In this article, a multi-objective optimization is presented to find optimal cable adjustment for statically indeterminate cable structures. Combining a constrained least-square method and the non-dominated sorting genetic algorithm II, a trade-off curve of potential solutions is generated from which a final set of cable adjustments can be chosen by the designer. Optimal solutions are measured against solutions found by a trial-and-error method on the George C. King Bridge case study. Results show that the proposed strategy can successfully find adjustments that significantly reduce overall tension errors, with fewer cables involved.
Royer-de-VericourtRBlasselJFPfadlerA. Réglage de la précontrainte du contreventement de la verrière de la gare de Strasbourg. Constr Mét2010; 47(4): 3–25.
2.
FujisawaNTomoH. Computer-aided cable adjustement of stayed bridge. In: IABSE Periodica. Zurich, Switzerland: IABSE, 1985, Vol 4, pp. 181–190.
3.
JungKLeeHS.Development of geometry control system for cable stayed bridge and application to the Incheon Bridge. In: FrngopolDSauseRKuskoC (eds) Bridge maintenance, safety, management and life-cycle optimization. Pennsylvania, USA: CRC Press, 2008, pp. 3431–3438.
4.
ZhouZZhangZYuY.Optimization method of hanger forces in reasonable finished state of diagonal-span arch bridge. Int J Adv Comput Sci Tech2012; 4(11): 294–303.
5.
HassanMMNassefAOEl DamattyAA.Determination of optimum post-tensioning cable forces of cable-stayed bridges. Eng Struct2012; 44: 248–259.
6.
BoydSVandenbergheL.Convex optimization. Cambridge: Cambridge University Press, 2004.
7.
DebK.A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE T Evolut Comput2002; 6(2): 182–197.
BlasselJFMcDonaghMGarciaDet al. Design of the St. Patrick’s Bridge in Calgary, Canada, In : Jornadas Internacionales de Investigación en Construcción. Hitos Estructurales de la Arquitectura y la Ingeniería - Instituto de Ciencias de la Construcción “Eduardo Torroja”,
CSIC, Madrid, 2011.
