An attempt has been made to establish a reasonably accurate microkinetics model for accelerated sulfur vulcanization of commonly used acrylonitrile rubber/polyvinyl chloride (NBR/PVC 70/30) blend (NVC73) from a single, isothermal rheograph data of torque versus time. The effect of three different types of fillers, such as pre-exfoliated organically modified montmorillonite (OMMT) clay, graphite (GRT) powder, and high abrasion furnace (HAF) carbon black (CB), were studied. The kinetics study was done with six solid-state reaction kinetics models. Among these, Sestak-Berggren (SB) equation was found to be the best model for the present compositions. The SB kinetic rate expressions were evolved after several iterations using empirical values of autocatalytic and non-autocatalytic orders of ‘m’ and ‘n’, respectively. The gum vulcanizate and OMMT clay-loaded compositions were found to have comparable conversion function f(α) and almost identical reaction rate constants at 150°C, under isothermal conditions. In comparison, HAF CB and GRT rate expressions differed from clay-loaded compositions. The validity of the reaction rate equations obtained was confirmed by comparison of plots for experimental and derived conversions with time.
MansourSAEl-GhouryMEShalaanE, et al.Thermal properties of graphite-loaded nitrile rubber/poly(vinyl chloride) blends. J Appl Polym Sci2010; 116: 3171–3177.
6.
KaushikSD. Effect of plasticizers on polyblends of acrylonitrile-butadiene rubber (NBR) and Polyvinyl Chloride (PVC). J Appl Chem2017; 6(4): 628–631.
7.
Al-MaamoriMHAl-MosawiAIYasserHA. Mechanical behavior of NBR/PVC mixture after immersion in different media. J Mater Res2015; 2(3): 31–34.
8.
HajibabaANaderiGGhoreishyM, et al.Effect of single-walled carbon nanotubes on morphology and mechanical properties of NBR/PVC blends. Iran Polym J (Engl Ed)2012; 21: 505–511.
9.
HajibabaANaderiGEsmizadehE, et al.Morphology and dynamic-mechanical properties of PVC/NBR blends reinforced with two types of nanoparticles. J Compos Mater2014; 48: 131–141.
10.
LuongPhamNHPhamTTCongLeN, et al.Study on the effect of carbon black, carbon nanotube on the properties of rubber blend acrylonitrile butadiene rubber (NBR)/polyvinyl chloride (PVC). Vietnam J Chem2017; 55: 627–632.
11.
HanhuaLLiWGuojunS. Study of NBR/PVC/OMMT Nanocomposites prepared by mechanical blending. Iran Polym J (Engl Ed)2010; 19(1): 39–46.
12.
GhoshPSenAKRayP. Crosslinking in blends of nitrile rubbers and poly(vinyl chloride). Polymer1992; 33: 744–754.
13.
Shokri1AABakhshandehGFarahaniTD. An investigation of mechanical and rheological properties of NBR/PVC blends: influence of anhydride additives, mixing procedure and NBR form. Iran Polym J (Engl Ed)2006; 15(3): 227–237.
14.
Al-MaamoriMHAl-MosawiAIAbdulsadaSA, et al.Rheological properties of NBR/PVC Blend. EC Chemistry2015; 1: 25–29.
15.
ManojNRDePP. An investigation of the chemical interactions in blends of poly(vinyl chloride) and nitrile rubber during processing. Polymer1998; 39(3): 733–741.
16.
LapaVLDCVisconteLLYAffonsoJEDS, et al.Aluminum hydroxide and carbon black filled NBR/PVC composites - Vulcanization and processability studies. Polym Test2002; 21: 443–447.
17.
HafeziMKhorasaniSNZiaeiF. Application of Taguchi method in determining optimum level of curing system of NBR/PVC blend. J Appl Polym Sci2006; 102: 5358–5362.
18.
HafeziMKhorasaniSNZiaeiF, et al.Comparison of physicomechanical properties of NBR-PVC blend cured by sulfur and electron beam. J Elastomers Plast2007; 39: 151–163.
19.
FathyESElnaggarMYHassanMM. Thermo-mechanical properties of polyvinyl chloride/vulcanized nitrile butadiene rubber blends cured by gamma irradiation. Egy J Radia Sci Appl2018; 31(1): 1–11.
20.
Wahyu SyabaniaMPambudiaWHermiyatiaI, et al.Vulcanization kinetics study of rubber compounds having different fillers particle size. J Indus Innov2022; 1: 34–46.
21.
SestakJSatavaVWendlandtWW. The study of heterogeneous processes by thermal analysis. Thermochim Acta1973; 7: 333.
22.
HendersonDW. Experimental analysis of non-isothermal transformations involving nucleation and growth. J Therm Anal1979; 15: 325–331.
23.
StrømmeKO. On the application of the Avrami-Erofeev equation in non-isothermal reaction kinetics. Thermochim Acta1986; 97: 363–368.
24.
KamalMRSourourSRyanM. Kinetics and thermal characterization of thermoset cure. Polym Eng Sci1973; 13: 59–64.
