Abstract
Aromatic polyether ether ketones are polymers whose volume of production is now increasing at a rapid rate, which is due to the important array of service properties of these polymers. Certain processing characteristics of composites based on polyether ether ketones are considered in this paper.
Keywords
Get full access to this article
View all access options for this article.
References
1.
Lee G.
, and
Parter R.S.
, Polym. Eng. Sci. , 26 (9 ): 633 (1986 ).
2.
Small R.W.H.
, Eur. Polym. J. , 22 (9 ): 699 (1986 ).
3.
Wakelyn N.T.-G.
, Polym. Sci. Polym. Chem. Eng. , 24 (9 ): 2101 (1986 ).
4.
Cebe P.
, Polym. Compos. , 9 (4 ): 271 (1888 ).
5.
Mingbi Q.
Thermochim. Acta , 134 : 223 (1988 ).
6.
Mingbi Q.
Acta Polym. Sin. , (3 ): 257 (1989 ).
7.
Wang W.
Acta Polym. Sin. , (3 ): 337 (1989 ).
8.
Wang W.
Acta Polym. Sin. , (3 ): 330 (1989 ).
9.Chem. Ind. Jap. , 39 (12 ): 1044 (1988 ).
10.
Talbott M.F.
J. Compos. Mater. , 21 (11 ): 1057 (1987 ).
11.
Wang Q.
, and
Springer G.
, J. Compos. Mater. , 23 (5 ): 434 (1989 ).
12.
Friedrich K.
Composites , 17 (3 ): 205 (1986 ).
13.
Karger-Kocsis G.
, and
Friedrich K.
, Plast. Rubb. Proc. Appl. , 8 (2 ): 91 (1987 ).
14.
Chou H.N.
, 18th Int. SAMPE Technol. Conf., Seattle, WA , Vol. 18 , Covina, CA, p. 970 (1986 ).
15.
Reilly I.I.
18th Int. SAMPE Technol. Conf. , Seattle, WA, Vol. 18 , Covina, CA, p. 22 (1986 ).
16.
Karger-Kocsis G.
J. Polym. Eng. , 8 (3-4 ): 221 (1988 ).
17.Advd Compos. Bull. , April: 5 (1990 ).
18.
Crick R.A.
J. Mater. Sci. , 22 (6 ): 2094 (1987 ).
19.
Tung C.M.
, and
Dynes P.G.
, J. Appl. Polym. Sci. , 33 (2 ): 505 (1987 ).
20.
Shukla G.G.
, and
Sichina W.G.
, Antec 84 Plast. World Econ. Proc 42nd Technol. Conf. and Exhib., New Orleans, LA , Brookfield, CT, p. 265 (1984 ).
21.
Mijovic J.
, and
Gsell T.C.
, SAMPE Q. , 21 : 42 (1990 ).
22.
Ko. F., et al., Pathway Future: 33rd Int. SAMPE Symp. and Exhib., Anaheim, CA , Covina, CA, p. 899 (1988 ).
23.
Turner F.M.
, and
Cogswell F.N.
, 18th Int. SAMPE Technol. Conf. , Seattle, WA, Vol. 18 , Covina, CA, p. 32 (1986 ).
24.
Crosby J. M.
19th Int. SAMPE Technol. Conf., Crystal City , Arlington, VA, Vol. 19 , Covina, CA, p. 476 (1987 ).
25.
Maguire D.M.
, SAMPE J. , 25 (1 ): 11 (1989 ).
26.
Maffezzoli A.M.
, SAMPE J. , 25 (1 ): 35 (1989 ).
27.Mach. Des. , 60 (5 ): 144 (1988 ).
28.
Pritchard G.
, and
Kandles S.J.
, 16th Reinforced Plast. Cong., Blackpool, UK , London, p. 73 (1988 ).
29.
Lhymn C.
, Adv. Polym. Technol. , 6 (2 ): 203 (1986 ).
30.
Lhymn C.
, Wear , 114 (2 ): 223 (1987 ).
31.
Lhymn C.
, ASLE Trans. , 30 (3 ): 324 (1987 ).
