Specifics of Controlling the Mechanical Properties of Reinforced Thermoplastics

Offringa A.R. , Thermoplastic composites – rapid processing applications. Composites: Part A, 27A, 1996, pp. 329–336.

Trostyanskaya E.B. , Trends in the application and development of composite materials in the aircraft industry. Aviatsionnaya Promyshlennost', No. 2, 2002, pp. 18–22.

Mikhailin Yu.A. , New thermoplastic composites for the interiors of motor vehicles. Polimernye Materialy, No. 10, 2006, pp. 14–21.

Korten H.T. , Failure of Reinforced Plastics. Khimiya, Moscow, 1967, 166 pp. (trans. from English, ed. by Yu.M. Tarnopol'skii).

Rabinovich A.L. , Introduction to the Mechanics of Reinforced Polymers. Nauka, Moscow, 1970, 482 pp.

Golovkin G.S. , Development of continuously reinforced plastics with specified properties, in M.L. Kerber et al., Polymer Composites: Structure, Properties, Technology. Textbook, ed. by Berlin A.A. Professiya, St Petersburg, 2008, pp. 239–313.

Golovkin G.S. , and Dmitrenko V.P. , Scientific Principles of Production of Articles from Thermoplastic Composite Materials. Rusaki, Moscow, 2005, 472 pp.

Gorbatkina Yu. A. , Physicochemical processes at the matrix/filler interface, in M.L. Kerber et al., Polymer Composites: Structure, Properties, Technology. Textbook, ed. by Berlin A.A. Professiya, St Petersburg, 2008, pp. 160–221.

Smirnov Yu.N. , Effect of surface treatment of the reinforcing glass fabric on the properties of glass-fibre-reinforced plastics based on a thermoplastic matrix. II. Non-polar polyethylene matrix. Plast. Massy, No. 12, 2002, pp. 28–32.

Trostyanskaya E.B. , Role of dressing agents in the organisation of boundary layers, in Reinforced Plastics, ed. by Golovkin G.S. MAI, Moscow, 1997, pp. 65–91.

Smirnov Yu.N. , Effect of surface treatment of the reinforcing glass fabric on the properties of glass-fibre-reinforced plastics based on a thermoplastic matrix. IV. Radiation treatment. Plast. Massy, No. 9, 2004, pp. 8–11.

Golovkin G.S. , Fibre Technology for the Processing of Thermoplastic Composite Materials, ed. by Golovkin G.S. MAI, Moscow, 1993, 232 pp.

Bunakov V.A. , Reinforced Plastics, ed. by Golovkin G.S. , and Semenov V.I. MAI, Moscow, 1997, 404 pp.

Golovkin G.S. , Design of Processes for the Manufacture of Articles from Polymeric Materials. Khimiya, Moscow, 2007, pp. 382–383.

Nelson W.E. , Technology of Plastics Based on Polyamides. Khimiya, Moscow, 1979, 256 pp. (trans. from English, ed. by A. Ya. Malkin).

Mashinskaya G.P. , Organic-Fibre-Filled Plastics, ed. by Golovkin G.S. , and Semenov V.I. MAI, Moscow, 1997, pp. 268–305.

Babaevskii P.G. , Thermoplastic polymers, in Thermoplastics of Structural Designation, ed. by Trostyanskaya E.B. Khimiya, Moscow, 1975, pp. 7–82.

Vinogradov V.M. , Residual stresses in thermoplastic articles, in Thermoplastics of Structural Designation, ed. by Trostyanskaya E.B. Khimiya, Moscow, 1975.

Vlasov S.V. , and Markov A.V. , Orientation processes in the production of articles of theroplastic polymeric materials. Polimernye Materialy, Nos 10 and 12, 2007; Nos 3, 4, 6, and 7, 2008.

Vinogradov V.M. , Residual stresses in articles of composite materials, in Plastics of Structural Designation (Thermosetting Plastics), ed. by Trostyanskaya E.B. Khimiya, Moscow, 1974, pp. 46–74.

Vinogradov V.M. , Processing stresses and methods for controlling them, in M.L. Kerber et al., Polymer Composites: Structure, Properties, Technology. Textbook, ed. by Berlin A.A. Professiya, St Petersburg, 2008, pp. 532–543.

Vasil'ev V.V. , Composite materials with thermoplastic matrices, in Non-metallic Structural Materials. Vol. II-4. Encyclopaedia “Engineering”, ed. by Kul'kov . Mashinostroenie, Moscow, 2005, pp. 119–121.