade section at 80% of blade span, using FENSAP ICE. Using low and high liquid water content conditions of stratiform and cumuliform clouds, different icing events are simulated. Ice accretion predictions with single-shot and multi-shot approaches are presented. Blade surface roughness is also investigated, as well as the relationships between ice mass, liquid water content, median volume diameter, and temperature.
BarberSWangYJafariSet al. (2011) The impact of ice formation on wind turbine performance and aerodynamics. Journal of Solar Energy Engineering133(1): 011007.
3.
BattistiL (2015a) Relevance of icing for wind turbines. In: BattistiL (ed.) Wind Turbines in Cold Climates: Icing Impacts and Mitigation Systems. Springer, pp. 43–111.
4.
BattistiL (2015b) Wind Turbines in Cold Climates: Icing Impacts and Mitigation Systems. Springer.
BoseN (1992a) Icing on a small horizontal—axis wind turbine—Part 1: Glaze ice profiles. Journal of Wind Engineering and Industrial Aerodynamics45(1): 75–85.
7.
BoseN (1992b) Icing on a small horizontal—axis wind turbine—Part 2: Three dimensional ice and wet snow formations. Journal of Wind Engineering and Industrial Aerodynamics45(1): 87–96.
CoberSGIsaacGAStrappJW (2001) Characterizations of aircraft icing environments that include supercooled large drops. Journal of Applied Meteorology40(11): 1984–2002.
FuPFarzanehM (2010) A CFD approach for modeling the rime ice accretion process on a horizontal axis wind turbine. Journal of Wind Engineering and Industrial Aerodynamics98(4): 181–188.
12.
HabashiWGMorencyFBeaugendreH (2001) FENSAP-ICE: A comprehensive 3D simulation tool for in-flight icing. In: 7th international congress of fluid dynamics and propulsion, Sharm El Sheikh, Egypt, December.
13.
HomolaMCVirkMSWalleniusTet al. (2010a) Effect of atmospheric temperature and droplet size variation on ice accretion of wind turbine blades. Journal of Wind Engineering and Industrial Aerodynamics98(12): 724–729.
14.
HomolaMCWalleniusTMakkonenLet al. (2010b) Turbine size and temperature dependence of icing on wind turbine blades. Wind Engineering34(6): 615–627.
JeckRK (2002) Icing Design Envelopes (14 CFR Parts 25 and 29, Appendix C) Converted to a Distance Based Format (DOT/FAA/AR-00/30). Atlantic City, NJ: Federal Aviation Administration Technical Center.
17.
LamraouiFFortinGBenoitRet al. (2014) Atmospheric icing impact on wind turbine production. Cold Regions Science and Technology100: 36–49.
18.
MakkonenL (2000) Models for the growth of rime, glaze, icicles and wet snow on structures. Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences358(1776): 2913–2939.
19.
MakkonenLLaaksoTMarjaniemiMet al. (2001) Modelling and prevention of ice accretion on wind turbines. Wind Engineering25(1): 3–21.
20.
MarjaniemiMMakkonenLLaaksoT (2000) TURBICE-the wind turbine blade icing model. In: Proceedings of the BOREAS V conference, Finnish Meteorological Institute.
ReidTBaruzziGOzcerIet al. (2013) FENSAP-ICE simulation of icing on wind turbine blades. Part 1: Performance degradation. In: 51st AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition, Grapevine, TX, 7–10 January.
SpalartPAllmarasS (1992) A one-equation turbulence model for aerodynamic flows. In: 30th aerospace sciences meeting and exhibit, Reno, NV, 6–9 January.
26.
TangierJLSomersDM (1995) NREL Airfoil Families for HAWTs. Washington, DC: National Renewable Energy Laboratory, pp. 117–123.
27.
VirkMSHomolaMCNicklassonPJ (2010) Effect of rime ice accretion on aerodynamic characteristics of wind turbine blade profiles. Wind Engineering34(2): 207–218.
28.
VirkMSHomolaMCNicklassonPJ (2012) Atmospheric icing on large wind turbine blades. International Journal of Energy and Environment3(1): 1–8.
