Abstract
Ultrasonic measurement of the rectus femoris (RF) is a novel, proxy measure for muscle strength. The impact of hip flexion/head of bed positioning on RF cross-sectional area (CSA) has not been fully explored. This study describes and compares differences in RF CSA across four degrees of hip flexion. This repeated-measures, comparative study enrolled healthy, pre-menopausal women (n = 20). RF CSA of the dominant leg was measured using the SonoSite M-Turbo ultrasound system with the head of bed at 0°, 20°, 30°, and 60°. One-way repeated measures indicated significant differences in RF CSA, F(3, 17) = 14.18, p < .001, with variation in hip flexion/head of bed elevation and significant RF CSA differences between: (a) 0° and 20°, (b) 0° and 30°, (c) 0° and 60°, and (d) 20° and 60°. Standardizing patient positioning when conducting ultrasonic measurement of RF CSA is vital for researchers who assess muscle mass.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
