Signal processing algorithm for thermal drift compensation in high-temperature down-hole instrumentation systems

Abstract

Down-hole oil and gas industry requirements for measuring thermodynamic and geophysical parameters, for instance pressure, temperature, vibration and multiphase flow, are challenging. Accomplishing these necessities requires a complete signal communications chain of high-performance components and effective signal processing communication techniques to provide system reliability. Nevertheless, noise interference, cable attenuation and thermal drift of the front-end passive electronic elements can lead to poor signal-to-noise ratio (SNR) and possibly loss of the communication link. This paper describes a signal processing algorithm implemented in a bidirectional communication system that exchanges data from a down-hole high pressure and high-temperature (HPHT) measurement tool to the surface installation. The communication channel is a multi-conductor coaxial logging cable also used as a power supply transmission line. The instrumentation system consists of a proprietary down-hole measurement tool, composed of an HPHT sensor and a high-temperature digital signal processor (DSP)-based electronic device; located in the surface installation is a data-acquisition equipment. The system employs a signal processing algorithm, based on the frequency domain SNR characterization of the whole communication chain, which determines in real time the optimal carrier frequency that is automatically implemented in the selected modulation/demodulation technique. The obtained laboratory test results of the down-hole tool, using changes in temperature from 25° to 185°C, provide a firm basis for testing and evaluating the system in the field.

Keywords

Communication system down-hole oil instruments high-temperature electronics

Get full access to this article

View all access options for this article.

References

Belaigues

Paumard

Durand

. (1982) Well logging communication system. US Patent 4,355,310.

Camesa , Technical Reference 999 (2015).

Flagg

(1983) Well logging data transmission system. US Patent 4,415,895.

Gardner

Schultz

(2004) Synchronous CDMA telemetry system for use in a wellbore. US Patent 6,819,260.

Gaydecki

(2004) Foundations of Digital Signal Processing: Theory, Algorithms and Hardware Design. The Institute of Electrical Engineers. ISBN 0-85296-431-5.

Hartmann

Beaumont

(1999) Predicting reservoir system quality and performance. In: Beaumont

Foster

(eds) Treatise of Petroleum Geology/Handbook of Petroleum Geology, AAPG, Special Volumes, Chapter 9. American Association of Petroleum Geologists, pp 9.1–9.54.

Hesbol

Horten

Steigen

(2006) Power line communication device for subsea well. US Patent 2010/0052940 A1.

Lyon

Poonpol

Montgomery

. (1998) Method and apparatus for transmitting and receiving digital data over a band pass channel. US Patent 5,838,727.

Mijarez-Castro

Rodríguez-Rodríguez

Pascacio-Maldonado

. (2013) Communication system for down-hole measurement tools based on real-time SNR characterization in coaxial cable used as communication channel. In: International Conference and Exhibition on High Temperature Electronics Network, Oxford, UK, 8–10 July, pp. 174–183. New York: Curran Associates, Inc. ISBN: 978-1-63439-114-6.

10.

Mijarez-Castro

Pascacio-Maldonado

Guevara-Gordillo

. (2014) Down-hole intelligent communication system based on the real-time characterisation of the attenuation of signals in a coaxial cable used as a transmission medium. Patent publication number WO2014077664 A1.

11.

Neri

(1999) Lineas de Transmision. Mexico: McGraw Hill, ISBN: 970-10-2566-6 (in Spanish).

12.

Proakis

(1989) Digital Communications, 2nd ed. New York: McGraw-Hill. ISBN: 0-07-050937-9.

13.

Tomasi

(2001) Electronic Communications Systems: Fundamentals Through Advanced, 4th ed. Prentice Hall Inc., New Jersey, USA. ISBN 0-13-022125-2.