In this study, aluminum alloy 7075-T651 plates were welded using conventional variable polarity gas tungsten arc welding (VP-GTAW) and variable polarity GTAW with a pulse-current wave-coupled mode (CPVP-GTAW). In CPVP-GTAW, pulse frequencies of 1–2 Hz and duty ratios of 33–67% were applied while maintaining comparable heat input to that of VP-GTAW. A combination of optical microscopy, EPMA, EBSD, fish-bone crack testing, and localized electrochemical impedance spectroscopy was employed to systematically characterize microstructural evolution, solidification cracking susceptibility, and micro-electrochemical behavior. The coupled pulse waveform generated a periodically reheated mushy zone at the trailing edge of the weld pool, where the temperature was estimated to reach 476–632 °C within the semi-solid range. As a result, the solidification cracking susceptibility index decreased from 91 in VP-GTAW welds to 27 in optimized CPVP-GTAW welds. In addition, localized electrochemical impedance spectroscopy revealed a significantly reduced micro-scale impedance inhomogeneity in CPVP-GTAW welds, indicating improved local electrochemical stability. These results demonstrate that CPVP-GTAW effectively suppresses micro-segregation, mitigates solidification cracking, and homogenizes micro-electrochemical properties in 7075 aluminum alloy welds.
OmiyaleBOOlugbadeTOAbioyeTE, et al.Wire arc additive manufacturing of aluminium alloys for aerospace and automotive applications: A review. Materials Science and Technology2022; 38(7): 391–408. doi:10.1080/02670836.2022.2045549
2.
GaminYAkopyanTKinT, et al.Effect of radial-shear rolling on particle's morphology and mechanical properties of AA7075 alloy. Materials Science and Technology2023; 39(15): 2205–2216. doi:10.1080/02670836.2023.2196471
3.
Srinivasa RaoKPrasad RaoK. Fusion zone of AA6061 alloy GTA welds: electrochemical polarisation and impedance study. Materials Science and Technology2013; 21(9): 1003–1009. doi:10.1179/174328405X51730
4.
SongGWangZLiuZ, et al.Effect of partial rolling on the microstructure and mechanical properties of laser-TIG hybrid welded joints of 7075-T6 aluminum alloy. Int J Adv Manuf Technol2022; 121: 589–599. https://doi.org/10.1007/s00170-022-09287-w
5.
ConiglioNCrossCE. Effect of weld travel speed on solidification cracking behavior. Part 1: weld metal characteristics. Int J Adv Manuf Technol2020; 107: 5011–5023. https://doi.org/10.1007/s00170-020-05231-y
6.
ConiglioNCrossCE. Effect of weld travel speed on solidification cracking behavior. Part 2: testing conditions and metrics. Int J Adv Manuf Technol2020; 107: 5025–5038. https://doi.org/10.1007/s00170-020-05232-x
7.
JiangX-PYuWWeiY, et al.Tailoring precipitation-strengthening in Ir-based ternary alloys: a first-principles approach to L12 phase engineering. Rare Metals2025; 44(11): 9036–9052. doi:10.1007/s12598-025-03543-0
8.
LiZOuLWangY, et al.Solidification Cracking Restraining Mechanism of Al-Cu-Mg-Zn Alloy Welds Using Cold Metal Transfer Technique. Materials2023; 16(2): 721. doi:10.3390/ma16020721
9.
PourgharibshahiMTimelliG. Surface-segregation mediated Mg2Si and Mg (Zn, Cu, Al)2 formation on primary α-Al phase during solidification of the hot-tear sensitive AA 7xxx aluminum alloys. Materials Today Communications2023; 36: 106803. doi:10.1016/j.mtcomm.2023.106803
10.
YinHWenKLiZ, et al.Effect of Zn-Mg ratio on the microstructure and mechanical properties of as-cast Al–Zn–Mg–Cu alloys. Journal of Materials Research and Technology2023; 26: 3646–3660. doi:10.1016/j.jmrt.2023.08.138
11.
WangWWuLLiZ, et al.Passivation, layered surface high-temperature oxidation, and mechanical behaviors in Al-doped cobalt-based dual-phase multi-principal element alloys. Applied Surface Science2026; 719. doi:10.1016/j.apsusc.2025.164930
12.
BirbilisNBuchheitRG. Electrochemical characteristics of intermetallic phases in aluminum alloys an experimental survey and discussion. Journal of the Electrochemical Society2005; 152(4): B140–B151. doi:10.1149/1.1869984
13.
ChenSYHuangCYLinCS. Microstructure inhomogeneity of the constituent particles of 7075-T6 aluminum alloy after alkaline cleaning and desmutting. Corrosion Science2021; 184(3): 109354. doi:10.1016/j.corsci.2021.109354
14.
