Sage Journals: Discover world-class research

Abstract

In this paper we present the idea of hybrid servo track writing and give a complete description of the developed hybrid servo track writer platform including its main functions and servo mechanism. The major disturbances and noise level in media-level servo track writing are identified based on the position error signal measured on the hybrid servo track writer platform. A dual-stage servo system, which is applicable in servo writing, is proposed and implemented on the experimental platform. With the disturbances and noise models, an advanced loop-shaping scheme based on Kalman—Yakubovic—Popov lemma is used to optimize the controller for the micro-actuator servo loop. The experimental results show that the tracking accuracy can reach 6 nm, which is able to support a track density of more than 400 000 tracks per inch.

Keywords

dual-stage actuation Kalman—Yakubovic—Popov lemma loop-shaping servo control servo track writing.

Get full access to this article

View all access options for this article.

References

Abramovitch, D. , Hurst, T. and Henze, D. 1998: An overview of pes pareto method for decomposing daseline noise sources in hard disk position error signals. IEEE Trans Magn 34(1), 17-23.

Du, C. and Xie, L. 2006: A generalized kyp lemma based control design and application for 425 ktpi servo track writing. Proc of the 2006 American Control Conference, Minneapolis, 1303-1308.

Du, C. , Xie, L. , Teoh, J.N. and Guo, G. 2008: H2control for head positioning in axial and radial dimensions for self-servo track writing. IEEE Trans Contr Syst Technol 16(1), 177-181.

Ehrlich, R. , Adler, J. and Hindi, H. 2001: Rejecting oscillatory, non-synchronous mechanical disturbance in hard disk drives. IEEE Trans Magn 37(2), 646-650.

Ehrlich, R. and Curran, D. 1999: Major hdd tmr sources and projected scaling with tpi. IEEE Trans Magn 35(2), 885-891.

Ge, S.S. , Ren, B. and Lee, T.H. 2007: Hard disk drive control in mobile applications. System Science and Complexity 20, 215-225.

Guo, G. and Zhang, J. 2003: Control strategies for writing servo tracks narrower than 5 micro inches. Proc of 2003 JSME-IIP/ ASME-ISPS Joint Conf on Micromechatronics for Information and Precision Equipment, 16-18 June, Yokahama, Japan, 1-5.

Herrmann, G. , Ge, S.S. and Guo, G. 2005: Practical implementation of neural network controller in a hard disk drive. IEEE Trans Control Systems Technology 13(1), 146-154.

Ho, H. and Doan, T. 1997: Distortion effects on servo position error transfer function . IEEE Trans Magn 33(4), 2569-2572.

10.

Ho, M.-T. , Datta, A. and Bhattacharyya, S.P. 1997: Control system design using low order controllers: constant gain, PI and PID. Proc American Control Conference , Albuquerque, New Mexico, 571-578.

11.

Hredzak, B. , Guo, G. and Zhang, J. 2003: Investigation of the effect of hard disk drive unbalance on repeatable and non-repeatable runout. Proc of 2003 IEEE International Conf on Power Electronics and Drive Systemsl, Singapore, 1359-1363.

12.

Li, Y. , Horowitz, R. and Evans, R. 2003: Vibration control of a pzt actuated suspension dual-stage servo system using a pzt sensor. IEEE Trans Magn 932-937.

13.

Schultz, M. 2001: A self-servowrite clocking process. IEEE Trans Magn 37(2), 1878-1880.

14.

Takaishi, K. and Uematsu, Y. 2003: Hard disk drive servo technology for media-level servo track writing. IEEE Trans Magn 39(2), 851-856.

15.

Uematsu, Y. , Fukushi, M. and Taniguchi, K. 2001: Development of the pushpin free stw. IEEE Trans Magn 37(2), 964-968.

16.

Ye, H. , Sng, V. , Du, C. , Zhang, J. and Guo, G. 2002: Radial error propagation issues in self servo track writing technology. IEEE Trans Magn 38(5), 2180-2182.

17.

Zhang, J.L. , Hredzak, B. and Du, C.L. 2007: High density servo track writing using two-stage configuration . Proc Int Conf IEEE, Control Applications, 1-3 October, Singapore, 124-129.

18.

Zheng, J. , Du, C. , Guo, G. , Wang, Y. , Zhang, J. , Li, Q. and Hredzak, B. 2006: Phase lead peak filter method to high TPI servo track writer with microactuators. Proc American Control Conference, Minneapolis, MN, 1309-1314.

Measurement and modelling of disturbances in a servo track writer and advanced loop shaping to achieve higher track density

Abstract

Keywords

Get full access to this article

References