Technology has been developed for polycondensation combination of the main components of polymer matrix composites, a special feature of which is the combination of the process of phenol formaldehyde oligomer synthesis with reinforcement of the oligomer with basalt strands. An advantage of the developed technology is the increased strength and physicochemical characteristics of the basalt-filled plastics.
FederyaevaV.S., Comparison of the properties of catalysts based on silica and basalt fibres in reactions of extensive oxidation of carbon monoxide and methane. Khim. Volokna, (5): 21–29 (2013).
2.
TrostyanskayaE.B., The properties of pheno-and imidobasalt-filled plastics. Plast. Massy, (1): 28–29 (1987).
3.
IgoninN.G., and TatarintsevaO.S., Investigation of the diffusion of moisture in basalt-filled plastic on an epoxy binder. Plast. Massy, (11): 37–39 (2006).
4.
Simonov-Emel'yanovI.D., An investigation of the process of curing basalt-filled plastic based on a phenol formaldehyde binder. Plast. Massy, (5): 23–27 (2009).
5.
Simonov-Emel'yanovI.D., An investigation of the process of impregnation of basalt fibre filler by phenol formaldehyde binder. Plast. Massy, (6): 32–36 (2009).
6.
Simonov-Emel'yanovI.D., The effect of high-temperature treatment on the properties of reinforced basalt-filled plastics based on epoxy, polyester, and modified phenol formaldehyde binders. Plast. Massy, (4): 22–25 (2007).
7.
AleksandrovV.A., An investigation of the structural features and service properties of a cation-exchange polymer composite material based on modified basalt fibres. Izv. VUZ Khim. Khim. Tekhnol., 54(1): 51–53 (2011).
8.
TrostyanskayaE.B., Phenolic plastics of frictional designation, inInnovations in the Production and Application of Phenolic and Aminoplastics: Seminar Papers, Moscow, pp. 82–84(1989).
9.
YurchenkoN.A., New epoxy composite materials reinforced with basalt fibres. Abstracts of Papers of Scientific and Technical Conference ‘Composite Materials in Structures of Deep-Water Technical Facilities, Nikolaev, pp. 49–50 (1991).
10.
ArtemenkoS.E., Russian Patent 2276676, MPK C 08 J5/04, C 08 L61/10, C 08 K7/02, Method for producing a polymer moulding composite. Saratov State Technical University, No. 2004135971/04, appl. 08.12.2004, publ. 20.05.2006.
