Sage Journals: Discover world-class research

Abstract

Energy efficient new and retrofit building construction relies heavily on the use of thermal insulation. A focus on the environmental performance of current construction materials with regards to both embodied energy and energy in-use has resulted in a growing interest in the use of natural fibre insulation materials. The results of heat flow meter thermal conductivity tests on a range of straw samples of different densities are presented. The innovative use of straw in the development of a prefabricated straw-bale panel and the results of guarded hot-box testing are presented. In common with most building materials, there is a degree of uncertainty in the thermal conductivity due to the influences of temperature, moisture content and density; however, from evaluation of a range of the literature and experimental data, a value of 0.064 W/m·K is proposed as a representative design value for straw bales at the densities used in building construction. Computer simulation and experimental testing suggest that the overall heat transfer coefficient (U-value) for the complete prefabricated panel is approximately 0.178 W/m²·K. This article also briefly discusses the use of this innovative unit in a highly instrumented test building constructed at the University of Bath.

Practical application : Knowledge of the thermal properties of building materials is necessary for evaluation of energy performance of the building envelope and appraisal of retrofit fabric improvements. The presentation of robust data for the thermal properties of straw will be of interest to designers developing projects employing this natural fibre insulation material.

Keywords

Natural fibre guarded hot box prefabricated heat transfer coefficient insulation materials

Get full access to this article

View all access options for this article.

References

Al-Homoud

. Performance characteristics and practical applications of common building thermal insulation materials. Build Environ 2005; 40(3): 353–366.

EC. Implementation of the energy performance of buildings directive country reports 2008. ISBN 2-930471-29-8, EAN 9782930471297, 2008. Brussels: European Commission, www.epbd-ca.eu (2008, accessed 5 February 2012).

Zhou

Zheng

. An environment-friendly thermal insulation material from cotton stalk fibers. Energy Build 2010; 42: 1070–1074.

Hills CAS, Norton AJ and Newman G. NFI – the importance of hygroscopicity in providing indoor climate control. In: Proceedings of the NOCMAT, Bath, UK, 6–9 September 2009.

Cripps

Handyside

Dewar

. Crops in construction, London: CIRIA, 2004.

Spink J, Street P, Sylvester-Bradley R, et al. The potential to increase productivity of wheat and oilseed rape in the UK. Report to the Government Chief Scientific Adviser, Professor John Beddington, January 2009.

Booth E, Walker R, Bell J, et al. Assessment of the potential impact on UK agriculture and the environment of meeting renewable feedstock demands. Report no. NNFCC 08-005, 2009. York: NNFCC.

Tsatsarelis

. Energy inputs and outputs for soft winter wheat production in Greece. Agric Ecosyst Environ 1993; 43(2): 109–118.

BS EN ISO 8990. Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hot box, London: British Standards Institution, 1996.

10.

ISO 8301. Thermal insulation. Determination of steady-state thermal resistance and related properties – heat flow meter apparatus, London: British Standards Institution, 1991.

11.

Beck

Heinemann

Reidinger

. Thermal transport in straw insulation. J Building Phys 2004; 27(3): 227–234.

12.

Fachverband Strohballenbau (FASBA). Thermal performance: strawbale building research development 2003–2009, Germany: FASBA, 2009.

13.

Ashour T. The use of renewable agricultural by-products as building materials. PhD Thesis, Zagazig University, Benha Branch, Egypt, 2003.

14.

Munch-Andersen J and Andersen BM. Halmhuse; Udformning og materialeegenskaber (Straw houses; Design and material properties). Statens Byggeforskningsinstitut/Danish Building and Urban Research, (By og Byg Resultater/City and Build Results 033), 2004.

15.

King

. Buildings of earth and straw: structural design for rammed earth and straw-bale architecture, Sausalito, CA: Ecological Design Press, 1996.

16.

McCabe J. The thermal insulating value of straw bale for construction. In: Proceedings of the national passive solar conference, Albuquerque, NM, 14–17 June 1998, vol. 23, pp.139–142. Boulder, CO: American Solar Energy Society.

17.

ASTM C-177-85. Standard test method for steady-state heat flux measurements and thermal transmission properties by means of the guarded hot plate apparatus. 1992 annual book of ASTM standards 1992; Vol. 04.06Philadelphia, PA: American Society for Testing and Materials, pp. 20–31.

18.

BS EN 12667. Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Products of high and medium thermal resistance, London: British Standards Institution, 2001.

19.

Quin S, Venuti G, De Ponte F, et al. Certification of a resin-bonded glass fibre board for thermal conductivity between −10℃ and +50℃. IRMM-440, Report no. EUR 19572, 2000. Brussels, Belgium: Directorate-General Joint Research Centre, European Commission.

20.

Wall K, Walker P, Gross C, et al. Development and testing of a prototype straw bale house. Proc Inst Civ Eng Constr Mater, http://dx.doi.org/10.1680/coma.11.00003 (accessed 1 January 2012).

21.

BBA (British Board of Agrément). Determination of the thermal transmittance (U-value) of a straw bale wall for University of Bath. British Board of Agrément Test Report no. 5742A, Unpublished, 2009. Hertfordshire: Department of Architecture and Civil Engineering, BBA.

22.

NBS for the Office of the Deputy Prime Minister. Building regulations: part L 2006 (Conservation of fuel and power). Approved Documents Part L1A (new dwellings), L2A (new buildings other than dwellings), 2006. London, UK: NBS for the Office of the Deputy Prime Minister.

23.

ATTMA. Technical standard 1. Measuring air permeability of building envelopes. Issue 2, 13 July 2007. Croydon: Air Tightness Testing and Measurement Association, http://www.attma.org (2007, accessed 6 October 2011).

24.

BS EN 13829. Thermal performance of buildings. Determination of air permeability of buildings. Fan pressurization method, London: British Standards Institution, 2001.

25.

Stone N. Thermal performance of straw bale wall systems. Ecological Building Network, www.ecobuildnetwork.org (2003, accessed 7 April 2011).

26.

Centre d'Expertise du Bâtiment et des Travaux Publics. Utilisation de la Paille en Parois de Maison Individuelles à Ossaure Bois (Use of straw for walling of detached timber framed houses), 2004. Lyon: Centre d'Expertise du Bâtiment et des Travaux Publics.

27.

Watts K, Wilkie K, Thompson K, et al. Thermal and mechanical properties of straw bales as they relate to a straw house. In: Proceedings of the agricultural institute of Canada annual conference, Ottawa, Ontario, 9–12 July 1995, pp.95–209. Ottawa: Agricultural Institute of Canada.

28.

Lawrence M, Heath A and Walker P. ModCell: an innovative straw bale building system. Unpublished, University of Bath, UK, 2009.

29.

BS EN ISO 6946. Building components and building elements – thermal resistance and thermal transmittance – calculation method, London: British Standards Institution, 2007.

Evaluation of the thermal performance of an innovative prefabricated natural plant fibre building system

Abstract

Keywords

Get full access to this article

References