Investigation of the riser cross-sectional aspect ratio effect on the flow dynamics in circulating fluidized beds by electrical capacitance tomography

Abstract

With the increase of capacity, most of the circulating fluidized beds (CFB) risers are constricted to have rectangular cross section. Therefore, it is important to find out the cross-sectional aspect ratio effect on the gas-solids flow characteristics. In this study, a lab-scale CFB with two rectangular risers, which have the aspect ratio of 1:1 and 3:1, respectively, were studied by the electrical capacitance tomography (ECT), with the aided of pressure measurements and computational particle fluid dynamics (CPFD) simulation. Key issues related with ECT sensor design and image reconstruction, such as sensitivity map and excitation frequency, are also discussed. The results show that ECT image quality is affected by the sensitivity map and excitation frequency, and high excitation frequency and voltage are not equivalent of high image quality. In the riser bottom region, cross-sectional aspect ratio has big effect on ECT measured particle distribution and pressure drop, fewer particles are brought away from the bottom when the aspect ratio is larger. Multiple bubbles exist in the bottom region at Ve= 2.7 m/s, and bubble size decreases in the rectangular riser with larger cross-sectional aspect ratio. Static bed height influences the bubble behaviour that bubbles with smaller size scattered around and behave collapse or coalescence in the moving process when the static bed height is high.