Titanium/steel clad plates were produced through vacuum hot rolling, employing varied surface treatments, assembly techniques, and heating temperatures. The study investigated the interfacial microstructure of different preparation methods, and six specimens were extracted from both the edge and central regions of each plate for shear testing to evaluate the interfacial bonding strength. Water belt machine-processed surfaces demonstrated excellent flatness without noticeable concavity or convexity, exhibited no obvious oxides, and achieved the highest interface bonding strength (239 MPa). The titanium/steel/titanium clad plates showed lower strength compared to those produced by the steel-titanium-titanium-steel method, interfacial oxides increased with temperature, reducing the bonding strength to 136 MPa at 950°C. In contrast, the steel-titanium-titanium-steel plates exhibited peak bonding strength of 266 MPa at 900°C.
ShiZCuiLHeD, et al.Effect of CuCrZr interlayer thickness on microstructure and mechanical properties of TC4/304 SS joint using CuCrZr/V composite layers. Weld World2025: 1–18. DOI: https://doi.org/10.1007/s40194-025-02011-8
2.
JungJHChoiJLeeB-S, et al.Improvement of mechanical properties of cast pure titanium by repeated heat treatment. Mater Sci Technol2019; 35: 248.
3.
FrancisJA. Titanium. Mater Sci Technol2019; 35: 247.
4.
PrasanthiTNSudhaRCSarojaS. Explosive cladding and post-weld heat treatment of mild steel and titanium. Mater Des2016; 93: 180.
5.
LiNWangBLiuT, et al.Revealing the coupling of multiple corrosion behaviors in the corrosion process of titanium-steel composites in marine environment. Corros Sci2024; 233: 112107. DOI: https://doi.org/10.1016/j.corsci.2024.112107
6.
GongYMaF-QXueY, et al.Failure analysis on leaked titanium tubes of seawater heat exchangers in recirculating cooling water system of coastal nuclear power plant. Eng Fail Anal2019; 101: 172.
7.
KayaYEserG. Production of ship steel—titanium bimetallic composites through explosive cladding. Weld World2019; 63: 1547.
8.
ZhouQLiuRZhouQ, et al.Microstructure characterization and tensile shear failure mechanism of the bonding interface of explosively welded titanium-steel composite. Mater Sci Eng: A2021; 820: 141559. DOI: https://doi.org/10.1016/j.msea.2021.141559
9.
ZhaoGTangQGuoQ, et al.Effect of annealing temperature on interfacial microstructure and tensile fracture behavior of titanium-steel clad plate. Mater Charact2024; 215: 114128. DOI: https://doi.org/10.1016/j.matchar.2024.114128
10.
HaJSHongSI. Deformation and fracture of Ti/439 stainless steel clad composite at intermediate temperatures. Mater Sci Eng: A2016; 651: 805.
11.
ZhaoZTangJTariqN, et al.Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling. Mater Sci Eng: A2020; 795: 139982. DOI: https://doi.org/10.1016/j.msea.2020.139982
12.
BaiY-LLiuX-F. Interfacial reaction behavior of titanium/steel composite plate formed by cold-hot rolling. Mater Charact2023; 202: 113030. DOI: https://doi.org/10.1016/j.matchar.2023.113030
13.
WachowskiMGlocMŚlęzakT, et al.The effect of heat treatment on the microstructure and properties of explosively welded Titanium-steel plates. J Mater Eng Perform2017; 26: 945.
14.
ChenXXiaoHShaoP, et al.Microstructure Evolution and Deformation Behavior of High Strength Titanium Clad Steel Plate in the Thermal Compression. Steel Res Int2024; 95: 2300834. DOI: https://doi.org/10.1002/srin.202300834
15.
ZhangMYan, et al.Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding. Mater Sci Eng A Struct Mater Propert Misrostruct Process2017; 689: 323–331.
16.
YangXShiC-gGeY-h, et al.Comparison of microstructure and mechanical properties of titanium/steel composite plates by two manufacturing processes. J Iron Steel Res Int2018; 25: 347.
17.
LiY-WLiuH-TWangZ-J, et al.Suppression of edge cracking and improvement of ductility in high borated stainless steel composite plate fabricated by hot-roll-bonding. Mater Sci Eng: A2018; 731: 377.
18.
VelmuruganCSenthilkumarVSaralaS, et al.Low temperature diffusion bonding of Ti-6Al-4V and duplex stainless steel. J Mater Process Tech2016; 234: 272.
19.
MoD-fSongT-fFangY-j, et al.A Review on Diffusion Bonding between Titanium Alloys and Stainless Steels. Adv Mater Sci Eng2018; 2018: 8701890. DOI: https://doi.org/10.1155/2018/8701890
20.
PanXJiangJWanT, et al.Effect of high-temperature normalizing heat treatment on interfacial microstructure and mechanical properties of rolled Titanium steel composite plate. J Mater Eng Perform2023; 33: 5517.
21.
SuHLuoX-bChaiF, et al.Manufacturing technology and application trends of Titanium clad steel plates. J Iron Steel Res Int2015; 22: 977.
22.
ZhaoJ-xLuoZ-aWangM-k, et al.Microstructure and mechanical property of titanium steel by vacuum roll-cladding with interlayer. Mater Sci Technol2022; 38: 824.
23.
BiZ-xLiX-jYangK, et al.Experimental and numerical studies of titanium foil/steel explosively welded clad plate. Def Technol2023; 25: 192.
