Prior design for tomographic volume fraction estimation in pneumatic conveying systems from capacitive data

Abstract

Pneumatic conveying systems have become a standard technique for the transport of bulk materials such as powdery or granulates. The spatial dependence of the material density and the stream velocity in such transport systems require a volumetric measurement principle for flow measurement. In this paper we analyse the capability to estimate the volume fraction from capacitive sensing data using electrical capacitance tomography (ECT). In particular, we investigate the capability of back-projection type imaging algorithms. The ill-posed nature of the imaging problem of ECT require the incorporation of prior knowledge in the design of the estimator. We analyse the different flow profiles in pneumatic conveying in order to generate specific sample-based prior information to improve the estimation performance and robustness. We discuss the construction of different linear image reconstruction algorithms and present a framework, which allows a detailed statistical analysis of the estimator performance. Simulation studies show the estimation behaviour of different algorithms with respect to the incorporated prior information. We demonstrate, that the incorporation of specific prior knowledge leads to an improved estimator behaviour; for example, reduced variance and unbiased estimates. We implemented laboratory experiments in order to analyse the presented approach for the application in real pneumatic conveying processes. We demonstrate the improved robust estimation behaviour by means of comparative reconstruction results obtained with different algorithms and priors. Furthermore, the uncertainty of the estimated volume fraction is analysed in steady state conveying processes. Hereby, it is demonstrated, that appropriate prior information improves the estimation performance also for measurements coming from real pneumatic conveying processes, making ECT a suitable tool for the volume fraction estimation in such transport systems.

Keywords

Pneumatic conveying electrical capacitance tomography inverse problem prior design flow measurement

Get full access to this article

View all access options for this article.

References

Brandstätter

(2003a) Jacobian calculation for electrical impedance tomography based on the reciprocity principle. IEEE Transactions on Magnetics 39(3): 1309–1312.

Brandstätter

Holler

Watzenig

(2003b) Reconstruction of inhomogeneities in fluids by means of capacitance tomography. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 22(12): 508–519.

Cui

Wang

Xue

, et al (2016) A review on image reconstruction algorithms for electrical capacitance/resistance tomography. Sensor Review 36(4): 429–445.

Guan

Wang

Zhang

(2011) Flow patterns of pneumatic conveying of pulverized coal in horizontal pipes for pressurized conditions. In: 2011 Asia-Pacific Power and Energy Engineering Conference, Wuhan, China, 25–28 March 2011, pp. 1–4. Piscataway, New Jersey, US: IEEE.

Hansen

(1998) Rank-Deficient and Discrete Ill-Posed Problems: Numerical Aspects of Linear Inversion. Philadelphia, PA: Society for Industrial and Applied Mathematics(SIAM).

Holder

(2005) Electrical Impedance Tomography, 1st edn. Bristol and Philadelphia: Institute of Physics Publishing.

Hunt

(2014) Weighing without touching: Applying electrical capacitance tomography to mass flowrate measurement in multiphase flows. Measurement and Control 47(1): 19–25.

Jama

Klinzing

Rizk

(2000) An investigation of the prevailing flow patterns and pressure fluctuation near the pressure minimum and unstable conveying zone of pneumatic transport system. Powder Technology 112(1–2): 87–93.

Jaworski

Dyakowski

(2001) Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system. Measurement Science and Technology 12(8): 1109–1119.

10.

Jolliffe

(2002) Principal Component Analysis. New York, NY: Springer.

11.

Kaipio

Somersalo

(2005) Statistical and Computational Inverse Problems. New York: Springer.

12.

Kaipio

Somersalo

(2007) Statistical inverse problems: Discretization, model reduction and inverse crimes. Journal of Computational and Applied Mathematics 198(2): 493–504.

13.

Kay

(1993) Fundamentals of Statistical Signal Processing: Estimation Theory. Upper Saddle River, NJ, USA: Prentice Hall PTR.

14.

Klinzing

Rizk

Marcus

Leung

(2011) Pneumatic Conveying of Solids: A Theoretical and Practical Approach. Netherlands: Springer.

15.

Kraume

(2012) Transportvorgänge in der Verfahrenstechnik. Berlin, Heidelberg: Springer.

