Injection moulding of high precision optics for light-emitting diodes made of liquid silicone rubber

Abstract

In the market of lighting technologies, light-emitting diodes (LEDs) gradually substitute conventional light sources. Because of their high energy efficiency and long lifetime, they are increasingly used in consumer products, interior and exterior lighting applications in the home and mobility sector as well as in industrial applications. The material properties in the surrounding area of the light-emitting semiconductor chip are crucial to the performance of LED. Although the energy efficiency of LED is higher compared to conventional light sources, temperatures exceed about 150°C close to the semiconductor chip. Especially in combination with high amounts of blue ultraviolet (UV) radiation, the materials for encapsulation cannot meet the requirements and reduce the lifetime of an LED significantly. Contrary to conventional materials, high transparent liquid silicone rubber (LSR) can resist high temperatures as well as UV radiation and offer a great freedom in design. This enables the combination of the encapsulation (primary optics) and the secondary optics in one component. The objective of an ongoing joint research project with various partners from the industry is the development of an innovative injection moulding process for high precision optics in LED applications made of LSR, which is analysed at the Institute of Plastics Processing (IKV), Aachen, Germany. Therefore, the LED board is placed in the injection mould and overmoulded with LSR. The goal is a highly integrated process with major emphasis on the reduction of components, mounting steps and costs. Furthermore, the combination of primary and secondary optics promises an improved effectiveness because losses in light power due to the transition of the primary and secondary optics are reduced.

Keywords

Light-emitting diode (LED)plastics optics liquid silicone rubber (LSR)injection moulding

Get full access to this article

View all access options for this article.

References

US Department of Energy. Energy efficiency of LEDs Building Technologies Program, Solid-State Lighting Technology Fact Sheet, 2013.

Angermaier

Müller

. Zeit und Kosten sparen. Kunststoffe 2010; 4: 73–76.

Döbler

Schiemann

. Linsenoptiken von LEDs aus Polycarbonat. Kunststoffe 2006; 11: 116–117.

Hodgin

. Epoxies for OptoElectronic Packaging; Applications and Material Properties. Journal of Microelectronics and Electronic Packaging, 04 2004, Vol. 1, No. 2, pp. 108–116.

Kräuter

. Transparente Kunststoffe für LED-Anwendungen. In: Proceedings of the conference Herstellung und Untersuchung von optischen Kunststoffprodukten, SKZ - ConSem GmbH, Frankfurter Str. 15–17, 97082, Deutschland, FSKZ e. V., Würzburg, 12–13th July 2007, pp. 1–10.

Chang

Das

Varde

. Light emitting diodes reliability review. Microelectron Reliab 2012; 7: 762–782.

Bayerl

High transparent LSR – material between polymer and glass. In: Proceedings of the conference Aachen Polymer Optics Days, Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V., Aachen, 8–9th April, 2014.

Müller

Silicone – Höchste Transparenz und Beständigkeit für Optoanwendungen. In: Proceedings of the conference Optische Kunststoff-Formteile in Design und Technik, FSKZ e. V., Würzburg, Germany, 30th June to 1st July, 2011.

Wrobel

. Flüssigsilikonkautschuk (LSR) für optische Anwendungen. In: Proceedings of the conference Optische Komponenten aus Kunststoff – Die gesamte Prozesskette im Blick, Institut für Kunststoffverarbeitung (IKV) in Industrie und Handwerk, Aachen, Germany, 6–7th April, 2011.

10.

Ronnewinkel

. Mehrkomponentenspritzgießen von Flüssigsilikon-Thermoplast-Verbundbauteilen, PhD Thesis, RWTH Aachen University, Aachen, Germany, 2000.

11.

Angermaier

Müller

. Verfahren zur Herstellung von Siliconformkörpern aus durch Licht vernetzbaren Siliconmischungen. Patent DE102008043316 A1, Germany, 2010.

12.

Fischer

Kaup

. Scheinwerfer der Zukunft. Optik Photonik 2013; 3: 52–56.

13.

Fischer

Kaup

Klingen

. Beleuchtungsvorrichtung für Fahrzeuge. Patent DE102012108175 A1, Germany, 2014.

14.

Hwang

Franssen

Bayerl

. Durable versatile optically clear ultra clear liquid silicone rubber for innovative optical solutions in lighting. In: Proceedings of the China Plastics Conference-Medical Devices & Packaging 2013 of the Society of Plastics Engineering (SPE), Shanghai, China, 2013.

15.

Hagen

Röhr

Sensoranordnung für ein Kraftfahrzeug. Patent DE102008028979 A1, Germany, 2009.

16.

Brendle

. Farbkorrigierende projektionsoptik eines lichtmoduls eines kraftfahrzeugscheinwerfers, verfahren zur herstellung einer solchen projektionsoptik und projektionsmodul eines kraftfahrzeugscheinwerfers mit einer solchen projektionsoptik. Patent DE102011004086A1, Germany, 2012.

17.

Hopmann

Röbig

Kaup

. Herstellung einer kombinierten Primär- und Vorsatzoptik einer LED aus LSR mittels innovativer Werkzeugtechnik. Gummi Fasern Kunststoffe 2015; 2: 104–107.

18.

Hopmann

Röbig

. Injection molding of high precision optics for LED application made of liquid silicone rubber. In: Proceedings of the Polymer Processing Society 31th Annual Meeting (PPS). Jeju Island, Korea, 2015.

19.

Huhn

. Anforderungen an eine adaptive Lichtverteilung für Kraftfahrzeugscheinwerfer im Rahmen der ECE-Regelungen. PhD Thesis, Technische Universität Darmstadt, Germany, 1999.