24.
LiXBiZWangQ, et al.Influence of copper foil interlayer on microstructure and bonding properties of titanium-steel explosive welded composite plate. Mater Today Commun2023; 34: 105143. DOI: https://doi.org/10.1016/j.mtcomm.2022.105143
25.
XieG-mYangD-hLuoZ-a, et al.The Determining Role of Nb Interlayer on Interfacial Microstructure and Mechanical Properties of Ti/Steel Clad Plate by Vacuum Rolling Cladding. Materials2018; 11: 1983. DOI: https://doi.org/10.3390/ma11101983
26.
BaeDSChaeYRLeeSP, et al.Effect of post heat treatment on bonding interfaces in Ti/Mild steel/Ti Clad materials. Procedia Eng2011; 10: 996.
27.
KunduSChatterjeeS. Effects of temperature on interface microstructure and strength properties of titanium–niobium stainless steel diffusion bonded joints. Mater Sci Technol2011; 27: 1177.
28.
WangGLLuoZAXieGM, et al.Experiment research on impact of total rolling reduction ratio on the properties of vacuum rolling-bonding ultra-thick steel plate. Adv Mater Res2011; 299-300: 962.
29.
YangD-hLuoZ-aXieG-m, et al.Interfacial microstructure and properties of a vacuum roll-cladding titanium-steel clad plate with a nickel interlayer. Mater Sci Eng: A2019; 753: 49.
30.
YangD-hLuoZ-aXieG-m, et al.Effect of interfacial compounds on mechanical properties of titanium–steel vacuum roll-cladding plates. Mater Sci Technol2018; 34: 1700.
31.
GaoXLiuWFanQ, et al.Effect of Ta/Ni dual-interlayer on the microstructure and properties of high strength titanium alloy and steel composite plate. Vacuum2024; 230: 113569. DOI: https://doi.org/10.1016/j.vacuum.2024.113569
32.
LuoZWangGXieG, et al.Interfacial microstructure and properties of a vacuum hot roll-bonded titanium-stainless steel clad plate with a niobium interlayer. Acta Metallurgica Sinica (English Letters)2013; 26: 754.
33.
WeiZHuangPGaoQ, et al.Influence of continuous annealing on the interfacial compound evolution and mechanical behavior of hot-rolled titanium/steel composite plates. Mater Des2025; 253: 113818. DOI: https://doi.org/10.1016/j.matdes.2025.113818
34.
WuYWangTRenZ, et al.Evolution mechanism of microstructure and bond strength based on interface diffusion and IMCs of Ti/steel clad plates fabricated by double-layered hot rolling. J Mater Process Technol2022; 310: 117780. DOI: https://doi.org/10.1016/j.jmatprotec.2022.117780
35.
ChaiX-yPanTChaiF, et al.Interlayer engineering for titanium clad steel by hot roll bonding. J Iron Steel Res Int2018; 25: 739.
36.
YangD-hLuoZ-aXieG-m, et al.Effect of vacuum level on microstructure and mechanical properties of titanium–steel vacuum roll clad plates. J Iron Steel Res Int2018; 25: 72.
37.
WangFRGuoSWangYQ, et al.Effect of Nb interlayer on microstructure and property of Ti-6Al-4V/690MPa grade steel clad plate by vacuum rolling. Mater Sci Eng: A2023; 882: 145450. DOI: https://doi.org/10.1016/j.msea.2023.145450
38.
JianSLiuKLiJ, et al.Effect of interlayer on interfacial microstructure and properties of Ni80Cr20/TC4 vacuum diffusion bonded joint. Vacuum2023; 208: 111738. DOI: https://doi.org/10.1016/j.vacuum.2022.111738
39.
XiaoHLiuWDaiQ, et al.Improving mechanical properties of dissimilar TA3/L907A steel clad plates with multiple interlayers via hot-compression bonding. J Mater Res Technol2025; 36: 111.
40.
LiBXChenZJHeWJ, et al.Effect of interlayer material and rolling temperature on microstructures and mechanical properties of titanium/steel clad plates. Mater Sci Eng: A2019; 749: 241.
41.
DuJWangYLuY, et al.High bonding strength of Ti /steel clad plates prepared by a developed electromagnetic induction heating followed by rolling. J Manuf Processes2024; 124: 650.
42.
YuCFuLXiaoH, et al.Effect of carbon content on the microstructure and bonding properties of hot-rolling pure titanium clad carbon steel plates. Mater Sci Eng: A2021; 820: 141572. DOI: https://doi.org/10.1016/j.msea.2021.141572
43.
ChenWChenLPanX, et al.Effect of hot rolling thinning temperature on the interfacial microstructure and mechanical properties of titanium/steel composite plates. J Mater Sci2025; 60: 5232–5246. DOI: https://doi.org/10.1007/s10853-025-10756-2
44.
MomonoTEnjoTIkeuchiK. Effects of carbon content on the diffusion bonding of iron and steel to titanium. Isij Int1990; 30: 978.
45.
XiaCJinZ. On the evolution of microstructure and diffusion paths in the titanium-steel explosion weld interface during heat treatment. J Less Common Metals1990; 162: 315.
46.
ChaiX-yChenGChaiF, et al.Hot roll bonding between commercially pure titanium and high-strength low-alloy steel using Fe interlayer. J Iron Steel Res Int2019; 26: 1126.