16.

Neumayer

Watzenig

Zangl

(2011a) An

H_{\infty}

approach for robust estimation of material parameters in electrical capacitance tomography. Measurement Science and Technology 22(10). DOI: 10.1088/0957-0233/22/10/104004.

17.

Neumayer

Zangl

Watzenig

Fuchs

(2011b) Current reconstruction algorithms in electrical capacitance tomography. In: Mukhopadhyay

Ekuakille

Fuchs

(eds) New Developments and Applications in Sensing Technology. Lecture Notes in Electrical Engineering. Berlin, Heidelberg: Springer, pp. 65–106.

18.

Neumayer

Bretterklieber

(2014) Reduced electrical capacitance tomography sensor for flow profile estimation. In: SENSORS, 2014 IEEE, Valencia, Spain, 2–5 November 2014, pp. 1300–1303. Piscataway, New Jersey, US: IEEE.

19.

Neumayer

Bretterklieber

Flatscher

Puttinger

(2017) PCA based state reduction for inverse problems using prior information. COMPEL – The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 36(5): 1430–1441.

20.

Neumayer

Flatscher

Bretterklieber

Puttinger

(2018a) Prior based state reduction in backprojection type imaging algorithms for electrical tomography. In: 2018 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Huston, Texas, 14–17 May 2018, pp. 1–5. Piscataway, New Jersey, US: IEEE.

21.

Neumayer

Flatscher

Bretterklieber

, et al. (2018b) Optimal design of ect sensors using prior knowledge. Journal of Physics: Conference Series 1047(1): 012012.

22.

Neumayer

Suppan

Bretterklieber

(2019) Statistical Solution of Inverse Problems using a State Reduction. COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 38(5): 1521–1532.

23.

Plaskowski

Beck

Krawaczynski

(1987) Flow imaging for multi-component flow measurement. Transactions of the Institute of Measurement and Control 9(2): 108–112.

24.

Polycarpou

(2006) Introduction to the finite element method in electromagnetics. In: Balanis

(ed.) Synthesis Lectures on Computational Electromagnetics. New York City, New York, United States: Morgan and Claypool, pp. 1–126.

25.

Pugh

(2003) In-line continuous weighing. Measurement and Control 36(1): 21–24.

26.

Sun

Liu

Lei

(2008) Mass flow measurement of pneumatically conveyed solids using electrical capacitance tomography. Measurement Science and Technology 19(4). DOI: 10.1088/0957-0233/19/4/045503.

27.

Suppan

Neumyer

Bretterklieber

Puttinger

(2018) Volume fraction estimation in pneumatic conveying from tomographic measurements. In: 9th World Congress on Industrial Process Tomography WC-IPT-9, Bath, UK, 2–6 September 2018, pp. 667–675. International Society for Industrial Process Tomography (ISIPT).

28.

Watzenig

Fox

(2009) A review of statistical modelling and inference for electrical capacitance tomography. Measurement Science and Technology 20(5): 1–22.

29.

Wegleitner

Fuchs

Holler

Kortschak

(2005) Analysis of hardware concepts for electrical capacitance tomography applications. In: Proceedings of the 4th IEEE Sensor Conference, Orange Country, California, USA, 31 October–3 November 2005, pp. 436–519. Piscataway, New Jersey, US: IEEE.

30.

Wegleitner

Fuchs

Holler

Kortschak

(2008) Development of a displacement current-based sensor for electrical capacitance tomography applications. Flow Measurement and Instrumentation 19(5): 241–250.

31.

White

(2002) Using electrical capacitance tomography to monitor gas voids in a packed bed of solids. Measurement Science and Technology 13(12): 1842–1847.

32.

Yan

Stewart

(2001) Guide to the flow measurement of particulate solids in pipelines Part 1: Fundamentals and principles. Powder Handling & Processing 13(4): 343–352.

33.

Zangl

Watzenig

Steiner

, et al (2007) Non iterative reconstruction for electrical tomography using optimal first and second order approximations. In: 5th World Congress on Industrial Process Tomography WC-IPT-5, Bergen, Norway, 3–6 September 2007, pp. 216–223. International Society for Industrial Process Tomography (ISIPT).