A PI state feedback controller for multivariable discrete systems is proposed and the issue of robust controller design is addressed. The resulting design structure, in contrast to other schemes, is always controllable and observable and can thus lend itself for the developing of control algorithms using standard methods such as eigenvalue assignment. Robust performance is achieved through a minimum norm design using a matrix pseudo inverse. Simulation example shows the effectiveness of the resulting controller.
Clarke, D.W., and Gawthrop, P.J.1981. 'Implementation and application of microprocessor-based self-tuners'. Automatica, 17, 233-244.
5.
Davison, E.J., and Smith, H.W.1971. 'Pole assignment in linear time invariant multivariable systems with constant disturbances'. Automatica, 7, 489-498.
6.
Doyle, J.C.1982. 'Analysis of feedback systems with structured uncertainties '. IEEE Proc, 129D, (6), 242.
7.
Doyle, J.C., and Stein, G.1981. 'Multivariable feedback design: concepts for a classical/modern synthesis'. IEEE Trans Automat Contr, AC-26(1), 4-16.
8.
Fukata, S., Mohri, A., and Takata, M.1980. 'On the determination of the optimal feedback gains for multivariable linear systems incorporating integral action'. Int J Control, 31(6), 1027-1040.
9.
Harris, T.J., and MacGregor, J.F.1987. 'Design of multivariable linear-quadratic controller using transfer functions'. AIChE J,33(9), 1481-1495.
10.
Johnson, C.D.1968. 'Optimal control of the linear regulator with constant disturbances'. IEEE Trans Automat Contr, AC-13, 146.
11.
Kautsy, J., Nichols, N.K., and Van Dooren, P.1985. 'Robust pole assignment in linear state feedback', Int J Control, 41, 1129-1155.
12.
Macgregor, J.F., and Wong, A.K.L.1980. 'Multivariable model identification and stochastic control of a chemical reactor', Technometrics, 22, 453.
13.
Morari, M., and Zafiriou, E.1989. Robust process control, Prentice Hall Inc, New Jersey, USA.
14.
Ogata, K.1987. Discrete time control systems. Prentice Hall Inc, New Jersey, USA.
15.
Park, H., and Seborg, D.E.1974. 'Eigenvalue assignment using Proportional-Integral feedback control'. Int J Control, 20, 517-523.
16.
Porter, B., and Crossley, T.R.1970. 'Eigenvalue assignment in linear time-invariant closed-loop systems incorporating multivariable three term controllers'. Int J Control, 11(2), 333-340.
17.
Salama, A.I.A.1985. 'Design techniques of digital PI and PID controllers for linear discrete time multivariable systems'. In: Tzafestas, S. G. (Ed), Applied digital control, Elsevier Science Publishers BU (North-Holland).
18.
Seraji, H.1983. 'Design of digital two- and three-term controllers for discrete-time multivariable systems'. Int J Control, 38(4), 843-865.
19.
Wittenmark, B.1985. 'Design of digital controllers—the servo problem' . In: Tzafestas, S. G. (Ed), Applied digital control, Elsevier Science Publishers BU (North-Holland).
20.
Wonham, W.M.1967. 'On pole assignment in multi-input, controllable linear system'. IEEE Trans Automat Contr, AC-12, 660-665.
21.
Zhu, Z.-X., and Jutan, A.1994. 'Model identification and optimal stochastic control of a multivariable pressure tank system'. Chem Eng Res Des, 72, 64-71.
