Sage Journals: Discover world-class research

Abstract

Natural rubber (NR)-based elastomer, by virtue of its amenability to yield shear modulus at 3.5 kg/cm² shear stress as low as 1.6–2.0 kg/cm², is the most preferred elastomer for the realization of flex seals that are used for the thrust vector control of large rocket motors. Despite the utmost care taken during compounding, there exists a high degree of uncertainty in achieving required shear modulus primarily because of complexity involved in compounding to obtain high degree of homogeneity of the NR compound. Assessing the quality of NR compound is a tedious and time-taking process since it involves the preparation and testing of standard quadruple lap shear (QLS) specimens. Any non-conformance in shear modulus calls for fine-tuning of NR formulation; remaking of QLS specimens to recheck shear modulus leads to huge time delay and wastage of materials. The authors have meticulously generated oscillatory disc rheometer (ODR) data in comparison with QLS test results for various NR compounds and introduced ODR as an effective quality assurance tool. This article demonstrates how, based on ODR data, shear modulus can be predicted, thereby corrective actions can be taken in NR compound quickly and the appropriate vulcanization scheme can be prescribed for the given NR compound, which will prevent reversion and ensure optimum vulcanization, thereby eliminate the causes for shear modulus increase during storage of flex seals.

Keywords

Flex seal natural rubber shear modulus oscillatory disc rheometer quadruple lap shear properties maximum torque minimum torque vulcanization

Get full access to this article

View all access options for this article.

References

NASA. NASA SP-8115- Solid Rocket Motor Nozzles. Nasa Space Vehicle Design Criteria (Chemical). Washington: NASA; 1975, p. 140.

Bolner

. Low torque flex-seal bearing for thrust vector nozzles for solid propellant rocket motors. Patent 3,468,588, USA, 1969.

Sutton

Biblarz

. Rocket propulsion elements. 7th ed. New York: Wiley Interscience Publication, 2001, p. 553.

Woodberry

RHF.

Solid rocket thrust vector control. NASA SP-8114, December 1974, pp. 4–17.

Shivaramakrishnan

Bhagawan

. Characterization of natural rubber-based flex nozzle material for solid rocket motors. In: IRMRA 15th rubber conference, India, 1992, pp. 221–230.

Ram Mohan

CHV

Ramanathan

Kumar

. Characterisation of materials used in flex bearings of large solid rocket motors. Def Sci J 2011; 61(3): 264–269.

Descamps

Gautronneau

Rousseau

. P80 SRM low torque flex-seal development − thermal and chemical modeling of molding process. Prog Propulsion Phys 2009; 1: 141–152.

Chandrasekhar Reddy

Srinivasa Rao

. Development & experimental characterization of flexible joint for air borne propulsion system. IJMETMR 2016; 3(6): 209–214.

BS 903 Part A14. Method for determination of modulus in shear or adhesion to rigid plates – Quadruple shear method. 1992.

10.

Decker

Wise

Guerry

. An oscillating disk rheometer for measuring dynamic properties during vulcanization. Rubber Chem Technol 1963; 36(2): 451–458.

11.

ASTM D2084-11. Standard test method for rubber property – Vulcanization using oscillating disc cure meter. West Conshohocken: ASTM International, 2011.

Oscillatory disc rheometer

Abstract

Keywords

Get full access to this article

References