ZhangGGuJShiH, et al.Microstructures and mechanical properties analysis of TiAl joints using novel brazing filler metal, Welding in the World. 2025.
15.
LiSDongHShiL, et al.Corrosion behavior and mechanical properties of Al-Zn-Mg aluminum alloy weld. Corrosion Science2017; 123: 243–255. doi:10.1016/j.corsci.2017.05.007
16.
ZhangMLiuSJiangJ, et al.Effect of Cu content on quenching sensitivity relative to exfoliation corrosion susceptibility of Al-Zn-Mg-(Cu) alloys. Materials Characterization2022; 194: 112476. doi:10.1016/j.matchar.2022.112476
17.
ZhangZLiDLiS, et al.Effect of post-heat treatment on the microstructure, mechanical, and corrosion properties of laser powder bed fused Al-Zn-Mg-Cu-Si-Zr-Er alloys. Journal of Materials Research and Technology2023; 27: 1350–1364. doi:10.1016/j.jmrt.2023.10.009
18.
MengXWangWXieY, et al.Microstructural modification and stress corrosion mechanisms of in-situ rolling friction stir welding joints. Materials Characterization2026; 231. doi:10.1016/j.matchar.2025.115884
19.
JiangLZhangZFuH, et al.Corrosion behavior and mechanism of Al–Zn–Mg–Cu alloy based on the characterization of the secondary phases. Materials Characterization2022; 189: 111974. doi:10.1016/j.matchar.2022.111974
20.
WangYLiHLiZ, et al.Refining microstructure of medium-thick AA2219 aluminium alloy welded joint by ultrasonic frequency double-pulsed arc. Journal of Materials Research and Technology2023; 23: 3048–3061. doi:10.1016/j.jmrt.2023.01.174
21.
WangYCongBQiB, et al.Influence of low-pulsed frequency on arc profile and weld formation characteristics in double-pulsed VPTIG welding of aluminium alloys. Journal of Manufacturing Processes2020; 58: 1211–1220. doi:10.1016/j.jmapro.2020.09.025
22.
KuangXQiBZhengH. Effect of pulse mode and frequency on microstructure and properties of 2219 aluminum alloy by ultrahigh-frequency pulse Metal-Inert Gas Welding. Journal of Materials Research and Technology2022; 20: 3391–3407. doi:10.1016/j.jmrt.2022.08.094
23.
ZhangCZhaoYLiuD, et al.Effect of pulsed laser frequency on microstructure and mechanical properties of 2219 aluminum alloy welded joints. Optics & Laser Technology2023; 158: 108876. doi:10.1016/j.optlastec.2022.108876
24.
WangJChenXYangL, et al.Sequentially combined thermo-mechanical and mechanical simulation of double-pulse MIG welding of 6061-T6 aluminum alloy sheets. Journal of Manufacturing Processes2022; 77: 616–631. doi:10.1016/j.jmapro.2022.03.046
25.
ZhangZYangZWangC, et al.Accelerating ultrashort pulse laser micromachining process comprehensive optimization using a machine learning cycle design strategy integrated with a physical model. Journal of Intelligent Manufacturing2024; 35(1): 449–465. doi:10.1007/s10845-022-02058-0
26.
YuanTLuoZKouS. Grain refining of magnesium welds by arc oscillation. Acta Materialia2016; 116: 166–176. doi:10.1016/j.actamat.2016.06.036
27.
MaoFGuoJLLiuSH, et al.Spheroidization mechanism of primary silicon in hypereutectic Al–Si alloys with Eu addition. Rare Metals2025; 44(10): 7940–7955. doi:10.1007/s12598-025-03504-7
28.
Madhan KumarA. The Utilization of Scanning Electrochemical Microscopic (SECM) Technique in Corrosion Monitoring. In: ToorIu (eds) Recent Developments in Analytical Techniques for Corrosion Research. Cham: Springer, 2022. https://doi.org/10.1007/978-3-030-89101-5_4.
29.
Da SilvaRMPIzquierdoJMilagreMX, et al.On the local corrosion behavior of coupled welded zones of the 2098-T351 Al-Cu-Li alloy produced by Friction Stir Welding (FSW): An amperometric and potentiometric microelectrochemical investigation[J]. Electrochimica Acta2021; 373(1): 137910. doi:10.1016/j.electacta.2021.137910
30.
A. Madhan Kumar, Ihsan-ul-Haq Toor. Localized corrosion evaluation of newly developed stainless-steel alloys in chloride medium through dynamic and localized micro electrochemical techniques. Journal of Materials Research and Technology2023; 26: 5668–5682. doi:10.1016/j.jmrt.2023.08.228
31.
SpencerPJ. A brief history of CALPHAD. Calphad2008; 32(1): 1–8. DOI: 10.1016/j.calphad.2007.10.001
32.
