This study determines the applicability of nanofillers (silica, boron nitride, and zinc oxide) in linear low-density polyethylene (LLDPE)/silicone rubber (SR) insulation compounds. Design of experiment is adopted to model the relationship between the properties (permittivity, loss tangent, dielectric strength, and volume resistivity) and factors (SR content, type of nanofiller, and nanofiller loading) for performance optimization. It is observed that SR content and type of nanofiller significantly influence the electrical properties of LLDPE/SR nanocomposites. Nanofiller loading, however, causes a small variation in the properties of the nanocomposites except for dielectric strength. From the optimization, it is found that the optimum formulation composition is 10 wt% of SR and 2 vol% of nanoboron nitride.
SoundarajanEJacksonEKingA. Performance of novel high voltage outdoor thermoplastic elastomeric insulators. In: Conference on Electrical Insulation and Dielectric Phenomena, Albuquerque, New Mexico, USA, 19–22 October 2003, pp. 422–425. New York, NY: IEEE.
3.
SundararajanROlaveCRomeroE. Modified IEC 5000-h multistress aging of 28-kV thermoplastic elastomeric insulators. IEEE Trans Pow Deliv2007; 22(2): 1079–1085.
4.
JanaRNNandoGB,KhastgirD. Compatibilised blends of LDPE and PDMS rubber as effective cable insulants. Plast Rubber Compos2003; 32: 11–20.
5.
MaBAnderssonJ,GubanskiSM. Evaluating resistance of polymeric materials for outdoor applications to corona and ozone. IEEE Trans Dielectr Electr Insul2010; 17: 555–565.
6.
GiriRNaskarK,NandoGB. Effect of electron beam irradiation on dynamic mechanical, thermal, and morphological properties of LLDPE and PDMS rubber blends. Radiat Phys Chem2012; 81: 1930–1942.
7.
JanaRNBhuniaHP,NandoGB. An investigation into the mechanical properties and curing kinetics of blends of low-density polyethylene and polydimethyl siloxane rubber. Thermochim Acta1997; 302: 1–9.
8.
JanaRNNandoGB. Effect of ethylene copolymers as polymeric compatibilizers for LDPE and PDMS rubber blends. J Elastomers Plast2004; 36: 125–142.
9.
Jalali-AraniAKatbabAA,NazockdastH. Preparation of thermoplastic elastomers based on silicone rubber and polyethylene by thermomechanical reactive blending: effects of polyethylene structural parameters. J Appl Polym Sci2003; 90: 3402–3408.
10.
Jalali-AraniAKatbabAA,NazockdastH. Thermomechanical reactive blending of silicone rubber and LLDPE: effects of processing parameters. J Appl Polym Sci2005; 96: 155–161.
11.
SureshkumarMSNaskarKNandoGB. Optimization of process parameters of immiscible blends of linear low-density polyethylene and poly dimethyl siloxane rubber using Taguchi methodology. Polym Plast Technol Eng2008; 47: 37–41.
12.
SureshASureshkumarMSKarguptaK. Predicting physico-mechanical properties of LLDPE and PDMS rubber blends using ANFIS-based model. Plast Rubber Compos2009; 38: 173–182.
13.
GiriRNaskarK,NandoGB. In-situ compatibilization of linear low-density polyethylene and polydimethyl siloxane rubber through reactive blending. Mater Express2012; 2: 37–50.
14.
MahmoudiJEesaeeM,VakilianM. Electrical and mechanical characterization of high-density polyethylene/ethylene vinyl acetate/organoclay nanocomposite. IEEE Trans Dielectr Electr Insul2013; 20: 1772–1779.
15.
PreethaPThomasMJ. AC breakdown characteristics of epoxy nanocomposites. IEEE Trans Dielectr Electr Insul2011; 18: 1526–1534.
16.
ChiengBWIbrahimNA,YunusWMZW. Optimization of tensile strength of poly(lactic acid)/graphene nanocomposites using response surface methodology. Polym Plast Technol Eng2012; 51: 791–799.
17.
SridharVShanmugharajAMKimJK. Optimization of carbon black and nanoclay filler loading in chlorobutyl vulcanizates using response surface methodology. Polym Compos2009; 30(6): 691–701.
18.
MuthukumarMMohanD. Optimization of mechanical properties of polymer concrete and mix design recommendation based on design of experiments. J Appl Polym Sci2004; 94: 1107–1116.
19.
GeorgeSVarugheseKT,ThomasS. Dielectric properties of isotactic polypropylene/nitrile rubber blends: effects of blend ratio, filler addition, and dynamic vulcanization. J Appl Polym Sci1999; 73: 255–270.
20.
SinghaSThomasM. Dielectric properties of epoxy nanocomposites. IEEE Trans Dielectr Electr Insul2008; 15: 12–23.
21.
ShiHGaoNJinH. Investigation of the effects of nano-filler on dielectric properties of epoxy based composites. In: IEEE 9th international conference on the properties and applications of dielectric materials, Harbin, China, 19–23 July 2009, pp. 804–807. New York, NY: IEEE.
22.
SarathiRSahuRK,RajeshkumarP. Understanding the thermal, mechanical and electrical properties of epoxy nanocomposites. Mater Sci Eng A2009; 446: 567–578.
23.
ChenGSadipeJTZhuangY. Conduction in linear low density polyethylene nanodielectric materials. In: IEEE 9th international conference on the properties and applications of dielectric materials, Harbin, China, 19–23 July 2009, pp. 845–848. New York, NY: IEEE.
24.
TanDQChenQIrwinP. Effect of polar particles on polymer composite dielectrics. IEEE Trans Ultrason Ferroelectr Freq Control2013; 60: 1619–1624.
25.
MaDHugenerTASiegelRW. Influence of nanoparticle surface modification on the electrical behaviour of polyethylene nanocomposites. Nanotechnology2005; 16(6): 724–731.
26.
HuangXJiangP,TanakaT. A review of dielectric polymer composites with high thermal. IEEE Electr Insul Mag2011; 27: 8–16.
27.
TjongSCLiangGD,BaoSP. Electrical properties of low density polyethylene/ZnO nanocomposites: the effect of thermal treatments. J Appl Polym Sci2006; 102: 1436–1444.
28.
AndritschTKochetovRGebrekirosYT. Short term DC breakdown strength in epoxy based BN nano-and microcomposites. In: 10th IEEE international conference on solid dielectrics, Postdam, Germany, 4–9 July 2010, pp. 1–4. New York, NY: IEEE.
29.
NaiduMSKamarajuV. High Voltage Engineering. New Delhi: Tata McGraw-Hill Publishing Company Limited, 2004.
