Sage Journals: Discover world-class research

Abstract

Embossing is an established process for the thermoplastic elastomers but not yet for the thermosetting elastomers. It has already been shown that hot embossing is a viable technology for imprinting microstructures in addition to curing thin silicone films at their gel point. It is one of the simplest, most cost-effective, and time-saving methods for replicating microstructures. In the present study, films made from liquid silicone rubber (LSR) formulations containing fillers are hot embossed under modified operating conditions. The use of such relatively hard silicone elastomers shows the versatility of this method that has been established for softer silicone elastomers. Also, as a proof of concept, a microstructured metal (nickel (Ni)) plate is used as an embosser for the films successfully. The ideal condition for hot embossing the LSR formulation (XLR 630 with titanium dioxide fillers) with a Ni embosser is 110°C preheating for 15–35 s, embossed with 2 bar pressure, and postheating for complete curing at 110°C for 3 min showing that the process is extremely fast.

Keywords

Hot embossing liquid silicone rubber (LSR) with fillers DEAP transducer microscale corrugations

Get full access to this article

View all access options for this article.

References

Benslimane

Kiil

Tryson

. Electromechanical properties of novel large strain poly power film and laminate components for DEAP actuator and sensor applications. In: Proceedings of SPIE on electroactive polymer actuators and devices (EAPAD)(ed Y Bar-Cohen), San Diego, California, March 2010, paper no. 764231, pp. 1–11. California, CA: SPIE.

Kiil

Benslimane

. Scalable industrial manufacturing of DEAP. In: Proceedings of SPIE on electroactive polymer actuators and devices (EAPAD)(ed Y Bar-Cohen), San Diego, California, March 2009, paper no. 72870R, pp. 1–10. California, CA: SPIE.

Vudayagiri

Junker

Skov

. Factors affecting surface and release properties of thin polydimethylsiloxane films. Polym J 2013; 45(8): 871–878.

Pelrine

Kornbluh

Pei

. High-speed electrically actuated elastomers with strain greater than 100%. Science 2000; 287(5454): 836–839.

Koh

SJA

Keplinger

. Dielectric elastomer generators: how much energy can be converted? IEEE/ASME Trans Mechatron 2011; 16(1): 33–41.

Vudayagiri

Hassouneh

. Hot embossing of microstructures on addition curing polydimethylsiloxane films. J Elastom Plast. Epub ahead of print 11 4 2013. doi:10.1177/0095244313483642.

Benslimane

Kill

Tryson

. Dielectric electro-active polymer push actuators: performance and challenges. Polym Int 2010; 59(3): 415–421.

Stritzke

. Custom molding of thermoset elastomers—a comprehensive approach to materials, mold design, and processing. ISBN: 978-3-446-41964-3, Cincinnati, OH, USA: Hanser Publications, 2009, pp. 132–141.

Winter

Chambon

. Analysis of linear viscoelasticity of a cross-linking polymer at the gel point. J Rheol 1986; 30: 367–382.

10.

Chambon Winter

. Linear viscoelasticity at the gel point of a crosslinking PDMS with imbalanced stoichiometry. J Rheol 1987; 31(8): 683–697.

11.

Winter

. Can the gel point of a cross-linking polymer be detected by the G′-G′′ crossover? Polym Eng Sci 1987; 27(22): 1698–1702.

12.

Lewis

Stein

Gao

. Platinum catalysts used in the silicones industry. Platinum Metal Rev 1997; 41(2): 66–75.

13.

Ramesh

Tock

Narayan

. Property evaluation of silicone elastomers used in tension-adhesion joints. J Mater Sci Lett 1995; 14: 964–967.

Techniques for hot embossing microstructures on liquid silicone rubbers with fillers

Abstract

Keywords

Get full access to this article

References