ZhangJGaoJYangS, et al.Breaking the strength-ductility trade-off in additively manufactured aluminum alloys through grain structure control by duplex nucleation. Journal of Materials Science & Technology2023; 152: 201–211. DOI: 10.1016/j.jmst.2022.12.030
33.
XiaY-JSongQYiB, et al.Improving out-of-distribution generalization for online weld expulsion inspection using physics-informed neural networks. Welding in the World2025; 69(5): 1309–1322. doi:10.1007/s40194-025-01950-6
34.
TateSBJavernickDALienertTJ, et al.Laser weldability of 21Cr-6Ni-9Mn stainless steel: Part I-Impurity effects and solidifcation mode. Welding Journal2016; 95: 371s–383s.
35.
TateSBJavernickDALienertTJ, et al.Laser weldability of 21Cr-6Ni-9Mn stainless steel: Part II-Weldability diagrams. Welding Journal2016; 95: 409s–418s.
36.
KouS. A criterion for cracking during solidification. Acta Materialia2015; 88: 366–374. doi:10.1016/j.actamat.2015.01.034
37.
KunLKouS. Susceptibility of magnesium alloys to solidification cracking. Science and Technology of Welding and Joining2020; 25(3): 251–257. doi:10.1080/13621718.2019.1681160
38.
XiaCKouS. Evaluating susceptibility of Ni-base alloys to solidification cracking by transverse-motion weldability test. Science and Technology of Welding and Joining2020; 25(8): 690–697. doi:10.1080/13621718.2020.1802897
39.
KouSLeY. Nucleation mechanisms and grain refining of weld metal. Welding Journal1986; 65: 305s–313s.
40.
LiuJDuarteHPKouS. Evidence of back diffusion reducing cracking during solidification. Acta Materialia2017; 122: 47–59. doi:10.1016/j.actamat.2016.09.037
41.
ZhangYLiHLiZ, et al.Quantitative analysis of the solute redistribution and precipitate of Al-Mg-Si series alloys resistance spot welds after post-weld heat treatment. Journal of Materials Research and Technology2021; 15: 5906–5919. doi:10.1016/j.jmrt.2021.11.063
42.
KouSLeY. Grain structure and solidification cracking in oscillated arc welds of 5052 aluminum alloy. Metallurgical Transactions A1985; 16: 1345–1352. https://doi.org/10.1007/BF02670338
43.
FlemingsMC. Coarsening in Solidification Processing. Materials Transactions2005; 46(5): 895–900. DOI:10.2320/matertrans.46.895
44.
BrodyHDFlemingsMC. Solute redistribution in dendritic solidification. Materials Transactions1966; 236: 615–623.
45.
FlemingsMCKattamisTZBarbaraB. Dendrite arm spacing in aluminum alloys. AFS Transactions1991; 99: 501–506.
46.
AnnavarapuSDohertyRD. Inhibited coarsening of solid-liquid microstructures in spray casting at high volume fractions of solid. Acta Metallurgica et Materialia1995; 43(8): 3207–3230. DOI:10.1016/0956-7151(94)00448-Q
47.
BiradarNSRamanR. Grain refinement in Al-Mg-Si alloy TIG welds using transverse mechanical arc oscillation. Journal of Materials Engineering and Performance2012; 21: 2495–2502. doi:10.1007/s11665-012-0207-2
48.
Janaki RamGDMurugesanRSundaresanS. Fusion zone grain refinement in aluminum alloy welds through magnetic arc oscillation and its effect on tensile behavior. Journal of Materials Engineering and Performance1999; 8: 513–520. doi:10.1007/s11665-999-0002-x
49.
Khalasi DezfuliMHeidary MoghadamAGhobeiti HasabMAshiriR. Effect of pulsed current frequency on alloy chemistry, microstructure, and mechanical responses of Hastelloy B-2 superalloy in gas tungsten arc welding process. Journal of Materials Research and Technology2025; 36: 6950–6968. doi:10.1016/j.jmrt.2025.04.293
50.
DezfuliMKMoghadamAHHasabMG, et al.Disclosing connection links between microstructure and mechanical performance in pulsating current gas tungsten arc welding of Hastelloy B-2 superalloy. Journal of Advanced Joining Processes2024; 10(2024, Article 100237. doi:10.1016/j.jajp.2024.100237
51.
DezfuliMKHasabMGMoghadamAH, et al.Study of Welding Metallurgy, Alloying Element Redistribution, and Alloy Solidification in Hastelloy B-2 Superalloy Under Pulsating Current Waveform Gas Tungsten Arc Welding. Metallurgical and Materials Transactions A2024; 55(8): 3092–3106. doi:10.1007/s11661-024-07460-2
