HimmerT., TechtelA., NowotnyS., BeyerE., Metal laminated tooling – a quick and flexible tooling concept, Proceedings of the SFF Symposium, Austin (Texas, USA), 2004.
5.
WalczykD., YooS., Design and fabrication of a laminated thermoforming tool with enhanced features, Journal of Manufacturing Processes, 11 (2009) 8–18.
6.
SantosE., ShiomiM., OsakadaK., LaouiT., Rapid manufacturing of metal components by laser forming, International Journal of Machine Tools & Manufacture, 46 (2006) 1459–1468.
7.
XuX., SachsE., AllenS., The design of conformal cooling channels in injection molding tooling, Polymer Engineering and Science, 41/7 (2001) 1265–1279.
8.
DimlaD., CamilottoM., MianiF., Design and optimisation of conformal cooling channels in injection molding tools, Journal of Material Processing Technology164-165 (2005) 1294–1300.
9.
LiX.-P., ZaoG.-Q., GuanY.-J., MaM.-X., Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm, Materials and Design, 30 (2009) 4317–4323.
WangG., ZhaoG., LiH., GuanY., Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization, Expert Systems with Applications, 38 (2011) 6705–6719.
12.
SarkarA., NitinN., KarwM., SinghR., Fluid flow and heat transfer in air jet impingement in food processing, Journal of Food Science, 69/4 (2004) 113–122.
YangY.-T., WeiT.-C., WangY.-H., Numerical study of turbulent slot jet impingement cooling on a semi-circular concave surface, International Journal of Heat and Mass Transfer, 54 (2011) 482–489.
HartmannW.(Promeos GmbH, Erlangen), Personal communication, 2010.
20.
BürkleE., BurrA., MüllerA., KüblerM., In three seconds from 100 to 140 degree, Kunststoffe International, 10 (2007) 144–148.
21.
SchmidtF., MaoultY. L., MonteixS., Modelling of infrared heating of thermoplastic sheet used in thermoforming process, Journal of Materials Processing Technology143-144 (2003) 225–231.
22.
ChangP., HwangS.-J., Experimental investigation of infrared rapid surface heating for injection molding, Journal of Applied Polymer Science, 102 (2006) 3704–3713.
23.
ChangP., HwangS.-J., Simulation of infrared rapid surface heating for injection molding, International Journal of Heat and Mass Transfer, 49 (2006) 3846–3854.
24.
YuM.-C., YoungW.-B., HsuP.-M., Microinjection molding with the infrared assisted mold heating system, Materials Science and Engineering A460-461 (2007) 288–295.
FavennecY., LabbeV., BayF., Induction heating processes optimization a general optimal control approach, Journal of Computational Physics, 187 (2003) 68–94.
29.
BurrA., MüllerA., KüblerM., Blitzheizungswerkstoff HTDM revolutioniert die Werkzeugtemperierung und beheizbare Werkzeugelemente, Technical Report, Kunststoff-Center an der Hochschule Heilbronn, 2007.
30.
ChenS.-C., PengH.-S., ChangJ.-A., JongW.-R., Simulations and verifications of induction heating on a mold plate, International Communications in Heat and Mass Transfer, 31/7 (2004) 971–980.
31.
ChenS.-C., JongW.-R., ChangJ.-A., Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line, Journal of Applied Polymer Science, 101 (2006) 1174–1180.
32.
ChenS.-C., JongW.-R., ChangY.-J., ChangJ.-A., CinJ.-C., Rapid mold temperature variation for assisting the micro injection of high aspect ratio micro-feature parts using induction heating technology, Journal of Micromechanics and Microengineering, 16 (2006) 1783–1791.
33.
HuangM.-S., TaiN.-S., Experimental rapid surface heating by induction for micro-injection molding of light-guided plates, Journal of Applied Polymer Science, 113 (2009) 1345–1354.
34.
HuangM.-S., HuangY.-L., Effect of multi-layered induction coils on efficiency and uniformity of surface heating, International Journal of Heat and Mass Transfer, 53 (2010) 2414–2423.
35.
OkmanO., DursunkayaZ., TekkayaA., Generalized transient temperature behavior in induction heated workpieces, Journal of Materials Processing Technology, 209 (2009) 5932–5939.
ZhaoG., LiX., GuanY., Multi-objective optimization of the heating rods layout for rapid electrical heating cycle injection mold, Journal of Mechanical Design, Transactions of the ASME, 132 (2010) 0610011–0610018.
38.
WangG., ZhaoG., GuanY., Research on optimum heating system design for rapid thermal response mold with electric heating based on response surface methodology and particle swarm optimization, Journal of Applied Polymer Science, 119 (2011) 902–921.
