Optimization of energy absorption and vibration behaviour of TPMS Schwarz P and Schoen Gyroid lattice structures using Taguchi L9 orthogonal array

Abstract

In this study, the optimization of printing parameters in fused deposition modeling (FDM) is addressed, focusing on their impact on energy absorption and vibration behaviour of triply periodic minimal surface (TPMS) lattice structures, specifically Pseudo-periodic-based Schwarz P and Schoen Gyroid designs. The experimental design employs a Taguchi L9 orthogonal array involving layer height (0.15 mm, 0.30 mm, 0.45 mm), build orientation (0°, 45°, 90°), and extruder temperature (190°C, 200°C, 210°C) as inputs. These lattice structures are generated through Math Mod and simulated using Blender, with Autodesk Mesh mixer refining the STL file. The lattice fabrication employs PLA (polylactic acid). Comparative analysis is conducted against a high-density solid structure lacking lattice design. Optimal parameters for Schwarz P lattice are found to be 0.45 mm layer height, 0° build orientation, and 200°C extruder temperature, while for Schoen Gyroid lattice, 0.30 mm layer height, 0° build orientation, and 210°C extruder temperature. Solid structure optimization yields 0.30 mm layer height, 90° build orientation, and 190°C extruder temperature. Solid structures outperform Schwarz-P and Schoen-Gyroid in energy absorption and vibration behaviour, with Schwarz P showing superior properties over Schoen Gyroid.