32.
Lhymn C.
, and
Lhymn I.O.
, Adv. Polym. , 8 (4 ): 417 (1988 ).
33.
Briscol D.J.
Wear , 108 (4 ): 357 (1986 ).
34.
UK Pat. Appl. 2136439A.
35.
Tanaka C.
, High Polym. Jap. , 38 (9 ): 890 (1989 ).
36.
Japanese Pat. Appl. 60–44551.
37.
Baeklund J.
, Rapp. Ingenjoersvetenskapsakal , (302): 103 (1986 ).
38.
Chi S.
Polymer , 29 (6 ): 1016 (1988 ).
39.
Guo Q.
Polym. Bull. , 29 (6 ): 517 (1988 ).
40.Plastverarbeiter , 38 (5 ): 46 (1987 ).
41.
Habcox N.L.
, and
Phillips D.C.
, Proc. 2nd Conf. Mater. Eng. , London, p. 139 (1985 ).
42.
Griffiths G.R.
Mater. – Pathway Future: 33rd Int. SAMPE Symp. and Exhib., Anaheim, CA , Covina, CA, p. 308 (1988 ).
43.
Cogswell F.N.
, 28th Nat. SAMPE Symp. and Exhib. , Anaheim, CA, Vol. 28 , Azusa, CA, p. 528 (1983 ).
44.
Dickson R.F.
J. Mater. Sci. , 20 (1 ): 60 (1985 ).
45.
Hartness J.T.
, and
Kim R.J.
, 28th Nat. SAMPE Symp, and Exhib. , Anaheim, CA, Vol. 28 , Azusa, CA, p. 535 (1983 ).
46.
West German Pat. Appl. 3425960.
47.
Cervenka A.
, Polym. Compos. , 9 (4 ): 263 (1988 ).
48.
Curtis D.C.
Composites , 19 (6 ): 446 (1988 ).
49.
Jaconis J.M.
, Adv. Mater. Technol., 32nd Int. SAMPE Symp. and Exhib., Anaheim, CA , Covina, CA, p. 104 (1987 ).
50.
Majidi A.P.
19th Int. SAMPE Technol. Conf. , Crystal City, Arlington, VA, Vol. 19 , Covina, CA, p. 576 (1987 ).
51.
Grove S.M.
, and
Short D.
, Plast. Rubb. Proc. Appl. , 10 (1 ): 34 (1988 ).
52.
Elsenussi A.K.
, Composites , 20 (3 ): 249 (1989 ).
53.
West German Pat. Appl. 3702929.
54.
Adaleman R.L.
13th Reinforced Plast. Cong., Brighton, UK , London, p. 71 (1982 ).
55.
Isikava T.
J. Soc. Compos. Mater. , 12 (1 ): 8 (1986 ).
56.
Dreumel W.H.M.
, Composites , 26 (3 ): 132 (1986 ).
57.
Barnes J.A.
, and
Cogswell F.N.
, SAMPE Q. , 20 (3 ): 22 (1989 ).
58.
Lee R.J.
, Composites , 18 (1 ): 35 (1987 ).
59.
Morton J.
, and
Godwin E.W.
, Compos. Struct. , 13 (1 ): 1 (1989 ).
60.
Chan C.-M.
, and
Venkatraman S.
, Polym. Sci., Polym. Phys. , B25 (8 ): 1665 (1987 ).
61.
Venkatraman S.
, and
Chan C.-M.
, Am. Chem. Soc. Polym. Preps , 27 (1 ): 305 (1986 ).
62.
Chan C.-M.
, and
Venkatraman S.
, J. Appl. Polym. Sci. , 32 (7 ): 5933 (1986 ).
63.
Chang I.I.
, Mater. – Pathway Future: 33rd Int. SAMPE Symp. and Exhib., Anaheim CA , Covina, CA, p. 194 (1988 ).
64.
Adamenko N.A.
An investigation of the effect of filler on the thermomechanical properties of polyether ether ketone . Izv. Volgogradsk. Gos. Tekh. Univ. , 4 (4 ) (2010 ).