Thermodynamic Equations of State of Polymers and Conversion Processing

Sikora R. “Fundamentals of processing of high-molecular plastics”, Lublin Polytechnic, 1992, p. 83.

Szarawara J. , “Applied chemical thermodynamics”, WNR, Warsaw 1997, p. 71.

Haupt T. , “Fundamentals of thermodynamics”, Krakow 1980, p. 13.

Kalinowski E. , “Thermodynamics”, Wroclaw Poolytechnic, Wroclaw 1994, p. 113.

Madejski J. , “Engineering thermodynamics”, Rzeszow Polytechnic, 2000, p. 101.

Smorawinski A. , “Injection moulding technology”, WNT, Warsaw 1984, p. 224.

Johannaber F. , “Plastic machine guide”, Carl Hanser Verlag, Munich-Vienna 1992, p. 156; F. Johannaber, “Injection moulding machines – a user's guide”, Warsaw 2000, p. 183.

Lackowski B. , Mechanik, 55, 1982, p.479.

Zawistowski H. , Reports from the National Technical Conference “Injection moulding and extrusion technology”, Czestochowa, 1988, p. 5.

“Ideas for processing optimisation”, Battenfeld, p. 90.

Zawistowski H. , Mechanik, 63, 1990, p.213.

Rheinfeld D. and Jensen R. , Kunststoffe, 65, 1975, p.448.

Knappe W. and Lampl A. , Kunststoffe, 74, 1984, p.79.

Friedrichs B. , Kunststoffe, 80, 1990, p.583.

Tucker L.C. , “Fundamentals of computer modeling for polymer processing”, Carl Hanser Verlag, Munich-Vienna-New York 1989, p. 34.

Simha R. and Somcynski T. , Macromolecules, 2, 1969, p.342.

Lennard-Jones J.E. and Devonshire A.F. , Proc. Roy. Soc., A163, 1937, p. 53.

McKinney J.E. and Simha R. , J. Res., 81, 1977, p.283.

Simha R. , Kolloid-Zeitschrift und Zeitschrift fur Polymere, 251, 1973, p.402.

Zoller P. , J. Appl. Polym. Sci., 23, 1979, p.1051.

Zoller P. , J. Appl. Polym. Sci., 22, 1978, p.633.

Sanchez I.C. and Lacombe R.H. , Polym. Lett. Ed., 15, 1977, p.71.

Hartmann B. and Haque A.M. , J.Appl. Polym. Sci., 30, 1985, p.1553.

Rao K. and Griskey R.G. , J. Appl. Polym. Sci., 17, 1973, p.3293.

Spencer R.S. and Gilmore G.D. , J. Appl. Phys., 20, 1949, p.502.

Bernhardt (Ed.) E. , “Processing of thermoplastics materials”, Reinhold, New York 1959.

Guo X. , Polym. Engng Sci., 39, 1999, p.2096.

Sikora J.W. and Kowalska B. , Archiwum nauki o materialach, 19, 1998, p.115.

Bociaga E. and Samujlo B. , “The influence of constructional solutions of the injection moulding runner system on the thermal equation of state of polyethylene”, Polymer Processing Society, Europe/Africa Regional Meeting, Zlin, Czech Republic 2000, p. 215.

Bociaga E. and Samujlo B. , Archiwum nauki o materialach (in the press).

Kowalska B. , “The influence of aluminium hydroxide on the form of Spencer and Gilmore thermodynamic equation of state for polymers”, Polymer Processing Society, 15^th Annual Meeting, ‘s-Hertogenbosch, Holland 1999, p. 145.

Sikora R. , “Speed of the screw and thermal equation of state of autothermally extruded polyethylene”: the Polymer Processing Society, 14^th Annual Meeting, Yokohama, Japan 1998, p. 333.