25.
ŠestákJBerggrenG. Study of the kinetics of the mechanism of solid-state reactions at increasing temperatures. Thermochim Acta1971; 3: 1–12.
26.
FlynnJH. The isoconversional method for determination of energy of activation at constant heating rates: corrections for the doyle approximation. J Therm Anal1983; 27: 95–102.
27.
VyazovkinS. Alternative description of process kinetics. Thermochim Acta1992; 211: 181–187.
28.
VyazovkinSVLesnikovichAI. Practical application of isoconversional methods. Thermochim Acta1992; 203: 177–185.
29.
VyazovkinSLinertW. Evaluation and application of isokinetic relationships: the thermal decomposition of solids under nonisothermal conditions. J Chem Inf Comput Sci1994; 34: 1273–1278.
30.
VyazovkinSDollimoreD. Linear and nonlinear procedures in isoconversional computations of the activation energy of nonisothermal reactions in solids. J Chem Inf Comput Sci1996; 36: 42–45.
31.
VyazovkinSWightCA. Model-free and model fitting approaches to kinetic analysis of Isothermal and Non-isothermal data. Thermochim Acta1999; 340: 53–68.
32.
VyazovkinS. Modification of the integral isoconversional method to account for variation in the activation energy. J Comput Chem2001; 22: 178–183.
33.
StarinkMJ. The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods. Thermochim Acta2003; 404: 163–176.
34.
KhawamAFlanaganDR. Role of isoconversional methods in varying activation energies of solid-state kinetics: II. Nonisothermal kinetic studies. Thermochim Acta2005; 436: 101–112.
35.
CaiJChenS. A new iterative linear integral isoconversional method for the determination of the activation energy varying with the conversion degree. J Comput Chem2009; 30: 1986–1991.
36.
MichaelSMarkusS. Kinetic prediction of fast curing polyurethane resins by model-free isoconversional methods. Polymer2018; 10: 698–712.
37.
SbirrazzuoliN. Determination of pre-exponential factors and of the mathematical functions f(α) or G(α) that describe the reaction mechanism in a model-free way. Thermochim Acta2013; 564: 59–69.
38.
MoaddabAKalaeeMMazinaniS, et al.Cure kinetics and final performance of styrene butadiene styrene block copolymer/silica nanocomposites. Rubber Chem Technol2015; 88: 53–64.
39.
AkhlaghiSKalaeeMJowdarE, et al.Simultaneous study of cure kinetics and rheology of montmorillonite/vinyl ester resin nanocomposites. Polym Adv Technol2012; 23: 534–544.
40.
KalaeeMRFamiliMHNMahdaviH. Cure kinetic of poly (alkyltetrasulfide) using a rheological method. Polym Plast Technol Eng2009; 48: 627–632.
41.
GopisathiSParkCHuhYIL, et al.Enhancing the reversion resistance, crosslinking density and thermo-mechanical properties of accelerated sulfur cured chlorobutyl rubber using 4,4′-BIS (maleimido) diphenyl methane. Rubber Chem Technol2019; 92: 110–128.
42.
DingRLeonovAI. A kinetic model for sulfur accelerated vulcanization of a natural rubber compound. J Appl Polym Sci1996; 61: 455–463.
43.
WeiY-CLiuG-XZhangH-F, et al.Non-rubber components tuning mechanical properties of natural rubber from vulcanization kinetics. Polymer2019; 183: 121911–121917.
44.
LuburaJKojićPPavličevićJ, et al.A novel approach for simulation and optimization of rubber vulcanization. Polymer (Basel)2023; 15(7): 1750.
45.
ZhangZJiaXGuoF, et al.Numerical analysis of heat transfer and chemical reaction coupling in the rubber seal vulcanization process. Rubber Chem Technol, 2022; 95 (2): 342–358.
46.
ManoharDMChakrabortyBBegumSS. Study of the effect of graphite filler on the vulcanizing behavior and properties of nitrile rubber and NBRPVC blends. J Polym Mater2021; 37: 91–107.
47.
ChakrabortyBCRatnaD. Viscoelasticity in polymers for vibration damping applications. Oxford, UK: Elsevier, 2020, pp. 122–123.
48.
DharmarajMMChakrabortyBCBegumSS. The effect of graphene and nanoclay on properties of nitrile rubber/polyvinyl chloride blend with a potential approach in shock and vibration damping applications. Iran Polym J (Engl Ed)2022; 31: 1129–1145.
49.
HuangLHYangXGaoJ. Study on microstructure effect of carbon black particles in filled rubber composites. Int J Polym Sci2018; 2018: 1–11.
50.
AvramiM. Kinetics of phase change. I: general theory. J Chem Phys1939; 7: 1103–1112.
51.
GutzowITodorovaSJordanovN. Kinetics of chemical reactions and phase transitions at changing temperature: General reconsiderations and a new approach. Bulg Chem Commun2010; 42: 79–102.
