Abstract
Introduction
Interface pressure measuring devices are used to assess the pressures exerted by compression. Their performance, however, has not been considered as a contributing factor to reported inconsistences in the application of compression. A systematic review was undertaken to investigate the performance of commercially available devices used to measure interface pressure.
Methods
Six databases were searched identifying 17 devices, grouped into five sensor categories.
Results
A range of methodologies assessed the devices’ accuracy and precision, including method of pressure application, device calibration and type of surface used. No sensor category outperformed the others, however some individual sensors showed higher accuracy and/or precision compared to others. Two major factors influenced the performance of a number of sensors: the amount of applied pressure and the calibration method used.
Conclusion
Inconsistences in the application of compression may reflect, in part, issues related to accuracy and precision of the devices used to assess compression.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
