The Effect of the Angle of the Granulator Knife Edge on the Efficiency of the Extrusion Process of Granulated Polyethylene

Sikora R. , “Machining of high-molecular plastics”, Wydawnioctwo Edukacyjne, Warsaw 1996, pp. 168, 206 – 220.

Dominik M. , Kunststoffe, 87, 1997, p.1438.

Schalles H. , Kunststoffe, 87, 1997, p.1660.

Bielinski M. , “Fundamentals and studies of the suitability of recycled thermoplastics for selected conversion processes”, Wyd. Uczelniane ATR, Bydgoszcz 1992.

Bielinski M. , “Material and processing characteristics of selected recycled thermoplastics”, Wyd. Uczelniane ATR, Bydgoszcz 1998.

Konieczka R. , “Bases of mechanical processes of recycling of films from low-density polyethylene”, Wyd. Uczelniane ATR, Bydgoszcz 1996.

Kuehlborn D. , Kunststoffe, 91, 2001, p.58.

Information and catalogues from Hans Weber Maschinenfabrik GmbH.

Anon., Plast. Techn., 47, 2001, p.33.

Gottberg J.P. , Kunststofftechnik, 9, 1970, p.419.

Marwick J. , Kunststoffe, 88, 1998, p.2234.

Series of articles “Granulation of thermoplastics”, VDI-Verlag GmbH, Dusseldorf 1974.

Sikora J.W. , Polimery, 43, 1998, p.548.

Sikora J.W. , “Study of the autothermal nature of extrusion and a grooved extruder zone”, Lublin Polytechnic, 2000, pp. 126 and 152–160.

Information and cataligues from the Borealis company.

Technical documentation of the experimental extruder W-25D, OBR Metalchem in Torun, Torun 1994.

Sikora R. and Masztaleruk P. , Polimery, 37, 1992, p.421.