Polyurethanes from modified castor oil and chitosan

Abstract

Polyurethanes (PUs) from castor oil (CO), modified CO (MCO) by transesterification reaction, isophorone diisocyanate (IPDI) in an NCO/OH ratio equal to 1, and chitosan (CS) were synthesized to assess their potential as biomaterials. PUs were characterized by Fourier transform infrared spectroscopy, hydroxyl value (ASTM D1957), thermogravimetric analysis, Shore A hardness (ASTM D2240), and scanning electronic microscopy (SEM). Also, contact angle, water retention and in vitro degradation in PBS, and cell viability on fibroblast were performed. The hydroxyl value confirms CO modification, and IR analysis confirms urethane bond formation. The thermal assay does not show new degradation stages and polyol with a high functionality had better hardness performance due to the increase in cross-linking. The micrograph shows micro-phase separation of both polymers. The contact angle shows the hydrophobic surface with an angle over 65°, and the CS and polyol type do not affect swelling and in vitro degradation due to phase separation between both polymers. The cell viability was over 70% in all cases, and solid polymers and degradation products involve non-cytotoxic effects on the samples. The results suggest a potential for these formulations in the biomedical field.